Test Information

TitlePart I: USGv6 1.5.A
CommandLine./usg15a.seq -pkt ./usg15a.def -log 10.html -ti Part I: USGv6 1.5.A
TestVersionV6LC_5_0_7
ToolVersionREL_3_3_5
Start2021/12/24 17:47:26
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./usg15a.def
Systemmanual
TargetNameUbuntu 20.04.2
HostNamehost
Typehost

Test Sequence Execution Log

17:47:26Start
17:47:26Start Capturing Packets (Link0)

--- start Common Test Setup 1.1 for Host
17:47:26 vSend(Link0,setup_echo_request)
Send Echo Request (Link-Local)
17:47:26 vRecv(Link0,setup_echo_reply ns_l2l ns_g2l) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Link-Local to Link-Local)
17:47:26 vSend(Link0,na_l2l)
Send Neighbor Advertisement (Link-Local to Link-Local)
17:47:26 vRecv(Link0,setup_echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Link-Local)

OK
17:47:26 vSend(Link0,setup_ra)
Send Router Advertisement
17:47:26 vRecv(Link0,setup_dadns) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 17:47:26
recv unexpect packet at 17:47:28
recv unexpect packet at 17:47:28
recv unexpect packet at 17:47:29
vRecv() return status=1
17:47:31 Wait 5 second
17:47:36 vSend(Link0,setup_echo_request_g)
Send Echo Request (Global)
17:47:36 vRecv(Link0,setup_echo_reply_g ns_g2g ns_l2g) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 17:47:33
Recv Neighbor Solicitation (Global to Global)
17:47:36 vSend(Link0,na_g2g)
Send Neighbor Advertisement (Global to Global)
17:47:36 vRecv(Link0,setup_echo_reply_g) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Global)

OK
17:47:36Clear Captured Packets (Link0)

--- end Common Test Setup 1.1 for Host
17:47:36 vSend(Link0,setup_rausg)
Send RA

Remote Echo Requests of NUT. 
17:47:36 vRemote(ping6.rmt) ``/usr/local/v6eval//bin/manual//ping6.rmt -t manual -u cnlabs -p cnlabs123 -d 3ffe:501:ffff:180:20c:29ff:fe8c:145e -o 1 if=ens192 addr='fec0::200:ff:fe00:100'''
Bareword found where operator expected at (eval 15) line 1, near "20c"
	(Missing operator before c?)
Bareword found where operator expected at (eval 15) line 1, near "29ff"
	(Missing operator before ff?)
Bareword found where operator expected at (eval 15) line 1, near "145e"
	(Missing operator before e?)

lio_start
ping6> Press enter key, and excute the following commands within 5 seconds.
ping6> Do ``ping6  DataSize= 2, Send Count= 1, Interface= ens192, Destination= fec0::200:ff:fe00:100''
ping6> For USGv6 1.2.C test execute ping command in DUT then immediately press enter here.
lio_stop
17:47:59 vSend(Link0,na_slocal)
Send NA
17:47:59 vRecv(Link0,u_ns_g2l_wo ns_l2l u_ns_l2l_wo u_ns_g2l u_ns_l2g_wo ns_g2g ns_g2l u_ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_l2g ns_l2g echo_request64) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 17:47:36
recv unexpect packet at 17:47:37
recv unexpect packet at 17:47:41
recv unexpect packet at 17:47:53
recv unexpect packet at 17:47:54
recv unexpect packet at 17:47:58
recv unexpect packet at 17:47:59
Send Echo Request (Packet size is 64)

TN can receive ICMPv6 echo request from NUT
OK
Target: Reboot
17:47:59 vRemote(reboot.rmt) ``/usr/local/v6eval//bin/manual//reboot.rmt -t manual -u cnlabs -p cnlabs123 -d 3ffe:501:ffff:180:20c:29ff:fe8c:145e -o 1 timeout=300''
Bareword found where operator expected at (eval 15) line 1, near "20c"
	(Missing operator before c?)
Bareword found where operator expected at (eval 15) line 1, near "29ff"
	(Missing operator before ff?)
Bareword found where operator expected at (eval 15) line 1, near "145e"
	(Missing operator before e?)

reboot> 
lio_start
reboot> Reboot NUT.
reboot>     * Wait until NUT boot up completely.
reboot>         Ex.) Wait until catch up login prompt.
reboot> 
reboot> Press Enter key for continue. 
lio_stop
reboot> 

17:48:01Stop Capturing Packets (Link0)
17:48:01End

Packet Reverse Log