Test v6LC.2.2.23 - Processing Router Advertisment with Route Information Option (Hosts Only)
Part J - Route Information Option with a Prefix Length of 0 and Lifetime set to 0
Verify that the HUT uses a Route Information Options to choose the next-hop.
* [RFC-4191] - Section 3.1
* Packet generator
* Monitor to capture packets
No Common Test Setup is performed. The Common Test Cleanup procedure is
performed after each part.
Router Advertisement C
IPv6 Header
Next Header: 58
Source Address: TR1's Link Local Address
Destination Address:Multicast Address
|
Router Advertisement
Router Preference: [See Below]
|
|
Source Link-layer Address Option
|
|
Route Information Option
Prefix Length: [See Below]
PRF: [See Below]
Route Lifetime: [See Below]
Prefix: 3ffe:501:ffff:102::
|
|
Router Advertisement B
IPv6 Header
Next Header: 58
Source Address: TR2's Link Local Address
Destination Address:Multicast Address
|
Router Advertisement
Router Preference: [See Below]
|
|
Source Link-layer Address Option
|
|
Route Information Option
Prefix Length: [See Below]
PRF: [See Below]
Route Lifetime: [See Below]
Prefix: 3ffe:501:ffff:102::
|
|
Packet A
IPv6 Header
Next Header: 58
Source Address: TN2's Global Address
Destination Address: HUT's Global Address
|
|
ICMPv6 Echo Request
|
Part J
32. TR1 transmits a Router Advertisement C with no Route Information Option
33. TR2 advertises Router Advertisement B with Route Information Option with the following information:
Length: 1
Prefix Length: 0
PRF: high
Lifetime: 600 seconds
Prefix: ::
34. TR1 forwards an Echo Request from TN2 to the NUT.
35. TR2 advertises Router Advertisement B with Route Information Option with the following information:
Length: 1
Prefix Length: 0
PRF: High
Lifetime: 0 seconds
Prefix: ::
36. TR1 forwards an Echo Request from TN2 to the NUT.
Steps 34:
The NUT should respond to the Echo Request with an Echo Reply with a next-hop of TR2.
Steps 36:
The NUT should respond to the Echo Request with an Echo Reply with a next-hop of TR1.
* None.