Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Measurements of Air Jet Removal Efficiencies of Spherical Particles from Cloth and Planar Surfaces

Published

Author(s)

Robert A. Fletcher, Nathanael Briggs, Erin Ferguson, J Greg Gillen

Abstract

Experiments were conducted to determine particle removal efficiencies from surfaces due to air jet impingement. We utilize monodisperse fluorescent polymer spheres ranging from 1 μm to 45 μm diameter distributed on polycarbonate surfaces and muslin cloth. Particle removal efficiencies are determined from cloth that simulates clothing or fabrics, surfaces important for trace explosives detection. Optical images of the sample surface are taken using a fluorescence microscope (488nmradiation) before and after being challenged by a pulsed air or nitrogen jet. The jet is oriented at 45 degrees with respect to the particle laden substrate and is precisely aligned onto the center of the optical axis of the microscope. Particle removal rates are determined by automated particle counting implemented by image processing and analysis.We found that the cloth surface has a release rate comparable to the rate for polycarbonate surface under similar jet conditions. As expected, there is a particle size dependence on removal efficiency, with larger particles being more easily removed.
Citation
Aerosol Science and Technology
Volume
42
Issue
12

Citation

Fletcher, R. , Briggs, N. , Ferguson, E. and Gillen, J. (2008), Measurements of Air Jet Removal Efficiencies of Spherical Particles from Cloth and Planar Surfaces, Aerosol Science and Technology, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=902093 (Accessed March 28, 2024)
Created November 30, 2008, Updated October 12, 2021