💲💲💲💲 евразийский банк онлайн заявка на кредит 💲 Перейти: 👉 💲 WWW.LOAN24H.XYZ 💲 💶 каспи банк онлайн заявка кредит 💶 🌎 мусульманский банк в казахстане и кредиты 🌎 ✅ народный банк экибастуз кредиты ✅ ✉️ потребительский кредит от каспийского банка ✉️ ☀️ казахстан банки кредиты ☀️ 💶 заявка на кредит банк нурсултана 💶 кредиты банков алматы, кредит в народном банке казахстана, кредиты от казком, онлайн кредит на банковскую карту в казахстане, быстрые онлайн кредиты на карту в казахстане, кредиты в народном банке алматы, каспий банк кокшетау кредит - Search Results

DATA/ALK3.D/data.ms �2���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 SEP 104 10:28 ���������������������������������������������������������������÷ě���z�������������ű� )q��sö�5÷l��4�����������������������������������������������������������������������������������������������������������������������������������������...

MINEX2-unsorted-pruned-CC/README The MINEX II Sample Data for Matching is comprised of 42 templates in ISO compact card format. These templates were created from ANSI 378 templates, and are not sorted. The templates are used to validate correct operation of the submitted SDK on the NIST test platform prior to the start of testing. The templates are representative of the FORMAT of the actual test data only. They are not intended to be representative of the test data in terms of number of minutiae or other characteristics. Participants shall compute the results of matching 100 pairs of templates from this set with their SDK, and return the scores to the Test Liaison (by email). If more than one SDK will be submitted, the process shown below shall be repeated for each additional SDK. STEPS ===== 1) Compute match scores for all 100 pairs of templates listed in the file "sd24pairs.lst". The format of this file is: [Probe Template Filename] [Gallery Template Filename] ------------------------------------------------------------------- **NOTE: Each score shall be produced by matching the Probe Template against the Gallery Template (in that order). ---------------------------------------------------------------...

MINEX2-YX_descending-pruned-CC/README The MINEX II Sample Data for Matching is comprised of 42 templates in ISO compact card format. These templates were created from ANSI 378 templates sorted Y-X descending. The templates are used to validate correct operation of the submitted SDK on the NIST test platform prior to the start of testing. The templates are representative of the FORMAT of the actual test data only. They are not intended to be representative of the test data in terms of number of minutiae or other characteristics. Participants shall compute the results of matching 100 pairs of templates from this set with their SDK, and return the scores to the Test Liaison (by email). If more than one SDK will be submitted, the process shown below shall be repeated for each additional SDK. STEPS ===== 1) Compute match scores for all 100 pairs of templates listed in the file "sd24pairs.lst". The format of this file is: [Probe Template Filename] [Gallery Template Filename] ------------------------------------------------------------------- **NOTE: Each score shall be produced by matching the Probe Template against the Gallery Template (in that order). --------------------------------------------------------...

IKA®RV 10 basic IKA®RV 10 digital 042009 Betriebsanleitung DE 5 Operating instructions EN 17 Mode d’emploi FR 29 Instrucciones de manejo ES 41 36 785 00 Reg.-No. 4343-01 3678500_RV10bd_032009_4sprachig_ue:Layout 1 22.07.2009 17:30 Uhr Seite 1 3042009 EG-KONFORMITÄTSERKLÄRUNG DE Wir erklären in alleiniger Verantwortung, dass dieses Produkt den Bestimmungen der Richtlinien 2006/95/EG, 98/37/EG und 2004/108/EG entspricht und mit den folgenden Normen und norminativen Dokumenten übereinstimmt: DIN EN IEC 61010-1, -2-051; DIN EN ISO 12100-1, -2; EN 60204-1 und DIN EN IEC 61326-1. CE-DECLARATION OF CONFORMITY EN We declare under our sole responsibility that this product corresponds to the regulations 2006/95/EC, 98/37/EC and 2004/108/EC and conforms with the standards or standardized documents DIN EN IEC 61010-1, -2-051; DIN EN ISO 12100-1, -2; EN 60204-1 and DIN EN IEC 61326-1. DÉCLARATION DE CONFORMITÉ CE FR Nous déclarons sous notre propre responsabilité que ce produit est conforme aux réglementations 2006/95/CE, 98/37/CE et 2004/108/CE et en conformité avec les normes ou documents normalisés suivant DIN EN IEC 61010-1, -2-051; DIN EN ISO 12100-1, -2; EN 60204-1 et DIN EN IEC 61326-1. DECLARACION DE CONFORMIDAD D...

MINEX2-XY_ascending-pruned-CC/README The MINEX II Sample Data for Matching is comprised of 42 templates in ISO compact card format. These templates were created from ANSI 378 templates sorted X-Y ascending. The templates are used to validate correct operation of the submitted SDK on the NIST test platform prior to the start of testing. The templates are representative of the FORMAT of the actual test data only. They are not intended to be representative of the test data in terms of number of minutiae or other characteristics. Participants shall compute the results of matching 100 pairs of templates from this set with their SDK, and return the scores to the Test Liaison (by email). If more than one SDK will be submitted, the process shown below shall be repeated for each additional SDK. STEPS ===== 1) Compute match scores for all 100 pairs of templates listed in the file "sd24pairs.lst". The format of this file is: [Probe Template Filename] [Gallery Template Filename] ------------------------------------------------------------------- **NOTE: Each score shall be produced by matching the Probe Template against the Gallery Template (in that order). ----------------------------------------------------------...

MINEX2-YX_ascending-pruned-CC/README The MINEX II Sample Data for Matching is comprised of 42 templates in ISO compact card format. These templates were created from ANSI 378 templates sorted Y-X ascending. The templates are used to validate correct operation of the submitted SDK on the NIST test platform prior to the start of testing. The templates are representative of the FORMAT of the actual test data only. They are not intended to be representative of the test data in terms of number of minutiae or other characteristics. Participants shall compute the results of matching 100 pairs of templates from this set with their SDK, and return the scores to the Test Liaison (by email). If more than one SDK will be submitted, the process shown below shall be repeated for each additional SDK. STEPS ===== 1) Compute match scores for all 100 pairs of templates listed in the file "sd24pairs.lst". The format of this file is: [Probe Template Filename] [Gallery Template Filename] ------------------------------------------------------------------- **NOTE: Each score shall be produced by matching the Probe Template against the Gallery Template (in that order). ----------------------------------------------------------...

DETERMINATION OF CF3J INERTING CONCENTRATION METHANE-AIR AND HEPTANE-AIR MIXTURES Yaroslav A. Lisochkin and Vladimir I. Poznyak Federal state unitary enterprise Russian scientific center APPLIED CHEMISTRY Dobrolubov Ave. 14, St. Petersburg, 197198 Russia Phone: (812) 238-92-11 E-mail: office@cisp.spb.ru Evgeniy G. Belevtcev OZON Ltd Dobrolubov Ave. 14, St. Petersburg, 197198 Russia Phone/Fax: (812) 325-13-73 E-mail: ozonkln@spb.cityline.ru One of the main indices that characterize the efficiency of the substance used for the fire-fighting agent is its minimal inerting concentration (MIC) for vapour/gas/air blends of combustible substances. A lot of published data is available on MIC for various substances considered as perspective fire-fighting agents. The scatter in the MIC values is very large. They were obtained for plants with various volumes of test vessels, various igniters and various combustible blends. There is evidence for the considerable growth of the obtained MPC values with the vessel volume and the igniter capacity [1, 2]. To obtain comparative data for the complete raw of fire-fighting agents under study we in our institute determined MIC for each vapour/air blend of n-heptane at th...

THE MECHANISM OF FIRE SUPPRESSION BY CONDENSED AEROSOLS Vladimir V. Agafonov, Sergey N. Kopylov, Andrey V. Sychev, Vassily A. Uglov, Dmitry B. Zhyganov All-Russian Scientific Research Institute for Fire Protection VNIIPO 12, Balashikha District, Moscow Region, 143903 Russia Tel: +7-095-5219747; Fax: +7-095-5214394 e-mail: firetest@mail.ru INTRODUCTION Condensed fire extinguishing aerosol represents a mixture of fine dispersed solid particles and inert gases. The aerosol can be produced by combustion of some solid fuels (aerosol- forming compounds) in special generator. Despite differences in these fuels, they contain as a rule inorganic oxidisers and salts (KNO3, KClO4, KCl) and organic or inorganic combustibles (Mg, epoxycombinations) [1]. A gaseous phase of the aerosol consists mainly from N2 and CO2, and a solid phase contains K2CO3, KHCO3, KCl [2]. In the scientific literature there are many experimental data concerning fire extinguishing density for aerosols of various chemical nature [1-4]. Usually this value varies in the range from 30 to 60 g/m3. It is obvious that fire suppression efficiency of condensed aerosols is substantially higher than for fire extinguishing powders and brominated halon...

minex2_sd4templategen/a001_03p.RAW minex2_sd4templategen/a001_04p.RAW minex2_sd4templategen/a001_05p.RAW minex2_sd4templategen/a001_06p.RAW minex2_sd4templategen/a001_07p.RAW minex2_sd4templategen/a004_05p.RAW minex2_sd4templategen/a999_01p.RAW minex2_sd4templategen/b001_04p.RAW minex2_sd4templategen/b001_06p.RAW minex2_sd4templategen/b001_08p.RAW �������﻾����﷿ﻻ��ﳿ粒ﷺ���﻾﷾﫼粒ﳹ�����﫽笠ﯻﳻ﻽﷾���﫸ﻼ���ﳿ﫹ﳼ﻽ﳿﷹ﷿ﳻ��������ﯻ﷽﻽���������﷿ﯹ��ﳽﳼﳼ﷼���﷿﫺ﻼ�﷿ﯻﻻ���ﯺ﷼��﻾��ﳼ�����﷾﷽ﳽ���ﯻﳻ﻽﻾��﷿﫺ﷻ�ﳽﯻ������﻾﻾﻾﻾﻾﻾﻾�����������﷽﻽﻾﷽�����������������ﳾﯺ﫼﫹ﷻ������ﯽﷹ��﷿炙ﯹ��﷿���﻾�ﳿ狀﫹��﷿﫹炙ﳸ�������������ﳻ��﻽������﷾﻽��﷾��������﷽��������﻾�����﻽�﻾﻾��﷾�...

Dynamic mechanical analysis/Hysol 9309 1.001 CLOSED VERSION 2.0 Language English Run 1 RunSerial 2649 Instrument DMA Q800 V20.16 Build 35 Module DMA Multi-Frequency - Strain Operator MS File \\Ta-workstation\ta\Data\DMA\Silton\Hysol 9309 1.001 ProcName InstSerial 0800-0958 Clamp Single Cantilever Sample Hysol 9309-1 Geometry Rectangular (Length, Width, Thickness) GeomFactor 31.4784 1/mm 0.0211 1/mm 0.6648 1/mm² Size 17.3300 12.4133 2.5100 mm SampParams 0.3500 Method Comment Xcomment Air Bearing Gas: Air Text FreqTab 1.00, Multiplex None InstCalDate Electronics: 2015-05-08 08:40:59 0.0001 InstCalDate Force: 2015-05-08 09:19:34 0.0096 Enabled InstCalDate Dynamic: 2015-05-08 13:07:48 0.0156 Enabled InstCalDate Clamp Date: 2015-05-28 13:42:24 InstCalDate Clamp Mass: 29.2 gm InstCalDate Clamp Offset: 0.00 mm InstCalDate Clamp Compliance: 0.721 um/N TempCal 0 pts Settings OscStrain 0.0200 MinOscF 0.0000 StabCyc 4 AvgCyc 3 StoreStable AutoZero LengthFixed Controls Gas 1 Event Off Sampling 1.0 AutoAnalysis Off MacroFile Nsig 17 Sig1 Time (min) Sig2 Temperature (°C) Sig3 Storage Modulus (MPa) Sig4 Loss Modulus (MPa) Sig5 Stress (MPa) Sig6 Tan Delta ...