U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Information Technology Laboratory

Software and Systems Division

Ram Sriram's List of Publications

Share

Dr. Ram D. Sriram -- PUBLICATIONS

Books

  1. Sriram, R. D., et al., Distributed and Integrative Collaborative Engineering Design, Sarven Publishers, 2002.
  2. Sriram, R. D., Intelligent Systems for Engineering: A Knowledge-based Approach, Springer Verlag, July 1997.
  3. Sriram, D., Knowledge-Based Approaches for Structural Design,CM Publications, October 1987.  

Edited Books

  1. Subrahmanian, E., Sriram, R., Herder, P., Christiaans, H., and Schneider, R. (Editors), The Role of Empirical Studies in Understanding and Supporting Engineering Design, Delft University Press, 2004.
  2. Pratt, M., Sriram, R. D., Wozny, M., (Editors), Product Modeling for Computer Integrated Design and Manufacture, Chapman & Hall, 1997.
  3. Tong, C. and Sriram, D. (Editors), Artificial Intelligence Approaches to Engineer­ing Design: Representation, Models of Routine Design, Academic Press, 1992.
  4. Tong, C. and Sriram, D. (Editors), Artificial Intelligence Approaches to Engineer­ing Design: Models of Innovative Design, Qualitative Reasoning, Reasoning about Geometry, Academic Press, 1992.
  5. Tong, C. and Sriram, D. (Editors), Artificial Intelligence Approaches to Engineer­ing Design: Integrated Systems, Commercial Tools, Academic Press, 1992.
  6. Sriram, D., Logcher, R., and Fukuda, S. (Editors), Computer-Aided Cooperative Product Development, Springer Verlag, 1991.
  7. Sriram, D. and Adey, R. (Editors), Artificial Intelligence in Engineering: Tools and Techniques, CML Publications, August 1987 (Proceedings of the 2nd International Conference on AI in Engineering).
  8. Sriram, D. and Adey, R.(Editors), Knowledge-Based Expert Systems in Engi­neering: Classification, Education and Control, CML Publications, August 1987 (Proceedings of the 2nd International Conference on AI in Engineering).
  9. Sriram, D. and Adey, R. (Editors), Knowledge-Based Expert Systems in Engineer­ing: Planning and Design, CML Publications, August 1987 (Proceedings of the 2nd International Conference on AI in Engineering).
  10. Sriram, D. and Adey, R. (Editors), Applications of Artificial Intelligence in Engi­neering Vol. I, Springer Verlag, UK, April 1986.
  11. Sriram, D. and Adey, R. (Editors), Applications of Artificial Intelligence in Engi­neering Vol. II, Springer Verlag, UK, April 1986

Videos

  1. Knowledge-based Expert Systems for Engineering: Overview and Project Manage-ment, Center for Advanced Engineering Studies, M.I.T., Tape No: 31-0611, De-cember 1987. [2 hrs]
  2. Object-Oriented Systems: Technology and Applications, Center for Advanced En-gineering Studies, M.I.T., March 1993. [5 hrs]
  3. Smart Networked Systems and Societies: Research Challenges, Leadership Lecture Series, IIT Madras, Chennai, India, December 2014.

    [Available at http://www.youtube.com/watch?v=A9bY3iTiOwI, see also https://www.youtube.com/watch?v=ywjekHO1pAM, and https://vimeo.com/118680431]

Journal/Magazine Papers

  1. Cardone, A., Bornstein, A., Pant, H., Brady, M., Sriram, R., and Hassan, S., Detection and Characterization of Nonspecific, Sparsely Populated Binding Modes in the Early Stages of Complexation, Accepted for publication in the Journal of Computational Chemistry, 2015.

  2. Newhaus, F., Vizedom, A., Baclawski, K., Bennertt, M., Dean, M., Denny, M., Gruninger, M., Hashemi, A., Longstreth, T., Obrst, L., Ray, S., Sriram, R., Schneider, T., Vegetti, M., West, M., Yim, P., Towards Onotology Evaluation Across Life Cycle: The Ontology Summit 2013, Applied Ontology 8(3); 179-194, 2013.

  3. Feng, S.C., Kramer, T., Sriram, R.D., Lee, H., Joung, C.B., and Ghodous, P., Disassembly Process Information Model for Remanufacturing, Journal of Computing and Information Science in Engineering, Vol. 13, Sept. 2013.

  4. Mani, M., Johansson, B., Lyons, K.W., Sriram, R.D., and Ameta, G., Simulation and Analysis or Sustainable Product Development, The International Journal of Life Cycle Assessment, Online Publication on January, 09, 2013.

  5. Brady, K., Sriram, R.D., Lide, B.J., and Roberts, K., Testing the nation's Healthcare Information Infrastructure: NIST Perspective, IEEE Computer, November 2012.

  6. Schneider, Todd, Ali Hashemi, Mike Bennett, Mary Brady, Cory Casanave, Henson Graves, Michael Gruninger, Nicola Guarino, Anatoly Levenchuk, Ernie Lucier, Leo Obrst, Steve Ray, Ram D. Sriram, Amanda Vizedom, Matthew West, Trish Whetzel, Peter Yim. 2012 Ontology for Big Systems: The Ontology Summit 2012 Communiqué. Applied Ontology, 7(3):357-371, 2012.

  7. Barbau, R., Krima, S., Fiorentini, X.,  Sudarsan, R.,  Narayanan, A., Foufou, S.,  Sriram, R.D., OntoSTEP: Enriching Product Model Data using Ontologies, Journal of CAD, June 2012.

  8. Ramaiah, M., Subrahamanian, E., Sriram, R.D., and Lide, B.J., Workflow and Electronic Health Records in Small Medical Practices, AHIMA's Online Research Journal, Perspectives in Health Information Management, 2012.

  9. Chandrasegaran, S., Ramani,K., Sriram, R.D., Horvath, I., Bernard, A., Harik, R., and Gao, W., The Evolution and Challenges of Knowledge Representation in Product Design Systems, Journal of CAD (Accepted for Publication).

  10. Lee, J.H., Fenves, S.J., Bock, C., Suh, H-W., Sudarsan, R., Fiorentini, X., Sriram, R., A Semantic Product Modeling Framework and its Application for Behavior Evaluation, IEEE Transactions on Automation Science and Engineering January 2012.

  11. Weissman, A., Petrov, M., Gupta, S.K., Fiorentini, X., Sudarsan, R., and Sriram, R., A Computational Framework for Authoring and Searching Product Design Specifications, Advanced Engineering Informatics, Vol. 25, No. 3, pages 516-534, August 2011 & January 2012.

  12. Uschold, Michael; John Bateman; Mills Davis; John Sowa; Mike Bennett; Rex Brooks; Alden Dima; Michael Gruninger; Nicola Guarino; Ernie Lucier; Leo Obrst; Steve Ray; Todd Schneider; Ram Sriram; Matthew West; Peter Yim. 2011. Ontology Summit 2011: Making the Case for Ontology. Applied Ontology, Volume 6, Number 4 (2011), pp. 377-385. IOS Press.

  13. Ameta, G., Sudarsan, R., Fiorentini, X., Mani, M., Fenves, S.J., Lyons, K.W., and Sriram, R.D., Extending the Notion of Quality from Physical Metrology to Information and Sustainability, Journal of Intelligent Manufacturing, 22(5), pages 737-750, October 2011.

  14. Cardone, A., Hassan, S., Albers, W., Sriram, R., and Pant, H., Structural and Dynamic Determinants of Ligand Binding and Regulation of Cyclin-dependent Kinase 5 by Pathological activator p25 and Inhibitory Peptide CIP, Journal of Molecular Biology, 401:478-492, August 2010.

  15. Cheng, J., Law, K, Bjornsson, H., Jones, A., and Sriram, R.D., Modeling and Monitoring of Construction Supply Chains, Advanced Engineering Informatics, pp. 435-455, 2010.

  16. Ameta, G., Mani, M., Sudarsan, R., Feng, S.C., Sriram, R.D., Lyons, K., Carbon Weight Analysis for Machining Operation and Allocation for Redesign, International Journal of Sustainable Engineering, Volume 2, Issue 4, pp 241-251, December 2009.

  17. Cardone, A., Albers, W., Sriram, R., and Pant, H., Evaluation of the Interaction of Cyclin-dependent Kinase 5 with Activator P25 and with P25-derived Inhibitor, Journal of Computational Biology, 17:707-721, May 2010.

  18. Sarigecili, Mehmet, Uptal, Roy, Sudarsan, Rachuri, Sriram, Ram D., Development of Functionality-Based Conformance Classes for ISO 10303: Conformance Classes for Tolerancing Functionality, Computer-Aided Design & Applications, 6(1-4), 2009.

  19. Fiorentini, X., Sudarsan, R., Suh, H, Lee, J.H., Sriram, R.D., An Analysis of Description Logic Augmented with Domain Rules for the Development of Product Models, Journal of Computing and Information Science in Engineering, Volume 10, Issue 2, 2010.

  20. Szczypinski, P., Sriram, R.D., Sriram, P.V.J., and Reddy, D.N., A Model of Deformable Rings for Interpretation of Wireless Capsule Endoscopic Videos, Medical Image Analysis, Pages 312-324, Volume 13, 2009.

  21. Sriram, R.D., and Fenves, S.J., A Life Saving Role (The Role of Engineers in Health Care Information Systems), Industrial Engineer, pp. 34-39, Feb. 2009.

  22. Gupta, S.K., Deshmukh, A., Banerjee, A., Sriram, R.D., Content-based Assembly Search: A Step Towards Reuse, Journal of CAD, Vol. 40, No. 2, pp 244-261, Feb. 2008.

  23. Clarke, L., Sriram, R.D., and Schilling, L., Imaging as a Biomarker: Standards for Change Measurements in Therapy: Workshop Summary, American Radiology, Volume 5, pages 501-530, 2008.

  24. Zha, X.F., Sriram, R.D., Fernandez, M.G., and Mistree, F., Knowledge-Intensive Collaborative Decision Support for Design Processes: A Hybrid Decision Model and Multi-agent Framework, Computers in Industry (accepted for publication).

  25. Kim, S., Shin, Soo-yong, Lee, In-Hee, Kim, S-J., Sriram, R., and Zhang, B-T., PIE: An Online Prediction System for Protein-Protein Interactions from Text, Nucleic Acid Research, pages 1-5, 2008.

  26. Biswas, A., Fenves, S.J., Shapiro, V., and Sriram, R., Representation of Heterogeneous Material Properties in the Core Product Model, Engineering with Computers, Vol. 24, Number 1, pp 43-58, January 2008.

  27. Rachuri, S., Subrahmanian, E., Bouras, A., Fenves, S.J., and Sriram, R.D., Information Sharing and Exchange in the Context of Product Lifecycle Management, Journal of CAD, Vol. 40, No. 7, pp 789-800, July 2008.

  28. Kim, J., Pratt, M., Iyer, R., and Sriram, R.D., Standardized Data Exchange of CAD Models with Design Intent, Journal of CAD, Vol. 40, No. 7, pp 760-777, July 2008.

  29. Fenves, S. J., Foufou, S., Bock, C., and Sriram, R.D., CPM2: A Core Model for Product Data, Technical Brief, ASME Transactions of Journal of Computing and Information Science in Engineering, Volume 8, Number 1, 2008.

  30. Dartigues, C., Ghodous, P., Gruninger, M., Pallez, D., and Sriram, R., CAD/CAPP Integration using Feature Ontology, Concurrent Engineering: Research and Applications, Volume 15, Number 2, June 2007.

  31. Sriram, R.D., Szykman, S., and Durham, D., Guest Editorial, Special Issue on Collaborative Engineering, Transactions of the ASME Journal of Computing and Information Science in Engineering, 6(2), 93-95, June 2006.

  32. Zha, X.F., Foufou, S., Sudarsan, R., Sriram, R. D., Analysis and Evaluation of STEP-based Electromechanical Assemblies, ASME Journal of Computing and Information Science in Engineering, 6(3), 276-287, September, 2006.

  33. Wang, H., Pramanik, N., Roy, U., Sudarsan, R., Sriram, R.D., Lyons, K.L., A Scheme for Mapping Tolerance Specifications to Generalized Deviation Space for Use in Tolerance Synthesis, IEEE Transactions on Automation Science and Engineering, 3(1), 81-91, January 2006.

  34. Sriram, R.D. (Invited Editorial), Artificial Intelligence In Engineering: Personal Reflections, Advanced Engineering Informatics, Vol. 20, pages 3-5, 2006.

  35. Rachuri, S., Han, Y., Foufou, S., Feng, S.C., Roy, U., Wang, F., Sriram, R.D., and Lyons., K.W., A Model for Capturing Product Assembly Information, Transactions of the ASME Journal of Computing and Information Science in Engineering, 6(1), 11-21, 2006.

  36. Rachuri, Sudarsan, Baysal, M.M., Roy, U., FouFou, Sebti, Bock, C, Fenves, Steven, Subrahmanian, Eswaran, Lyons, Kevin, Sriram, R.D., Information Models for Product Representation: Core and Assembly Models, International Journal of Product Development, Vol. 1., No. 1, pages 207 – 235, 2005.

  37. Fenves, S., Sriram, R. D., Subrahmanian, E., Rachuri, S., Product Information Exchange: Practices and Standards, Transactions of the ASME Journal of Computing and Information Science in Engineering, 5(3), 238-246, September 2005.

  38. Pramanik, N., Roy, U., Wang, H., Lyons, K., Sriram, R.D., Sudarsan, R., A Generic Deviation-based Approach for Synthesis of Tolerances, To appear in IEEE Transactions on Automation Science and Engineering (T-ASE), 2(4), 358-368, October 2005.

  39. Subrahmanian, E., Rachuri, Sudarsan, Fenves, S., and Sriram, R.D., Product Lifecycle Management Support: A Challenge in Supporting Product Design and Manufacturing in a Networked Economy, International Journal of Product Lifecycle Management, Volume 1, Number 1, 4-25, 2005.

  40. Liu, D.L., Peng J., Law, K.H., Wiederhold, G., Sriram, R.D., Composition of Engineering Web Services with Distributed Data-flows and Computations, Advanced Engineering Informatics, 19, pp 25—42, 2005.

  41. Zha, X.F., Foufou, S., Sudarsan, R., and Sriram, R.D., Analysis and Evaluation for STEP-based Electro-Mechanical Assemblies, Transactions of ASME, Journal of Computing and Information Science Engineering, 2005 (accepted).

  42. Ravichandran, V. and Sriram, R.D., Toward Data Standards for Proteomics, Nature Biotechnology, Volume 23, Number 3, pages 373-376, March 2005.

  43. Szykman, S. and Sriram, R.D., Design and Implementation of the Web-enabled Design Repository, Accepted for publication in the ACM Transactions on Internet Computing.

  44. Fenves, S.J., Sudarsan, R., Sriram, R.D., and Wang, F., A Product Information Modeling Framework for Product Life Cycle Management, Computer-Aided Design, Volume 37, Issue 13, November 2005, Pages 1399-1411

  45. Patil, L., Dutta, D., and Sriram, R.D., Ontology-based Exchange of Product Semantics, IEEE Journal of Automation Science and Engineering, Col. 2, Number 3, 213-225, July 2005.

  46. Szczypinski, P.M., Sriram, P.V.J., Sriram, R.D., and Reddy, D.N., Przetwarzanie i wspomaganie interpretacji danych z endoskopu bezprzewodowego za pomocą modelu deformowalnych pierścieni, Zeszyty Naukowe Elektronika, Instytut Elektroniki PŁ, Nr 10, 2005, pp. 129-147 (in Polish)  

  47. Zha, X., Sriram, R.D., Lu., Wen, Evaluation and Selection in Product Design for Mass Customization: A Knowledge Decision Support Approach, International Journal of Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), Cambridge University Press, (2004)

  48. Ravichandran, V., Lubell, J., Vasquez, G.B., Lemkin, P., Sriram, R.D., Gilliland, G.L., Ongoing Development of Two-Dimensional Polyacrylamide Gel Electrophoresis Data Standards, Electrophoresis, 25, 297-308, 2004.

  49. Ravichandran, V., Sriram, R.D., Gilliland, G.L., MitoMorphy: An Alignment and Annotation Tool for Human Mitochondrial DNA Polymorphisms, Mitochondrian, Vol. 4, 309-312, 2004.

  50. Ravichandran, V., Vasquez, G.B., Srivastava, S., Verma, M., Petricoln, E., Lubell, J., Sriram, R.D., Barker, P.E., and Gilliland, G., Data Standards for Proteomics: Mitochondrial Two-Dimensional Polyacrylamide Gel Electrophoresis Data as a Model System, Mitochondrian, Volume 3, 327-336, 2004.

  51. Cheng, J., M. Gruninger, R. D. Sriram, and K. H. Law, Process Specification Language For Project Scheduling Information Exchange, International Journal of IT in Architecture, Engineering and Construction, 1(4): 307-328, 2003.

  52. Liu, D., Cheng, J., Law, K., Wiederhold, G., and Sriram, R.D., An Engineering InformationService Infrastructure for Ubiquitous Computing, ASCE Journal of Computers in Civil Engineering, 17(4), 219—229, 2003.

  53. Gutpa, S. K., Chen, Y., Feng, S., and Sriram, R., A System for Generating Process and Material Selection Advice During Embodiment Design of Mechanical Compo­nents, Accepted for Publication in SME Journal of Manufacturing Systems, 22 (1), 28-45, 2003.

  54. Pratt, M.J., Bhatt. A.D., Dutta, D., Lyons, K.W., Patil, L., and Sriram, R. D., Proposed ISO 10303 (STEP) Standard for Data Transfer in Rapid Prototyping and Layered Manufacturing, Journal of Computer-Aided Design, Elsevier Science Ltd., 34, 1111-1121, 2002.

  55. Patil, L., Dutta, D., Pratt, M.J., Bhatt. A.D., Lyons, K.W., and Sriram, R. D., An ISO 10303 (STEP) based Information Protocol to Represent Heterogeneous Objects for Layered Manufacturing, Rapid Prototyping Journal, 8:3, 134-146, 2002.

  56. Ilinkin, I., Janardan, R., Majhi, J., Schwerdt. J., Smid, M., and Sriram, R., A Decomposition-based Approach to Layered Manufacturing, Journal of Computation Geometry: Theory and Applications, Elsevier Science B.V., 23, 117-151, 2002.

  57. Szykman, S., Sriram, R.D., and Regli, W., The Role of Knowledge in Next Genera­tion Product Development Systems, Journal of Computing and Information Science in Engineering, Volume 1, Number 1, 3-11, 2001.

  58. Roy, U., Pramanik, N., Sudarsan, R., Sriram, R.D., and Lyons, K.W., Function-to-Form Mapping: Model, Representation and Applications in Design Synthesis, Journal of CAD, Volume 33, pages 699-719, 2001.

  59. Szykman, S., Racz, J. W., Bochenek, C., and Sriram, R. D., A Web-based System for Design Artifact Modeling, Design Studies, Vol. 21, No. 2, pp 145-165, 2000.  

  60. Nidamarthi, S., Allen, R.H., and Sriram, R.D., Observations from Supplementing the Traditional Design Process via Internet-based Collaboration Tools, Journal of Computer Integrated Manufacturing, Vol. 14, No. 1, pp. 95-105, 2001.

  61. Allen, R. H. and Sriram, D., The Role of Standards in Innovation,Special Issue on "Innovation: The Key to Progress in Technology and Society," Journal Tech­nological Forecasting and Social Change, 2000.

  62. Szykman, S., C. Bochenek, J. W. Racz, J. Senfaute, and R. D. Sriram, Design Repositories: Next-Generation Engineering Design Databases, IEEE Intelligent Systems, Vol. 15, No. 3, 48-55, 2000.

  63. Narahari, Y., Sudarsan, R., Lyons, K., Duffey, M., and Sriram, R. D., Design for Tolerance of Electro-mechanical Assemblies: An Integrated Approach, IEEE Trans. Robotics & Automation, 15(6), 1062-1079, December 1999.

  64. Gorti, S., Gupta, A., Kim, G.J., Sriram, R.D., Wong, A., An Object-Oriented Representation for Product and Design Processes, Journal of CAD, pages 489–501, Vol. 30, No. 7, 1998.

  65. Sriram, R. D., Information Technology for Engineering Design, Invited Editorial, ASCE Journal of Computing in Civil Engineering, July 1998.

  66. Garcia, F. and Sriram, Ram, D., Developing Knowledge Sources to Identify and Evaluate Tradeoffs Among Alternate Designs in a Cooperative Engineering Frame­work, Journal of Concurrent Engineering Research and Applications, pages 279– 292, Vol 5, No. 3, September 1997.

  67. Gorti, S., and Sriram, Ram, D., From Symbol to Form: A Framework for Concep­tual Design, Journal of CAD, Vol. 28, No. 11, 1996.

  68. Gorti, S., Humar, S., Sriram, Ram, D., Talukdar, S., and Murthy, S., Solving Constraint Satisfaction Problems using ATeams, AI-EDAM, Vol. 10, No. 1, 1996.

  69. Peña-Mora, F., Hussein, K., and Sriram, Ram, D., CAIRO: A System for Facil­itating Communication in a Distributed Collaborative Engineering Environment, Computers in Industry, 1996.

  70. Sriram, Ram D., Wong, A., and Li, H., GNOMES: An Object-Oriented Non-Manifold Geometric Engine, Journal of CAD, November 1995.

  71. Peña-Mora, F., Sriram, Ram D., and Logcher, R., Conflict Mitigation System for Collaborative Engineering, AIEDAM, Vol. 9, Number 2, 1995.

  72. Peña-Mora, F., Sriram, Ram D., and Logcher, R., Design Rationale for Computer Supported Conflict Mitigation, ASCE Journal of Computing in Civil Engineering, Vol. 9, Number 1, January 1995 [Won the best paper award].

  73. Vemula, M., Sriram, D., and Gupta, A., Incremental Compilation in the Persistent C++ Language E, Journal of Object Oriented Programming, July 1995.

  74. Gorti, S. and Sriram, D., CONGEN: An Integrated Approach to Conceptual Design, Revue international de CfAO et d'infograhie (International Journal for CAD/CAE), Vol. 8, No. 2, pages 135–150, 1993.

  75. Wong, A. and Sriram, D., SHARED: An Information Model for Cooperative Prod­uct Development, Research in Engineering Design, Fall 1993.

  76. Sriram, D. and Logcher, R., The MIT DICE Project, IEEE Computer, Special Issue on Concurrent Engineering, pp. 64-65, January 1993.

  77. Agbayani, N., Jayachandran, P., and Sriram, D., Novel Design Algorithms for K Factor Calculation and Selection of a Trail Beam-Column Section, ASCE Journal of Structural Engineering, 1993.

  78. Sriram, D., Ahmed, S., and Logcher, R., ATransaction Management Framework for Collaborative Engineering, Engineering With Computers, Fall 1992.

  79. Agbayani, N., Sriram, D., and Jayachandran, P., An Object Oriented Framework for Steel Design: Implementation Issues, Computing Systems in Engineering, 1992.

  80. Ahmed, S., Wong, A., Sriram, D., and Logcher, R., Object-Oriented Database Management Systems for Engineering: A Comparison, Journal of Object Oriented Programming, June 1992.

  81. Ahmed, S., Sriram, D., and Logcher, R., Transaction Management Issues in Col­laborative Engineering, ASCE Journal of Computing in Civil Engineering, January, 1992.

  82. Cherneff, J., Logcher, R., and Sriram, D., Integrating CAD with Construction Schedule Generation, ASCE Journal of Computing in Civil Engineering, January 1991.

  83. Sriram, D., Logcher, R., Wong, A., and Ahmed, S., Computer-Aided Cooperative Product Development: A Case Study, Journal of Systems Automation: Research & Applications, Vol. 1, No. 1, pages 91 -114, 1991.

  84. Ganguly, J., Sriram, D., and Kausel, E., An Integrated Knowledge-Based Frame­work for Deriving (Seismic) Behavior from Structural Descriptions, ASCE Journal of Computing in Civil Engineering, October 1991.

  85. Sriram, D. et al., Knowledge-Based Expert Systems in Engineering Design: Re­search at M.I.T., Fall 1989, AI Magazine (Translated into Japanese and published in the April issue of Nikkei-AI).

  86. Logcher, R., Sriram, D., and Cherneff J., Knowledge-Based Construction Schedul­ing, Architectural & Engineering Systems, February, 1989.

  87. Navinchandra, D., Sriram, D., and Logcher, R. GHOST: A Project Network Gen­erator, ASCE Journal of Computing, July 1988.

  88. Sriram, D., ALL-RISE: A Case Study in Constraint-Based Design, International Journal for AI in Engineering, July 1987 (Special Issue on Engineering Design, Guest Editor: C. Tong).

  89. Sriram, D., DESTINY: A Model for Integrated Structural Design,International Journal for AI in Engineering, October 1986 (Special Issue on Blackboard Archi­tectures, Guest Editors: M. Bushnell and P. Haren).

  90. Sriram, D. and Rychener, M., Knowledge-Based Expert Systems for Engineering, Guest Editorial, IEEE Software, March 1986 [Invited].

  91. Fenves, S. J., Maher, M., Sriram, D., Knowledge-Based Expert Systems in Civil Engineering, IABSE Journal, J-29/85, pp. 63-72, November 1985 (similar paper appeared in ASCE Civil Engineering under Fenves, S. J., Maher, M. L. and Sriram, D., Expert Systems: CE Potential, ASCE Civil Engineering, October 1984.)

  92. Bañares, R., Sriram, D., et al., Knowledge-Based Expert Systems for Chemical Engineering, Chemical Engineering Progress, September 1985.

  93. Sriram, D., Maher, M. and Fenves, S., Knowledge-based Expert Systems in Struc­tural Design, Computers and Structures, January 1985.

  94. Maher, M. L., Sriram, D. and Fenves, S. J., Tools and Techniques for Knowledge Based Expert Systems for Engineering Design, Advances in Engineering Software, October, 1984.

Papers in Edited Volumes

  1. Law, K.H., Cheng, J.C., Fruchter, R., and Sriram, R.D., Engineering Applications in the Cloud, in Encyclopedia of Cloud Computing, Murugesan, S., Bojanova, I (editors), ISSIP
  2. Lyons, K., Sriram, R.D., Chordia, L., and Weissman, A., Toward Energy Efficient Manufacturing Enterprises, Chapter 31, Energy and Power Generation Handbook, Edited by Rao, K.R., ASME Press, 2011.
  3. Zha, X. and Sriram, R.D., Knowledge-Intensive Collaborative Decision Support for Design Process, Intelligent Decision-Making Support Systems (I-DMSS): Foundations, Applications and Challenges, Gupta, J., Forgionne, G., and Mora, M. (ed.), Chapter 16, Springer-Verlag, London, May 2006.
  4. Ravichandran, V., Sriram, R.D., Gilliland, G., and Srivastava, S., Data Standards in Proteomics: Promises and Challenges, In Infomatics in Proteomics, Srivastava, S. (Editor), CRC Press, 2004.
  5. Zha, X. and Sriram, R.D., Platform-based Product Design and Development: A Knowledge Support Strategy and Implementation, Intelligent Knowledge-based Systems: Business and Technology in New Millennium, Cornelius T. Leondes (ed), Vol. I, Chapter 1, Kluwer Academic Publishers, USA, 2004 (invited)
  6. Zha, X.F., Sriram, R.D., Lu, W.F., and Wang, F., Evaluation and Selection in Product Design for Mass Customization, Intelligent Knowledge-based Systems: Business and Technology in New Millennium, Cornelius T. Leondes (ed), Vol.V, Chapter 6, Kluwer Academic Publishers, USA, 2004 (invited)
  7. Sriram, R., Navinchandra, D., Allen, R.H., Environmental Issues in Collabora­tive Design, Mechanical Life Cycle Handbook: Good Environmental Design and Manufacturing, Hundal, M. (editor), Mercel Dekker , Inc, 2000.
  8. Szykman, S., Sriram, R. D., Bochenek,C., and Racz, J. W., The NIST Design Repository Project, Advances in Soft Computing -Engineering Design and Manu­facturing, Roy, R., T. Furuhashi and P. K. Chawdhry (Editors), Springer-Verlag, London, pp 5-19, 1999.
  9. Feniosky Peña, Sriram, D., and Logcher, R., SHARED-DRIMS: SHARED De­sign Recommendation-Intent Management System, In Second IEEE Workshop on Enabling Technologies Infrastructure for Collaborative Enterprises (WET ICE), Reddy, Y. V. and Jagannathan, V. (Editors), pages 213–221, IEEE Press, 1993.
  10. Sriram, D., Cheong, K., Lalith Kumar., Engineering Cycle: A Case Study and Implications for CAE,To appear in Knowledge-Aided Design, Edited by Marc Green, Published by Academic Press, 1992.
  11. Sriram, D., AI in Engineering: An Overview, Encyclopedia of AI, Edited by Shapiro, S., 1991.
  12. Sriram, D., Logcher, R., Wong, A., and Ahmed, S., An Object-Oriented Environ­ment for Computer-Aided Collaborative Engineering Design,In Computer-Aided Cooperative Product Development, Edited by Sriram, D., Logcher, R., and Fukuda, S., Springer Verlag Inc., 1991.
  13. Ganguly, J., Kausel, E., and Sriram, D., QSEIS: A Knowledge-Based System for Deriving Qualitative Seismic Behavior of Structural Systems from Structural De-scriptions,In Artificial Intelligence: Applications in Computational Engineering, Edited by M. Kleiber, Published by Ellis Horwood, 1990.
  14. Tong, C. and Sriram, D., Introduction, Artificial Intelligence in Engineering Design, Edited by Tong, C. and Sriram, D., Academic Press, 1992.
  15. Sriram, D., Logcher, R., Groleau, and Cherneff, J., DICE: An Object Oriented Programming Environment for Communication, Coordination and Control in Com­puter Aided Engineering, Artificial Intelligence in Engineering Design, Edited by Tong, C. and Sriram, D., Academic Press, 1992.
  16. B¨uttner, K., Sriram, D., and Freiling, M., An Object Oriented Blackboard Archi­tecture for Model Based Diagnostic Reasoning,In Blackboard Architectures and Applications, Edited by Jagannathan, V., Dodhiwala, R., and Baum, L., Academic Press, 1989.
  17. Sriram, D., Teaching Expert Systems Course at M.I.T., ASCE Monograph on Ex­pert Systems in Education, Edited by Mohan, S. and Maher, M.L., 1989.
  18. Sriram, D., Knowledge-based Expert Systems in Civil Engineering: An Annotated Bibliography, ASCE Monograph on Expert Systems in Education, Edited by Mo-han, S. and Maher, M.L., 1989.
  19. Pandit, N. and Sriram, D., Micro-Computer Based Expert Systems in Engineering: An Example,in Microcomputers-based Expert Systems, Edited by Gupta, A. and Prasad, B., IEEE Press, 1988 [Reprint of a paper that appeared in IEEE Expert Systems in Government Conference].
  20. Rehak, D., Howard, C., and Sriram, D., An Integrated Knowledge Based Structural Engineering Environment, In Knowledge Engineering in Computer-Aided Design, Edited by Gero, J., North-Holland, 1985.

Conference/Workshop Papers

  1. Yu, L., Lei, Y., Kacker, R., Kuhn, R., Sriram, R.D., Brady, K., A General Conformance Testing Framework for IEEE 11073 PHD's Communication Model, PETRA'13 (Proceedings of the 6th International Conference on Pervasive Technologies Related to Assistive Environments), 2013.

  2. Weissman, A., Gupta, S.K., Anantharayanan, A., Sriram, R. D., A Systematic Methodology for Accurate Design-Stage Estimation of Energy Consumption for Injectioin Molded Parts, Proceedings of the ASME 2010 IDETC/CIE Conference, August 2010.

  3. Lee, J., Fenves, S.J., Bock, C., Suh, H., Sudarsan, R., Fiorentini, X., and Sriram, R. D., Product Modeling Framework and Language for Behavior Evaluation (Extended Abstract), Procedings of the 6th Annual IEEE Conference on Automation Science and Engineering, August 2010.

  4. Sriram, R.D., Jones, A.T., Mani, M., Sudarsan, R., and Subrahmanian, E., Network-Centric Product Realization and the Role of Standards, International Conference on Frontiers of Interface between Statistics and Sciences, December 30, 2009 -January 2, 2010, Hyderabad, India.

  5. Fiorentini, X., Sudarsan, R., Ray, S., and Sriram, R.D., Towards a Method for Harmonizing Information Standards (Extended Abstract), Proceedings of the 5th Annual IEEE Conference on Automation Science and Engineering, 2009.

  6. Sarigecili, M., Roy, U., Sudarsan, R., and Sriram, R.D., Development of Functionality-Based Conformance Classes for ISO 10303: Conformance Classes for Tolerancing Functionality, Proceedings of CAD09 Conference, July 2009.

  7. Krima, S., Barnau, R., Fiorentini, X., Sudarsan, R., Foufou, S., Sriram, R., OntoSTEP: OWL-DL Ontology for STEP, PLM09, Bath, UK, July 2009.

  8. Cheng, J., Law, K., Jones, A., and Sriram, D., Service-Oriented and Orchestrated Framework for Supply Chain Integration, ASME IDETC/CIE International Conference, August 2009.

  9. Gupta, SK., Weissman, A., Fiorentine, X., Sudarsan, R., and Sriram, R., Formal Representation of Product Design Specifications for Validating Product Design, ASME IDETC/CIE International Conference, August 2009.

  10. Johansson, J., Kacker, R., Kessel, R., Sriram, R., Mclean, C., Utilizing Cominatorial Testing on Discrete Event Simulation Models for Sustainable Manufacturing, ASME IDETC/CIE International Conference, August 2009.

  11. Mani, M., Lyons, K., Sudarsan, R., Feng, S.C., Sriram, R.D., and Ameta, G., Introducing Sustainability Early into Manufacturing Process Planning, Proceedings of the 14th International Conference on Manufacturing Science and Engineering, ASME, October 7-10 2008, Evanston, IL., USA.

  12. Shin, S-Y., Kim, S., Eom, J-H., Zhang, B-T., Sriram, R.D., Identifying Protein-Protein Interaction Sentences Using Boosting and Kernel Methods, Second BioBreAtivE Challenge Workshop - Critical Assessment of Information Extraction in Molecular Biology, April 23-25, 2007, Madrid, Spain, 2007.

  13. Deshmukh, A., Karnik, M.V., Gupta, S.K., Sriram, R.D., A System for Performing Content-Based Searches on a Database of Mechanical Assemblies, Proceedings of IMECE2005, 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Orlando, FL, 2005.

  14. Xu, C., Gupta, S.K., Yao, Z., Gruninger, M., Sriram, R., Computer-Aided Conceptual Design of Mechatronic Devices with Multiple Interaction-States, Proceedings of the 2005 ASME Design Engineering Technical Conference, September 2005.

  15. FouFou, Sebti, Fenves, Steven, Bock, C, Rachuri, Sudarsan , Sriram, R.D. , A Core Product Model for PLM with an Illustrative XML Implementation, Proceedings of the International Conference on PLM, Lyons, France, July 2005.

  16. Zha, X., Fenves, S.J., and Sriram, R.D., A Feature-based Approach to Embedded System Hardware and Software Co-Design, Proceedings of the 2005 ASME DTEC Conference, Paper No.: DETC2005-85582, 2005.

  17. Zha, X.F. and Sriram, R.D., A Distributed Modeling Framework for Collaborative Embedded System Design, Proceedings of the 2005 ASME DTEC Conference, Paper No.: DETC2005-85608, 2005.

  18. Zha, X.F., Sriram, R.D., and Gupta, S.K., Information and Knowledge Modeling for Computer Supported Micro-Electro-Mechanical-Systems Design and Development, Proceedings of the 2005 ASME DTEC Conference, Paper No.: DETC2005-85607, 2005.

  19. Xu, C., Gupta, S.K., Yao, Z., Gruninger, M., Sriram, R., Computer-Aided Conceptual Design of Mechatronic Devices with Multiple Interaction-States, Proceedings of the 2005 ASME Design Engineering Technical Conference, September 2005.

  20. Zha, X.F. and Sriram, R.D., Feature-based Component Model for Design of Embedded System, in Intelligent Systems in Design and Manufacturing V, edited by B. Gopalakrishnan, Proceedings of SPIE Vol.5605 (SPIE, Bellingham, WA, 2004), pp. 226-237.

  21. Zha, X.F., Foufou, S., Sudarsan, R., and Sriram, R.D., Analysis and Evaluation for STEP-based Electro-Mechanical Assemblies: An Integrated Fuzzy AHP Approach, Proceedings of 2004 ASME Design Engineering Technical Conference, Paper No.: DETC2004/CIE-57708, September 28-October 2, 2004, Salt Lake City, Utah, USA

  22. Zha, X.F. and Sriram, R.D., Collaborative Product Development and Customization: A Platform-based Strategy and Implementation, Proceedings of 2004 ASME Design Engineering Technical Conference, Paper No.: DETC2004/CIE-57709, September 28-October 2, 2004, Salt Lake City, Utah, USA.

  23. Szczypinski, P., Sriram, R.D. , Sriram, P., Reddy, D., Model of Deformable Rings for Aiding the Wireless Capsule Endoscopy Video Interpretation and Reporting, Proceedings of the International Conference on Computer Vision and Graphics 2004, Warsaw, Poland, September 22-24, 2004.

  24. Baysal, M.M., Roy, U., Sudarsan, R. , Sriram, R.D. , Lyons, K., The Open Assembly Model for the Exchange of Assembly and Tolerance Information: Overview and Example, Proceedings of the DETC 2004 ASME Design Engineering Technical Conferences, Salt Lake City, UT, September 28 - October 2, 2004

  25. Zha, X., Sriram, R.D., Lu , W., Knowledge Intensive Collaborative Decision Sup­port for Design Process, Proceedings of DETC'03, ASME 2003 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, Illinois USA, September 2-6, 2003, Paper No. DETC 2003/DAC-48747.

  26. Wang, H., Roy, U., Sudarsan, R., Sriram, R. D., Lyons, K.W., Functional Toleranc­ing of a Gearbox, North American Manufacturing Research Conference (NAMRC) May 20-24, 2003, McMaster University, Hamilton, Ontario, Canada.

  27. Sudarsan, R., Han, Y., Feng, S.C., Roy, U., Wang, F., Sriram, R.D., Lyons, K. W., Object-Oriented Representation of Electro-Mechanical Assemblies Using UML, In­ternational Symposium on Assembly and Task Planning, ISATP 03, July 9-12, France, 2003.

  28. Wang, F., Fenves, S.J., Sudarsan, R., and Sriram, R.D., Towards Modeling the Evolution of Product Families, International Design Engineering Technical Confer­ences and Computers and Information in Engineering Conference, Chicago, Illinois, September 2-6, 2003.

  29. Wang, H., Roy, U., Sudarsan, R., Sriram, R.D., Lyons, K.W., Synthesis Of Ge­ometric Tolerances Of A Gearbox Using A Deviation-Based Tolerance Synthesis Scheme, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, Illinois, September 2-6, 2003.

  30. Wang, F., Fenves, S.J., Sudarsan, R., and Sriram, R.D., AProduct Information Modeling Framework For Product Lifecycle Management, International Symposium on Product Lifecycle Management, Bangalore, India, 2003. (under WERB)

  31. Ilinkin, I., Janardan, R., Majhi, J., Schwerdt. J., Smid, M., and Sriram, R., A Decomposition-based Approach to Layered Manufacturing,In Proc. 7th Interna­tional Workshop on Algorithms and Data Structures, Providence, RI, Aug. 8-10, 2001, pp. 389-400. (LNCS 2125: eds. F. Dehne, J-R. Sack, and R. Tamassia.)

  32. Sriram, R. D. et al., Standards for Collaborative Design, Keynote Lecture, In Pro­ceedings of te 8th ISPE International Conference on Concurrent Engineering: Re­search and Applications, ISBN:0-9710461-0-7, July 2001.

  33. Sriram, R. D. and Szykman, S., Design Repositories and Product Representation for Collaborative Product Development, Keynote Lecture, Extended Abstract, In Proceedings of the Sixth International Conference on CSCW in Design, July 2001 (http://www.cscwid.org/ )

  34. Allen, R., Fijol R., Szykman, S., and Sriram, R,. Representing an Artifact Trans­port System in a Design Repository: A Case Study, Paper No. DETC2000/CIE-14608, Baltimore, MD, September 2000.

  35. Patil, L., Dutta, D., Bhatt, A.D., Jurrens, K., Lyons, K., Pratt, M.J., Sriram, R.D., Representation of Heterogeneous objects in ISO 10303 (STEP), ASME Congress, Orlando, FL, November 2000.

  36. Szykman, S., Racz, J. W., and Sriram, R. D., The Representation of Function in Computer-based Design, Proceedings of the 1999 ASME Design Engineering Tech­nical Conferences (11th International Conference on Design Theory and Method­ology), Paper No. DETC99/DTM-8742, Las Vegas, NV, September, 1999.

  37. Szykman, S., Senfaute, J., and Sriram, R. D., Using XML to Describe Function and Taxonomies in Computer-based Design, Proceedings of the 1999 ASME Design En­gineering Technical Conferences (19th Computers and Information in Engineering Conference), Paper No. DETC99/CIE-9025, Las Vegas, NV, September, 1999.

  38. Sudarsan, R., Lyons, K. W., Duffey, M., and Sriram, R. D., Information Models for Design Tolerancing,International Metrology Forum 98, Quebec, Canada, Nov 21-25 1998.

  39. Roy, U., Sudarsan, R., Sriram, R. D., Lyons, K. W., Duffey, M. R., Information models for Design Tolerancing: From Conceptual to the Detail Design, ASME, DETC99 Conference, Las Vegas, Nevada, September, 1999.

  40. Feng, S., Nederbragt, W., Kaing, S., and Sriram, R., Incorporating Process Plan­ning Into Conceptual Design, Proceedings of the 1999 Design Engineering Technical Conferences -the Design for Manufacturing Conference, 1999.

  41. Nidamarthi, S., Allen, R. H., Regalla, S., and Sriram, R. D., Observations from Multidisplinary, Internet-based Collaboration on a Practical Design Project, 1999 International Conference on Engineering Design (ICED99), Munich Germany, 1999.

  42. Allen, R., Nidamarthi, S., Regalla, S. P., Sriram, R. D., Enhancing Collaboration Using an Internet-Integrated Workbench, 25th ASME Design Automation Confer­ence, 1999.

  43. Allen, R., Nidamarthi, S., Sriram, R. D., Teague, C., Rohrer, R., Collaborating on the Design and Manufacture of an Atomic Artifact Transport SystemA Case Study in VRML as a Visualization Tool for Consensus Building, DETC98/DAC-5600, ASME Design Automation Conference, September, 1998.

  44. Nederbragt, W.W., R. Allen, S. Feng, S. Kaing, R. Sriram, Y. Zhang, An Overview of the NIST Design/Process Planning Project, Artificial Intelligence and Manufac­turing Workshop, Albuquerque, NM, August 31 to September 2, 1998.

  45. Sudarsan, R., Narahari, Y, Lyons, K. Duffey, M, and Sriram, R.D., Design for Tolerance of Electro-mechanical Assemblies, IEEE International Conference on Robotics and Automation, Belgium, May 16-21 1998.

  46. Szykman, S. and Sriram, R. D., Internet-Based Delivery of CAD/CAM Capabil­ity: An Industry Case Study, Proceedings of the ASME 1998 Design Engineering Technical Conferences (18th Computers in Engineering Conference), Paper No. DETC98/CIE-5520, Atlanta, GA, September, 1998.

  47. Dutta, D., Kumar, V., Pratt, M.J., and Sriram, R.D., Towards STEP-based Data Transfer in Layered Manufacturing, IFIP WG5.3 Conference PROLAMAT '98, to be held in Trento, Italy, September 1998.

  48. Sudarsan, R., Lyons, K., Narahari, Y., and Duffey, M., Design for Tolerance of Electro-mechanical Assemblies, 3rd National Seminar on Tolerancing and Assembly Modeling, October 9-10, 1997, Ann Arbor, MI, 1997.

  49. Murdock, J. W., S. Szykman and R. D. Sriram, An Information Modeling Frame­work to Support Design Databases and Repositories, Proceedings of the ASME 1997 Design Engineering Technical Conferences (Design for Manufacturing Conference), Paper No. DETC97/DFM-4373, Sacramento, CA, September, 1997.

  50. Peña-Mora, F., Sriram, D., and Logcher, R., Conflict Management using SHARED­DRIMS, Proceedings of the First International Conference/Congress on Computing in Civil Engineering, ASCE, Washington, D.C., June 1994.

  51. Gorti, S. and Sriram, D., Symbol to Structure Mapping in Conceptual Design, Proceedings of the First International Conference/Congress on Computing in Civil Engineering, ASCE, Washington, D.C., June 1994.

  52. Wong, A. and Sriram, D., AFormal Product/Process Model for Engineering, Pro­ceedings of the First International Conference/Congress on Computing in Civil Engineering, ASCE, Washington, D.C., June 1994.

  53. Peña-Mora, F., Sriram, D., and Logcher, R., SHARED-DRIMS: A Proactive Project Management System for Conflict Management, Proceedings of the IJCAI-93 Work­shop on Computational Models of Conflict Management in Cooperative Problem Solving, 1993.

  54. Gupta, A., Gorti, S., and Sriram, D., Representing Design Knowledge: Function, Form, and Behavior,In Proceedings of the AAAI Workshop on Reasoning about Function, AAAI, 1993.

  55. Sriram, D., Towards a Comprehensive Knowledge-Base for Engineering, AAAI Fall Symposium on Intelligent Scientific Computing, AAAI Technical Report, FS 92-01, 1992.

  56. Sriram, D. , Real time AI systems,InInteligencia A rtificial y control en tiempo real, pp.5 7 -9 6 . In st i tutodeIn genieri' adel Conocimiento-Repsol S.A., 1992.

  57. Fromont, B. and Sriram, D., Constraint Satisfaction as a Planning Process,AIin Engineering Design, Held at Carnegie-Mellon University, July, Kluwer Publishers, July 1992.

  58. Fromont, B. and Sriram, D., Using Planning Techniques to Solve CSP, Proceedings of Avignon'92, June 1-6, 1992.

  59. Sriram, D., Design as a Collaborative Process, Proceedings of the UCLA Workshop on AI in Engineering,

  60. Gero, J. and Sudweeks, F. (Editors), Design Computing Unit, University of Sydney, Australia, January 1992.

  61. Ahmed, S., Sriram, D., and Logcher, R., Transaction and Version Management in Object-Oriented Databases, Seventh ASCE Conference on Computing in Civil Engineering, Washington, D.C., 1991 [Also accepted for publication in the ASCE Journal of Computing in Civil Engineering].

  62. Ahmed, S., Sriram, D., and Logcher, R., A Comparative Analysis of Object Ori­ented Databases for Collaborative Engineering Work, Seventh ASCE Conference on Computing in Civil Engineering, Washington, D.C., 1991.

  63. Sriram, D., Logcher, R., Wong, A., Ahmed, S., and Cheong, K., Toools and Tech­niques for Collaborative Product Development, NSF 17th Grantees Conference for Design and Manufacturing, Austin, 1991.

  64. Favela, J., Thomas, J., and Sriram, D., Seismic Evaluation of Building Configu­rations, Third Symposium on Artificial Intelligence: Applications of Engineering Design, Manufacturing & Management in Industrialized and Developing Countries, Oct., 1990, Mexico.

  65. Logcher, R. and Sriram, D., CAE Systems for Distributed Design,International Symposium on Building Economics and Construction Management, Sydney, Aus­tralia, March 1990.

  66. Meltzer, D. and Sriram, D., A Knowledge-based System for Actuarial Funding Pro­cedures, Innovative Applications of AI, Sponsored by AAAI, Washington, March 1990.

  67. Wong, A., Sriram, D., and Logcher, R., User Interfaces for Cooperative Product Development, Proceedings of the Second National Symposium on Concurrent En­gineering, West Virginia University, Feb., 1990.

  68. Sriram, D. and Groleau, N., Object Oriented Databases for Cooperative Design, Sixth ASCE Conference on Computing in Civil Engineering, Atlanta, Georgia, September, 1989.

  69. Sriram, D. Logcher, R., and Groleau, N., A Framework for for a Computer In­tegrated Design and Construction System, International Conference on Computa­tional Engineering Science, Atlanta, Georgia, April 1988 [Invited].

  70. Sriram, D., Logcher, R., and Wang, M-T., Applied Natural Language Processing: An Overview,International Conference on Computational Engineering Science, Atlanta, Georgia, April 1988 [Invited].

  71. Reddy, D. V., Arockiasamy, M., Sriram, D., and Connor, J., Knowledge-Based Systems for Design and Analysis of Offshore Structures, In ASME Conference on Computers in Artic Regions, Feb. 1988.

  72. Sriram, D., et al., Artificial Intelligence in Engineering Design: The M. I. T. Perspective, IEEE Systems and Signals Workshop, Bangalore, India, January 1988 [Invited].

  73. Navinchandra, D., Sriram, D., and Kedar-Cabelli, S. The Role of Analogy in Engi­neering Problem Solving,In Applications of Artificial Intelligence in Engineering, Boston, USA, August 1987.

  74. Sriram, D. and Maher, M. L. The Representation and Use of Constraints in Struc­tural Design,In Applications of Artificial Intelligence in Engineering, UK, Compu­tational Mechanics Ltd., April 1986.

  75. Pandit, N. and Sriram, D., Micro-Computer Based Expert Systems in Engineering: An Example,In Proceedings of the Expert Systems in Government Symposium, Washington, D. C., October 1985.

  76. Sriram, D. and Fenves, S. J., DESTINY: A Knowledge-Based Approach to Inte­grated Structural Design, In Proceedings of the Artificial Intelligence Symposium, Ecole Polytechnic, Montreal Canada, November 1984.

  77. Sriram, D. and Swamidas, A. S. J., Analysis of an Offshore Production Platform in a Random Wave Field, In Proceedings of the Ocean Structural Dynamics Sym­posium, Oregon State University, September 1984.

  78. Fenves, S. J., Maher, M. L., and Sriram, D., Knowledge-based Expert Systems in Civil Engineering, In Proceedings 3rd ASCE International Conference on Electronic Computation, April 1984.

  79. Reddy, D. Sriram, Maher, M., Tyle, N., Ba˜nares, R., Rychener, M, Fenves, S. J., Knowledge-based Expert Systems for Engineering Applications, In Proceedings IEEE International Conference on Man, Systems and Cybernetics, December 1983 -Jan 1984, India.

  80. Bielak, J. and Sriram, D., On Response of Beams on Elastic Foundations,In Pro­ceedings of the ASCE EMD Specialty Conference, Purdue University, May 1983.

  81. Sriram, D., Maher, M. and Fenves, S. J., Applications of Expert Systems in Struc­tural Engineering, In Proceedings Conference on Artificial Intelligence, Oakland University, Rochester, April 1983.

Technical Reports

  1. Simmon, E., Kim, K., Subrahamanian, E., Lee, R., de Vaulx, F., Murakami, Y., Zettsu, K., and Sriram, R.D., A Vision of Cyber-Physical Cloud Computing for Smart Networked Systems, NIST IR 7951, 2013.
  2. Sriram, R. D., Bock, C.E., Neuhaus, F.M., Wallace, E.K., and Brady, M., NIST Workshop on Ontology Evaluation, NIST IR 7774, April 01 2011.
  3. Feng, S., Lee, H., Joung, G., Kramer, T., Ghodous, P., and Sriram, R.D., Information Model for Disassembly for Reuse, Recycling, and Remanufacturing, NIST IR 7772, April 2011.
  4. Sudarsan, R., Sriram, R.D., Narayanan, A., Sarkar, P., Lee, J-H, Lyons, K., Kemmerer, S., Sustainable Manufacturing: Metrics, Standards, and Infrasctructure – Workshop Summary, NIST IR 7683, April 2010.
  5. Lee, J., Suh, H., Fenves, S.J., Sudarsan, R., Fiorentini, X., and Sriram, R.D., A Multi-layered Semantic Framework for Modeling Lifecycle Information, NISTIR 7681, April 2010.
  6. Weissman, A., Gupta, S.K., Fiorentini, X., Sudarsan, R., and Sriram, R.D., Formal Representation of Product Design Specifications for Validating Product Designs, NIST IR 7826, August 2010.
  7. Ameta, G., Mani, M., Sudarsan, R., Lyons, K.W., Feng, S.C., and Sriram, R.D., Carbon Weight Analysis for Machining Operation and Allocation for Redesign, NIST IR 7560, December 2009.
  8. Cardone, A., Sriram, R.D., Albers, W., and Pant, H.C., Study of Interaction of the Cyclin-dependent Kinase 5 with its Activator, p25 and with the p25-derived Inhibitor, NIST IR 7552, January 2009.
  9. Weissman, Alex, Gupta, Satyandra K, Fiorentini, Xenia,  Sudarsan, Rachuri,  Sriram, Ram D., Formal Representation of Product Design Specifications for Validating Product Designs, NISTIR 7626, August 2009.
  10. Ameta, G., Sudarsan, R., Fiorentini, X., Mani, M., Lyons, K., Sriram, R.D., Extending the Notion of Quality from Physical Metrology to Information and Sustainability, NIST IR 7517, July 2008.
  11. Fiorentini, X., Sudarsan, R., Mani, M., Fenves, S., and Sriram, R.D., An Evaluation of Description Logic for the Development of Product Models, NIST IR 7481, April 2008.
  12. Sriram, R.D., and Fenves, S.J. Manufacturing Metrology and Standards for the Healthcare Enterprise: Program Summary, NIST IR 7487, April 2008.
  13. Clarke, L., Sriram, R.D., Imaging as a Biomarker: Standards for Change Measurements in Therapy, Proceedings of the United States Measurement System (USMS) Workshop, NIST, Gaithersburg, MD, September 14-15, 2006, 2007.
  14. Kim, Junhwan, Pratt, Mike , Iyer, R., Sriram, R.D., Data Exchange of Parametric CAD Models Using ISO 10303-108, NISTIR 7433, 2007.
  15. Fenves, Steven, Subrahmanian, Eswaran, Goyal, P. , Angbo, J., Daoud, F., Sriram, R.D., The Architecture Development Facilitator (ADF) First Year Report, NISTIR 7411, (2007)
  16. Subrahmanian, Eswaran, Rachuri, Sudarsan, Bouras, A., Fenves, Steven, FouFou, Sebti, Sriram, R.D., The Role of Standards in Product Lifecycle Management Support, NISTIR 7289, 2006.
  17. Bock, C, Carnahan, L., Fenves, Steven, Gruninger, Michael, Kashyap, V., Lide, B., Nell, James , Raman, R., Sriram, R.D., Healthcare Strategic Focus Area: Clinical Informatics, NISTIR 7263, 2005.
  18. Fenves, Steven, FouFou, Sebti, Bock, C, Bouillon, N., Sriram, R.D. , CPM 2: A Revised Core Product Model for Representing Design Information, NISTIR 7185, 2005.
  19. Subrahmanian, Eswaran, Rachuri, Sudarsan , Fenves, Steven, FouFou, Sebti, Sriram, R.D. , Product Lifecycle Management Support: A Challenge in Supporting Product Design and Manufacturing in a Networked Economy, NISTIR 7211, 2005
  20. Fenves, S., Sriram, R.D., Choi, Young, Elm, J. P., Robert, J.E., Advanced Engineering Environments for Small Manufacturing Enterprises: Volume II, NISTIR 7090, 2004.
  21. Sudarsan, R., Baysal, M.M., Roy, U., Fouou, S., Fenves, S., Subrahmanian, E., Lyons, K., Sriram, R.D., Information Models for Product Representation: Core and Assembly Models, NISTIR 7173, 2004.
  22. Fenves, S., Sriram, R.D., Choi, Y., Elm, J.P, and Robert, J.E., Advanced Engineering Environments for Small Manufacturing Enterprises: Volume I, NISTIR 7055, 2003.
  23. Sudarsan, R., Han, Y-H, Feng, S., Roy, U., Wang, F., Sriram, D., and Lyons, K., Object-Oriented Representation of Electro-Mechanical Assemblies Using UML, NIST IR 7057, National Institute of Standards and Technology, 2003.
  24. Fenves, S. J., Choi, Y., Gurumoorthy, B., Mocko, G., and Sriram, R. D., Master Product Model for the Support of Tighter Integration of Spatial and Functional Design, NISTIR 7004, National Institute of Standards and Technology (NIST), Gaithersburg, MD, 2003.
  25. Pramanik, N., Wang, H., Lyons, K.W., Sriram, R.D., Sudarsan, R., Tolerance Synthesis Scheme, NIST IR 6836, National Institute of Standards and Technology, 2003.
  26. Sriram, R.D., Szykman, S., The NIST Design Repository Project: Project Overview and Implementation Design, NIST IR 6926, National Institute of Standards and Technology, 2002.
  27. Allen, R.H., Pellegrino, J., Monk, D.H., Teague, E.C., Swyt, D.A., Fu, J., Silver, R.M., Vorburger, T.V., Damazo, B.N., Russell, R., Stouffer, K.A., Wheatley, T.E., Osti, M., Wilmering, D., Rhorer, R.L., Sriram, R.D., Nanomanufacturing of Atom-Based Dimensional Standards -A Final Project Report of the NAMT, NISTIR 6850, 2002.
  28. Allen, R. and Sriram, R. D., (editors), Proceedings of the 1997 Knowledge-based Interoperability Workshop, NIST IR 6111, National Institute of Standards and Technology, 1998.
  29. Narahari, Y., Sudarsan, R., Lyons, K., Duffey, M., and Sriram, R.D., Design for Tolerance of Electro-mechanical Assemblies: An Integrated Approach, NIST IR 6223, National Institute of Standards and Technology, 1998.
  30. Szykman, S., Sriram, R.D., and Smith, S. J. (editors), Proceedings of the NIST De­sign Repository Workshop, National Institute of Standards and Technology, 1998.
  31. Sriram, Ram, et al., Overview and Vision of the NIST Engineering Design Tech­nologies Group, NIST IR 5827, National Institute of Standards and Technology, Sept. 1996.
  32. Kano, M., Sriram, D., and Gupta, A., International Multi-Company Collaborative Engineering: Strategies of Japanese Engineering and Construction Firms,Intelli-gent Engineering Systems Laboratory, Dept. of Civil and Environmental Engineer­ing, Technical Report No: IESL, May 1994.
  33. Wong, A. and Sriram, D., Shared Workspaces for Computer-aided Collaborative Engineering, Intelligent Engineering Systems Laboratory, Dept. of Civil and En­vironmental Engineering, Technical Report No: IESL 93-06, March 1993.
  34. Sriram, D., Wong, A., and He, L., GNOMES: An Object-Oriented Non-manifold Geometric Modeler,Intelligent Engineering Systems Laboratory, Dept. of Civil and Environmental Engineering, February 1993.
  35. Sriram, D., Object-Oriented Systems: An Overview, IESL-92-08, Intelligent En­gineering Systems Laboratory, Dept. of Civil and Environmental Engineering, November 1992.
  36. Wong, A. and Sriram, D., Geometric Modeling for Cooperative Product Devel­opment, IESL-92-04, Intelligent Engineering Systems Laboratory, Dept. of Civil Engineering, October 1992.
  37. Ahmed, S., Wong, A., Sriram, D., and Logcher, R., A Comparison of Object-Oriented Database Management Systems for Engineering Applications, IESL-90-03, IESL-91-03, Intelligent Engineering Systems Laboratory, Dept. of Civil Engineer­ing, May, 1990, 1991.
  38. Sriram, D., Ahmed, S., and Logcher, R., ATransaction Management Framework for Collaborative Engineering Using OODBMS, IESL-91-02, Intelligent Engineering Systems Laboratory, Dept. of Civil Engineering, May, 1991.
  39. Sriram, D., Wong, A., and Logcher, R., Shared Workspaces in Computer Aided Co­operative Product Development, IESL-91-04, Intelligent Engineering Systems Lab­oratory, Dept. of Civil Engineering, May, 1991.
  40. Sriram, D., Computer Aided Collaborative Product Development, IESL-91-05, IESL-92-02, Intelligent Engineering Systems Laboratory, Dept. of Civil Engineering, May, 1991, 1992.
  41. Wong, A., Fromont, B., and Sriram, D., COSMOS Version 1.0: User Manual, IESL-91-06, Intelligent Engineering Systems Laboratory, Dept. of Civil Engineer­ing, May, 1991.
  42. Sriram, D., et al., An Object-Oriented Knowledge-Based Building Tool for En­gineering Applications, IESL-91-07, Intelligent Engineering Systems Laboratory, Dept. of Civil Engineering, May, 1991.
  43. Sriram, D., Logcher, R., Wong, A., and Ahmed, S., A Case Study in Computer Aided Cooperative Product Development, IESL-90-01, Intelligent Engineering Sys­tems Laboratory, MIT, March 1990.
  44. Sriram, D., KREEPS: A Knowledge Representation Language for Engineering Problem Solving (Proposal submitted to NSF),Intelligent Engineering Systems Lab­oratory, July 1989.
  45. Sriram, D. and Joobhani, R., A Bibliography on Knowledge-based Expert Systems in Engineering, SIGART Newsletter, July 1984 & July 1989.
  46. Sriram, D., Studies on the Impact of Computer-based Technologies in the Engineer­ing Industry, Prepared for the National Academy of Sciences, July 1986.
  47. Sriram, D., Knowledge-Based Expert Systems: Collected Papers, Prepared for In­formation Technology Institutes, Maryland, July 1985.
  48. Sriram, D., et al, Knowledge-Based Expert Systems: An Emerging Technology for CAD in Chemical Engineering, Design Research Center Technical Report, Carnegie-Mellon University, December 1984 (also appeared in Chemical Engineer­ing Progress, September 1985 and COMPINT85)
  49. Fenves, S. J., Maher, M. L., Rehak, R., Rychener, M., Sriram, D., PDS MOVER: Development of a PDS Expert System Prototype for Peoplemover Operation and Maintenance, Civil Engineering and Construction Robotics Laboratory, Depart­ment of Civil Engineering and Robotics Institute (distribution limited), Carnegie-Mellon University, May 1984.
  50. Sriram, D., Mullarkey, P., Bielak, J. and Fenves, S. J., Potentials for Robotics and Artificial Intelligence in Tunnel Boring Machines, Robotics Institute (distribution limited), Carnegie-Mellon University, January 1983.
  51. Fenves, S. J, Rehak, D., Bielak, J., Rychener, M., Sriram, D., and Maher, M. L., Feasibility of an Expert System for Atlanta Peoplemover Project, Robotics Institute (distribution limited), Carnegie-Mellon University, December, 1982.
  52. Sriram, D., Maher, M. L., Bielak, J. and Fenves, S. J., Expert Systems for Civil Engineering -A Survey, Department of Civil Engineering, Carnegie-Mellon Uni­versity, Report No. R-82-137, June 1982.
  53. Sriram, D., Response of a Beam on an Elastic Foundation: A Unified Variational Approach, M.S. thesis, Department of Civil Engineering, CMU, Pittsburgh, PA 15213.
Digital evidence, Information technology, Conformance testing, Health IT, Software testing and Voting systems
Created November 29, 2010, Updated April 2, 2019