Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

The Role of Space Charge in Scanned Probe Oxidation

Published

Author(s)

John A. Dagata

Abstract

The growth rate and electrical character of nanostructures produced by scanned probe oxidation are investigated by integrating an in-situ electrical force characterization technique, scanning Maxwell-stress microscopy, into the fabrication process. Simultaneous topographical, capacitance, and surface potential data are obtained for oxide features patterned on n- and p-type silicon and titanium thin-film substrates. The electric field established by an applied voltage pulse between the probe tip and substrate depends upon reactant and product ion concentrations associated with the water meniscus at the tip-substrate junction and within the growing oxide film. Space-charge effects are consistent with the rapid decline of high initial growth rates, account for observed doping and voltage-pulse dependencies, and provide a basis for understanding local density variations within oxide features. An obvious method for avoiding the build-up of space charge is to employ voltage modulation and other dynamic pulse-shaping techniques during the oxidation pulse. Voltage modulation leads to a significant enhancement of the growth rate and to improvements in the aspect ratio compared with static voltage pulses.
Citation
Applied Physics
Volume
84(12)

Keywords

anodic oxidation, scanned probe microscopy, scanning Maxwell-stress microscopy, silicon, titanium

Citation

Dagata, J. (1998), The Role of Space Charge in Scanned Probe Oxidation, Applied Physics (Accessed March 28, 2024)
Created January 1, 1998, Updated February 19, 2017