NIST logo

Publications Portal

You searched on: Topic Area: Nanotechnology

Displaying records 41 to 50 of 203 records.
Resort by: Date / Title

41. Nanomanufacturing Concerns about Measurements made in the SEM II: Specimen Contamination
Topic: Nanotechnology
Published: 11/1/2013
Authors: Michael T Postek, Andras Vladar, Premsagar Purushotham Kavuri
Abstract: The scanning electron microscope (SEM) has gone through a tremendous evolution to become a critical tool for many and diverse scientific and industrial applications. The improvements that have been made have significantly improved the overall SEM per ...

42. Nanomanufacturing concerns about Measurements made in the SEM I: Imaging and its Measurement
Topic: Nanotechnology
Published: 11/1/2013
Authors: Michael T Postek, Andras Vladar
Abstract: The high resolution of the SEM is especially useful for qualitative and quantitative applications for both nanotechnology and nanomanufacturing. But, should users be concerned about the imaging and measurements made with this instrument? Perhaps one ...

43. Temperature-Programmed Electrospray-Differential Mobility Analysis for Characterization of Ligated Nanoparticles in Complex Media
Topic: Nanotechnology
Published: 8/12/2013
Authors: De-Hao D. Tsai, Frank W DelRio, John M Pettibone, Pin Ann Lin, Jiaojie Tan, Michael Russel Zachariah, Vincent A Hackley
Abstract: In this study, an electrospray-differential mobility analyzer (ES-DMA) was operated with an aerosol flow-mode, temperature-programmed approach to enhance its ability to characterize the particle size distributions (PSDs) of nanoscale particles (NPs) ...

44. Through-focus scanning optical microscopy for defect inspection of EUV masks
Topic: Nanotechnology
Published: 8/12/2013
Authors: Ravikiran Attota, Vibhu Jindal
Abstract: The TSOM method provides three-dimensional nanoscale metrology using a conventional optical microscope. Substantial improvements in defect detectability using the TSOM method will be presented. The TSOM method shows potential to (i) detect phase defe ...

45. Multiscale Correlative Microscopy of the Interaction of Au Nanoparticles with Rat Cortex Neural Progenitor Cells
Topic: Nanotechnology
Published: 8/8/2013
Authors: Ann Chiaramonti Chiaramonti Debay, Aric Warner Sanders, Alexandra E Curtin, Kavita M Jeerage, Cindi Schwartz

46. Production and Applications of Cellulose Nanomaterials
Topic: Nanotechnology
Published: 8/1/2013
Authors: Michael T Postek, Robert J Moon, Alan Rudie, Michael Bilodeau
Abstract: ,Production and Applications of Cellulosic NanomaterialsŠ was intended to help organize and highlight the wide range of research being conducted worldwide on the science and technology of cellulose nanomaterials. The format of this book consists of ...

47. Harnessing 3D Scattered Optical Fields for sub-20 nm Defect Detection
Topic: Nanotechnology
Published: 6/24/2013
Authors: Bryan M Barnes, Martin Y Sohn, Francois R. Goasmat, Hui Zhou, Richard M Silver, Abraham Arceo
Abstract: Experimental imaging at =193 nm of sub-resolved defects performed at several focus positions yields a volume of spatial and intensity data. Defects are located in a differential volume, given a reference, with up to 5x increase in sensitivity ...

48. Critical dimension metrology by through-focus scanning optical microscopy beyond the 22 nm node
Topic: Nanotechnology
Published: 6/7/2013
Authors: Ravikiran Attota, Benjamin D. Bunday, Victor Vertanian
Abstract: We present results using simulations and experiments to demonstrate metrological applications of the through-focus scanning optical microscopy (TSOM) down to features at and well below the International Technology Roadmap for Semiconductors' 22  ...

49. Preparation of Nanoscale TiO2 Dispersions in an Environmental Matrix for Eco-Toxicological Assessment
Series: Special Publication (NIST SP)
Report Number: 1200-5r1
Topic: Nanotechnology
Published: 6/3/2013
Authors: Julian S. Taurozzi, Vincent A Hackley, Mark R Wiesner
Abstract: Toxicity and fate assessment are key elements in the evaluation of the environmental, health and safety risks of engineered nanomaterials (ENMs). While significant effort and resources have been devoted to the toxicological evaluation of many ENMs, i ...

50. Sensitivity of gold nano conductors to common contaminations ‹ ab initio results
Topic: Nanotechnology
Published: 5/29/2013
Authors: Shmuel Barzilai, Francesca M Tavazza, Lyle E Levine
Abstract: Gold nanowire chains are considered a good candidate for nanoelectronic devices because they exhibit remarkable structural and electrical properties. A previous study shows that the beryllium terminated BeO (0001) surface may be a useful platform for ...

Search NIST-wide:

(Search abstract and keywords)

Last Name:
First Name:

Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series