Take a sneak peek at the new NIST.gov and let us know what you think!
(Please note: some content may not be complete on the beta site.).

View the beta site
NIST logo

Publication Citation: A Comparison of Harwell & FWT Alanine Temperature Coefficients for 25 °C to 80 °C

NIST Authors in Bold

Author(s): Marc F. Desrosiers; Anne M. Forney; James M. Puhl;
Title: A Comparison of Harwell & FWT Alanine Temperature Coefficients for 25 °C to 80 °C
Published: May 01, 2012
Abstract: Dosimeters used to monitor industrial irradiation processing commonly experience significant temperature rises that must be considered in the dose analysis stage. The irradiation-temperature coefficient for a dosimetry system is derived from the dosimeter‰s radiation response to the absorbed dose and the irradiation temperature. This temperature coefficient is typically expressed in percent change per degree. The temperature rise in dosimeters irradiated with high-intensity ionizing radiation sources can be appreciable. This is especially true for electron-beam processing in which dosimeter temperatures can approach 80 °C. A recent National Institute of Standards and Technology (NIST) study revealed modest (0.5 % ‹ 1.0 %) deviations from the predicted value at temperatures above 70 °C for absorbed doses of 1 kGy and 20 kGy. However, these data were inconsistent with a concurrent manuscript published by National Physical Laboratory (NPL) researchers that found a significant dose-dependent non-linear alanine response but used dosimeters from a different manufacturer and a different experimental design. The current work was undertaken to reconcile the two studies. Alanine dosimeters from each manufacturer used by NIST and NPL were co-irradiated over a wide range of absorbed dose and irradiation temperature. It was found that though there was a slight variation in the temperature coefficient between the two alanine dosimeter sources both systems were linear with irradiation temperature up to 70 °C and the NPL observations of non-linearity were not reproduced. These data confirmed that there is no fundamental difference in the two commercial alanine dosimeter sources and that temperature corrections could be made on industrial irradiations at the extremes of irradiation temperature and absorbed dose.
Citation: Journal of Research (NIST JRES) - 117.007
Volume: 117
Pages: pp. 143 - 153
Keywords: alanine, dosimeter, dosimetry, gamma ray, irradiation temperature, temperature coefficient
Research Areas: Radiation Physics
DOI: http://dx.doi.org/10.6028/jres.117.007