NIST logo

Publications Portal

You searched on: Author: tinh nguyen

Displaying records 81 to 90 of 117 records.
Resort by: Date / Title


81. Characterization of Coating System Interphases with Phase Imaging AFM
Published: 2/1/2001
Authors: Tinh Nguyen, Xiaohong Gu, Mark R VanLandingham, M Giraud, R Dutruc-Rosset, R Ryntz, D Nguyen
Abstract: The interphase between a polymer film and a substrate controls the adhesion and durability of a variety of polymeric systems including adhesives, coatings on plastics and metals, and electronic packaging. A polymeric coating system consists of a coat ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860326

82. Effects of Stoichiometry and Epoxy Molecular Mass on Wettability and Interfacial Microstructures of Amine-Cured Epoxies
Published: 2/1/2001
Authors: M Giraud, Tinh Nguyen, Xiaohong Gu, Mark R VanLandingham
Abstract: The effects of stoichiometry and epoxy molecular mass on surface and interfacial microstructures and wettability of amine-cured epoxies have been investigated. Thin (<50 nm) and thick (>150 m) amine-cured epoxy films were prepared by reacting epoxy ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860318

83. Characterization of Chemical Heterogeneity in Polymer Systems Using Hydrolysis and Tapping-Mode Atomic Force Microscopy.
Published: 1/1/2001
Authors: Xiaohong Gu, Tinh Nguyen, D Raghavan, M R VanLandingham
Abstract: Characterization of polymer coatings microstructure is critical to the fundamental understanding of corrosion of coated metals. An approach for mapping chemical heterogeneity of a polymer system using chemical modification and tapping mode atomic for ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=916895

84. Characterization of Polyester Degradation Using Tapping Mode Atomic Force Microscopy; 1. Exposure in Alkaline at Room Temperature
Published: 1/1/2001
Authors: Xiaohong Gu, D T Raghavan, Tinh Nguyen, Mark R VanLandingham, D Yebassa
Abstract: One of the major disadvantages of polyester materials is their sensitivity to hydrolysis. In this paper, tapping mode atomic force microscopy (AFM) has been used to examine the microstructure of polyester films before and after exposure to an alkali ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860313

85. Characterization of Heterogeneous Regions in Polymer Systems Using Tapping Mode and Force Mode Atomic Force Microscopy
Published: 11/1/2000
Authors: R Raghavan, Mark R VanLandingham, Xiaohong Gu, Tinh Nguyen
Abstract: Characterization of polymer coating surfaces is crucial to understanding and predicting the long-term performance of coatings in aggressive environments. The exposed polymer surface and near-surface regions can differ from the bulk polymer film both ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860238

86. Characterization of Polyester Degradation Using Tapping Mode Atomic Force Microscopy
Published: 8/1/2000
Authors: Xiaohong Gu, D T Raghavan, Tinh Nguyen, Mark R VanLandingham
Abstract: Tapping mode AFM was used to examine the microstructure of polyester films before and after exposure to an alkaline solution. Bright-colored microgel domains and dark-colored interstitial regions were observed in phase images of the unexposed sample ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860277

87. Effects of Relative Humidity on Photodegradation of Acrylic Melamine Coatings: A Quantitative Study
Published: 8/1/2000
Authors: Tinh Nguyen, Jonathan W. Martin, E Byrd, N Embree
Abstract: Service life prediction methodology based on correlating short-term performance with outdoor data is not a fundamentally sound approach because the weather never duplicates itself. Experiments having over 200 different combinations of exposure condit ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860279

88. Mapping Chemically Heterogeneous Polymer System Using Chemical Modification and Atomic Force Microscopy
Published: 8/1/2000
Authors: D T Raghavan, Tinh Nguyen, Mark R VanLandingham, Xiaohong Gu
Abstract: Polymer coatings are heterogeneous and often contain nanoscale degradation -susceptible regions. Therefore, mapping and identification of these regions would provide essential information for understanding the mechanism of the degradation of polymeri ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860235

89. Temperature Effects on Fatigue of Polymer Composites
Published: 7/1/2000
Authors: Hai C. Tang, Tinh Nguyen, Tze J Chuang, Joannie W Chin, Hanchang F Wu, J Lesko
Abstract: Fiber-reinforced polymeric composites provide lightweight, high strength, and corrosive resistance to severe environmental exposures. These composites have been extensively used in aerospace and military application over the last three decades an ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=151463

90. Fatigue Model for Fiber-Reinforced Polymeric Composites in Civil Engineering Applications
Published: 5/1/2000
Authors: Hai C. Tang, Tinh Nguyen, Joannie W Chin, J Lesko, Tze J Chuang
Abstract: A fatigue model based on cumulative damage is developed for predicting the fatigue life of fiber-reinforced polymeric composites in offshore applications. This model incorporates applied maximum stress, stress amplitude, loading frequency, residual ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=151356



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series