Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

VISCOSITY AND DENSITY OF CuO NANOLUBRICANT

Published

Author(s)

Mark A. Kedzierski

Abstract

This paper presents liquid kinematic viscosity and density measurements of a synthetic polyolester based copper (II) oxide (CuO) nanoparticle dispersion (nanolubricant) at atmospheric pressure for a temperature range from approximately 288 K to 318 K. The polyolester was a commercially available chiller lubricant. The CuO particles were approximately 30 nm diameter, spherical, and well dispersed in the lubricant. Viscosity and density measurements were made for the pure base lubricant along with three nanolubricants with differing nanoparticle mass fractions (2.9 %, 5.6 % and 39.2 %). The viscosity and the density were shown to increase with respect to increasing nanoparticle mass fraction. Correlations of the viscosity and the density are presented as a function of temperature and nanoparticle concentration. The measurements are important for the design of nanolubricants for heat transfer and flow applications.
Citation
International Journal of Refrigeration-Revue Internationale Du Froid

Keywords

viscosity, density, lubricant, nanoparticles, CuO, chiller

Citation

Kedzierski, M. (2012), VISCOSITY AND DENSITY OF CuO NANOLUBRICANT, International Journal of Refrigeration-Revue Internationale Du Froid (Accessed March 29, 2024)
Created June 14, 2012, Updated February 19, 2017