Nelson, T.
(1998),
Power and Energy Measurements at NIST, 1998 National Conference of Standards Laboratories Workshop and Symposium (NCSL), Albuquerque, NM, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=19
(Accessed April 20, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Power and Energy Measurements at NIST
Published
Author(s)
Abstract
The NIST calibration service that provides electric energy traceability for the U.S. utility industry is described. Electronic watthour meters, submitted for test, are measured using the NIST Power Bridge, in which complex ac power is defined in terms of the more basic units of voltage, resistance, and capacitance. By integrating power over a known time period, the unit of energy is defined. Calibrations are performed using a synthetic loading technique at power levels between 0 and 60 kW. The basic uncertainty of the NIST Power Bridge is about 15 ppm at 120 V, 5 A, 0 to 1.0 power factor, at 60 Hz. However, calibration uncertainties depend on the power level and the instrument type. Typical uncertainties (k=2) are between 50 and 500 parts per million. A Measurement Assurance Program for 60 Hz energy is also available.Proceedings Title
1998 National Conference of Standards Laboratories Workshop and Symposium (NCSL)
Conference Dates
July 19-23, 1998
Conference Location
Albuquerque, NM
Pub Type
Conferences
Download Paper
Keywords
calibration, energy, power, standards, testing, watthour meters
Citation
Created July 1, 1998, Updated February 19, 2017