Take a sneak peek at the new NIST.gov and let us know what you think!
(Please note: some content may not be complete on the beta site.).

View the beta site
NIST logo

Publication Citation: Step Height Metrology for Data Storage Applications

NIST Authors in Bold

Author(s): R Koning; Ronald G. Dixson; Joseph Fu; Thomas B. Renegar; Theodore V. Vorburger; V W. Tsai; Michael T. Postek;
Title: Step Height Metrology for Data Storage Applications
Published: November 01, 1999
Abstract: The measurements of bump heights and pit depth on compact discs (CD) with atomic force microscopes (AFMs) are quite different from the measurement of step heights on step height calibration standards.  Both the bumps and the pits show much larger transition regimes and more structural irregularities.  The irregularities disqualify the effective use of profile based algorithms, which minimize the influence of any remaining motion deviations of the scan apparatus, to determine the height.  Therefore a histogram height algorithm has to be used.  The results of the bump height and pit depth measurements varied about 20 nm over the different sample regions.  The remaining approximately 30 nm difference between the average of the bump height and pit depth is believed to result from the sample preparation procedure.  By itself, the large sample variation observed will result in rather in rather large measurement uncertainties for the measurement of the average height and depth of these features, if the averaging does not include a large amount of data taken at many different sample positions.
Conference: Recent Advances in Metrology, Characterization, and Standards for Optical Digital Data Disks
Proceedings: Proceedings of SPIE
Volume: 3806
Location: Denver, CO
Dates: July 21, 1999
Keywords: atomic force microscopy,compact disc,data storage,data versatile disc,metrology,step height
Research Areas: Metrology, Manufacturing