Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Characterization of Materials Using an Ultraviolet Radiometric Beamline at SURF III

Published

Author(s)

Ping-Shine Shaw, R Gupta, Thomas A. Germer, Uwe Arp, Thomas B. Lucatorto, Keith R. Lykke

Abstract

The completion of the upgrade of the synchrotron facilities at the National Institute of Standards and Technology (NIST) has yielded a better-characterization broadband source of ultraviolet (UV) radiation at the Synchrotron Ultraviolet Radiation Facility (SURF III). A crogenic-radiometer based facility that uses the monochromatized radiation from SURF III has been established on beamline 4 (BL-4) to characterize detectors and optical materials in the wavelength range from 125 nm to 325 nm. This upgraded cryogenic radiometry facility will be used to measure the spectral responsivity of detectors in the UV with a relative standard uncertainty of less than 10-2. To demonstrate the capability of BL-4, we have performed a transmittance measurement of calcium fluoride (CaF2). Accurate transmittance measurements of optical material in the UV are urgently needed to evaluate which materials are the best choices for use in making lenses for UV lithography. A study of CaF2 in spectral transmittance, surface scattering, and surface absorption is presented.
Citation
Metrologia

Keywords

beamline, calcium, cryogenic, radiometry, transmissivity, ultraviolet

Citation

Shaw, P. , Gupta, R. , Germer, T. , Arp, U. , Lucatorto, T. and Lykke, K. (2000), Characterization of Materials Using an Ultraviolet Radiometric Beamline at SURF III, Metrologia (Accessed March 28, 2024)
Created January 1, 2000, Updated February 17, 2017