Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Rippling Instability of Supported Polymer Nanolines

Published

Author(s)

Vijaya R. Tirumala, Christopher M. Stafford, Leonidas E. Ocola, Jack F. Douglas, L. Mahadevan

Abstract

The swelling response of polymer line gratings supported on a rigid substrate has direct implications on their mechanical stability during pattern transfer in nanofabrication. The polymer lines, when swollen in a good solvent, undergo a rippling instability with a well-defined wavelength at the top surface but remain straight and bonded to the substrate at the polymer-substrate interface. These patterns develop due to elastic relaxation of the inhomogeneous compressive strains that arise as a result of the geometric constraints that prevent swelling near the substrate/polymer interface. The ripple wavelength scales linearly with linewidth ( ~ 7w) for gratings that are sufficiently long to overcome finite size effects. The ripple amplitude is independent of grating length but scales with linear swelling degree. These trends were validated for patterned polymer nanolines in the range of (20-250) nm linewidth and a height-to-width aspect-ratio in the range 0.5-5. A simple theory shows that the ripple wavelength and amplitude follow via an analogy to the problem of why the edges of leaves are rippled due to constrained growth.
Citation
ACS Nano
Volume
12
Issue
3

Keywords

wrinkling, rippling, nanostructures, swelling, hydrogels, confinement

Citation

Tirumala, V. , Stafford, C. , Ocola, L. , Douglas, J. and Mahadevan, L. (2012), Rippling Instability of Supported Polymer Nanolines, ACS Nano (Accessed March 19, 2024)
Created February 21, 2012, Updated February 19, 2017