Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Calibration of a Heat Flux Sensor Up to 200 kW/m2 in a Spherical Blackbody Cavity

Published

Author(s)

A V. Murthy, Benjamin K. Tsai, Robert D. Saunders

Abstract

This paper presents the results of a comparative study of narrow view-angle and wide view-angle calibrations of a water-cooled Schmidt-Boelter heat-flux sensor. The narrow view-angle calibration, up to a heat flux level of 50 kW/m2, was conducted using the 25 mm Variable Temperature Blackbody (VTBB) facility. An electrical substitution standard was used as a transfer standard to determine the flux level at the sensor plane. The wide view-angle calibration was conducted by placing the sensor inside the radiating cavity of a spherical blackbody. The calibration in the spherical blackbody is based on the heat-flux derived from the Stefan-Boltzmann equation using the blackbody temperature measured from a type-S thermocouple. The calibration covered an extended range from 50 kW/m2 to 200 kW/m2. Results of the calibration of the heat-flux sensor using the two different techniques are presented. A discussion of the problems associated with calibrating sensors at high heat-flux levels by inserting the sensor inside a blackbody cavity is also presented.
Citation
Thermal Measurements: The Foundation of Fire Standards
Volume
1427
Publisher Info
ASTM International, West Conshohocken, PA

Keywords

blackbodies, heat flux, sensors, thermal radiation

Citation

Murthy, A. , Tsai, B. and Saunders, R. (2002), Calibration of a Heat Flux Sensor Up to 200 kW/m<sup>2</sup> in a Spherical Blackbody Cavity, ASTM International, West Conshohocken, PA (Accessed March 28, 2024)
Created December 31, 2001, Updated October 12, 2021