NAME

  Test v6LC.2.1.3 - Prefix Information Option Processing, On-link Flag (Hosts Only)


Purpose

   Verify that a host properly processes the on-link flag of a Prefix Information Option.


References

  * [ND]  Section 6.3.4


Resource Requirements

  * Packet generator
  * Monitor to capture packets


Test Setup

  No Common Test Setup is performed. Wait at least 3 seconds
  (MAX_MULTICAST_SOLICIT * RETRANS_TIMER) after any previous cleanup to make sure all
  previous NCE's are in state No NCE. The Common Test Cleanup procedure is performed.
Router Advertisement A
IPv6 Header
Next Header: 58
Source Address: TR1's Link-local Address
Destination Address:
All-nodes Multicast Address
Router Advertisement
Router Lifetime: 100 seconds
Reachable Time: 10 seconds
Retransmit Interval: 1 second
Prefix Option
"on-link" (L) flag: 1
Valid Lifetime: 20 seconds
Preferred Lifetime: 20 seconds
Prefix: TR1's Global Prefix

Neighbor Advertisement C
IPv6 Header
Next Header: 58
Source Address: TR1's Global Address
Destination Address: HUT's Link-local Address
ICMPv6 Echo Request


Procedure

  1. TR1 transmits Router Advertisement A.
  2. TR1 transmits Packet A. TR1 should not respond to Neighbor Solicitations from the HUT.
  3. Observe the packets transmitted by the HUT.
  4. TR1 transmits Router Advertisement A with the on-link (L) flag clear.
  5. TR1 transmits Packet A. TR1 should not respond to Neighbor Solicitations from the HUT.
  6. Observe the packets transmitted by the HUT.


Observable Results

  Step 3: 
  In response to Packet A, the HUT should transmit 3 Neighbor Solicitations with a Target
  Address of TR1's global address.
  Step 6: 
  In response to Packet A, the HUT should transmit 3 Neighbor Solicitations with a Target
  Address of TR1's global address.


Possible Problems

  * None.