NIST logo

Publications Portal

You searched on:
Topic Area: Ceramics
Sorted by: title

Your search results exceeded 1,000 records. Please refine your search and try again.
Displaying records 21 to 30 of 1000 records.
Resort by: Date / Title


21. A Universal Relation for Edge Chipping From Sharp Contacts in Brittle Materials and It's Use as a Simple Means of Toughness Evaluation
Topic: Ceramics
Published: 11/24/2006
Authors: Herzl Chai, Brian Ronald Lawn
Abstract: An analysis of chipping fracture in brittle solids is presented. Cracks are introduced into the edges of selected materials, including soda-lime glass and fine-grain ceramics, using a Vickers indenter in monotonic loading. The ensuing chip morpholo ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=850142

22. A chemical kinetics model to predict lubricant performance in a diesel engine. Part I: Simulation methodology
Topic: Ceramics
Published: 2/1/2003
Authors: C I Chen, Stephen M. Hsu
Abstract: The ability of the lubricant to protect the increasingly complex diesel engines directly affects engine durability and warranty costs and is becoming increasing costly to validate. This paper presents a novel approach to evaluate lubricant performanc ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=850311

23. A high-throughput thermoelectric power-factor screening tool for rapid construction of thermoelectric property diagrams
Topic: Ceramics
Published: 9/24/2007
Authors: Makoto Otani, N D Lowhorn, Peter K. Schenck, Winnie K Wong-Ng, Martin L Green, K Itaka, H Koinuma
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=854387

24. A1-L1^d0^ Phase Boundaries and Anisotropy Via Multiple-Order-Parameter Theory for an FCC Alloy
Topic: Ceramics
Published: 9/1/2003
Authors: G B Tanoglu, Richard J Braun, John Werner Cahn, Geoffrey B McFadden
Abstract: The dependence of thermodynamic properties of planar interphase boundaries (IPBs) and antiphase boundaries (APBs) in a binary alloy on an FCC lattice is studied as a function of the orientation of their normal with respect to the underlying lattice. ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=850072

25. ACerS-NIST Phase Equilibria Diagrams Volume XIV Oxides
Topic: Ceramics
Published: Date unknown
Authors: Robert S. Roth, Terrell A Vanderah
Abstract: This volume is the fourteenth of the topically-oriented series of phase diagram compilations and the tenth to appear since the National Institute of Standards (NIST) and the American Ceramic Society (ACerS) embarked on a jointly-sponsored expanded Ce ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=850874

26. Ab-Initio Energetics of Transition Metal Ordering in Decagonal Al-Co-Cu
Topic: Ceramics
Published: 1/21/2000
Authors: M Widom, I Al-Lehyani, Yijun Wang, Eric J Cockayne
Abstract: We perform ab-initio total energy calculations for approximants to a model of decagonal A1CoCu. These calculations support previously proposed chemical ordering of Co and Cu atoms along tile edges. Preferred arrow orientations are identified and sho ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=850350

27. Abrasive Machining of Glass-Ceramics With a Dental Handpiece
Topic: Ceramics
Published: 7/1/2000
Authors: X Dong, L Yin, S Jahanmir, L K Ives, E D Rekow
Abstract: Machinable glass ceramics are used to prepare dental restorations with modern dental CAD/CAM systems. Unfortunately, little is understood about the influence of mahining parameters on material removal rates and any damage which could be introduced i ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=850331

28. Abrasive Machining of Glass-Infiltrated Alumina with Diamond Burs
Topic: Ceramics
Published: Date unknown
Authors: L Yin, L K Ives, S Jahanmir, E D Rekow, E Romberg
Abstract: The abrasive machining characteristics of a glass-infiltrated dry-pressed alumina used for fabrication of all-ceramic dental crowns are investigated using a high-speed dental handpiece and diamond burs containing supercoarse (180 m), fine (40 m), and ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=850332

29. Abrasive Machining of Porcelain and Zirconia With a Dental Handpiece
Topic: Ceramics
Published: 9/1/2003
Authors: L Yin, S Jahanmir, L K Ives
Abstract: The machining characteristics and material removal mechanisms of two dental ceramics feldspathic porcelain and yttria-stabilized tetragonal zirconia - were investigated using a dental handpiece and diamond burs with different grit sizes. The materia ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=850647

30. Abstracts for the MSEL Assessment Panel, March 2001
Topic: Ceramics
Published: 1/26/2001
Authors: Leslie E Smith, Alamgir Karim, Leonid A Bendersky, C Lu, J J Scott, Ichiro Takeuchi, Kathleen M. Flynn, Vinod K Tewary, Davor Balzar, G A Alers, Stephen E Russek, Charles C. Dr. Han, Haonan Wang, William E Wallace III, Daniel A Fischer, K Efimenko, Wen-Li Wu, Jan Genzer, Joseph C Woicik, Thomas H. Gnaeupel-Herold, Henry Joseph Prask, Charles F Majkrzak, Norman Frederic Berk, John G Barker, Charles J. Glinka, Eric K Lin, Ward L Johnson, Paul R Heyliger, David Thomas Read, R R Keller, J Blendell, Grady S White, Lin-Sien H Lum, Eric J Cockayne, Igor Levin, C E Johnson, Maureen E Williams, Gery R Stafford, William J Boettinger, Kil Won Moon, Daniel Josell, Daniel Wheeler, Thomas P Moffat, W H Huber, Lee J Richter, Clayton S. Yang, Robert D Shull, R A. Fry, Robert D McMichael, William F. Egelhoff Jr., Ursula R Kattner, James A Warren, Jonathan E Guyer, Steven P Mates, Stephen D Ridder, Frank S. Biancaniello, D Basak, Jon C Geist, Kalman D Migler
Abstract: Abstracts relating to research and development in the NIST Materials Science and Engineering Laboratory (MSEL) are presented for a poster session to be presented to the 2001 MSEL Assessment Panel.
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=850052



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series