Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Conformal Oxides on Si Surfaces

Published

Author(s)

V W. Tsai, S. Wang, E. C. Williams, J Schneir, Ronald G. Dixson

Abstract

The characteristics of the Si-vacuum interface were compared with the characteristics of the oxide-air interface formed following room temperature oxidation for a variety of samples. Scanning tunneling microscopy was used to measure the surface structure following vacuum preparation, and atomic force microscopy was used to measure the oxide surface on the same samples following exposure to air. Samples investigated included nominally flat Si(111) with equilibrated and quenched surface configurations, Si(111) miscut by 1.25 degrees toward the [211] and equilibrated to yield the faceted structure, and nominally flat Si(001) wafers. In all cases, the step morphology of the clean surfaces was duplicated on the surface of the oxide.
Citation
Applied Physics Letters
Volume
71

Keywords

conformal oxides, oxide surface, oxide-air interface, Si surfaces, Si-vacuum interface, surface structure

Citation

Tsai, V. , Wang, S. , , E. , Schneir, J. and Dixson, R. (1997), Conformal Oxides on Si Surfaces, Applied Physics Letters (Accessed March 28, 2024)
Created September 15, 1997, Updated February 19, 2017