Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Fatigue Crack Growth Rates in Five Pipeline Steels

Published

Author(s)

Arry Bussiba, Philippe P. Darcis, J D. McCloskey, Christopher N. McCowan, Thomas A. Siewert, Gabriel Kohn, R P. Smith, J. Merritt

Abstract

This study presents fatigue data for six different pipeline steels, with strengths ranging from Grade B to X100. A fatigue crack growth test for full-thickness pipeline samples was developed using a Middle Tension (MT) type specimen. The six steels showed similar fatigue crack growth rate (da/dN) behavior. There were only minor differences among the steels for the threshold values and most of the stable crack growth regime. Larger differences were observed in the final stages of crack growth and fatigue failure. The effect of compressive residual stresses at the outer surface of the pipeline was also examined. A Failure Assessment Diagram technique was used to evaluate the potential failures modes of the six pipeline steels, containing, as an example, an internal surface, semi-elliptic, axially oriented flaw. Mixed-mode failure was predicted for all of the steels.
Conference Location
, 1
Conference Title
IPC 2006

Keywords

failure assessment diagram, fatigue, pipeline steel

Citation

Bussiba, A. , Darcis, P. , McCloskey, J. , McCowan, C. , Siewert, T. , Kohn, G. , Smith, R. and Merritt, J. (2006), Fatigue Crack Growth Rates in Five Pipeline Steels, IPC 2006, , 1, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=50360 (Accessed March 29, 2024)
Created August 31, 2006, Updated October 12, 2021