Test Information

TitleUSGv6 1.2.D
CommandLine./usg12d.seq -pkt ./usg12d.def -log 4.html -ti USGv6 1.2.D
TestVersionV6LC_5_0_7
ToolVersionREL_3_3_5
Start2021/12/24 10:15:05
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./usg12d.def
Systemmanual
TargetNameUbuntu 20.04.2
HostNamehost
Typehost

Test Sequence Execution Log

10:15:05Start

Initialization
Enable DUT to use temporary address then press enter also change it back to default after the test
10:15:12Start Capturing Packets (Link0)

Setup
10:15:12 vSend(Link0,echo_request_link_local)
Send Echo Request (Link-local address)
10:15:12 vRecv(Link0,echo_reply_link_local ns_local ns_local_sll) timeout:5 cntLimit:0 seektime:0
Receive Neighbor Solicitation
10:15:12 vSend(Link0,na_local)
Send Neighbor Advertisement
10:15:12 vRecv(Link0,echo_reply_link_local) timeout:5 cntLimit:0 seektime:0
Receive Echo Reply (Link-local address)

TN created the entry of TN's link-local address to Neighbor cache of NUT.
10:15:12 vSend(Link0,ra_start)
Send Router Advertisement
10:15:12 Wait 5 second
10:15:17Clear Captured Packets (Link0)
10:15:17 vSend(Link0,echo_request_global)
Send Echo Request (Global address)
10:15:17 vRecv(Link0,echo_reply_global ns_global ns_global_sll ns_global_from_local ns_global_sll_from_local ns_local ns_local_sll) timeout:5 cntLimit:0 seektime:0
Receive Neighbor Solicitation
10:15:17 vSend(Link0,na_global)
Send Neighbor Advertisement
10:15:17 vRecv(Link0,echo_reply_global) timeout:5 cntLimit:0 seektime:0
Receive Echo Reply (Global address)

TN created the entry of TN's global address to Neighbor cache of NUT.
Test
Remote Echo Requests of NUT. 
10:15:17 vRemote(ping6.rmt) ``/usr/local/v6eval//bin/manual//ping6.rmt -t manual -u cnlabs -p cnlabs123 -d 3ffe:501:ffff:180:20c:29ff:fe8c:145e -o 1 if=ens192 addr='2001:2:0:1110::1'''
Bareword found where operator expected at (eval 15) line 1, near "20c"
	(Missing operator before c?)
Bareword found where operator expected at (eval 15) line 1, near "29ff"
	(Missing operator before ff?)
Bareword found where operator expected at (eval 15) line 1, near "145e"
	(Missing operator before e?)

lio_start
ping6> Press enter key, and excute the following commands within 5 seconds.
ping6> Do ``ping6  DataSize= 2, Send Count= 1, Interface= ens192, Destination= 2001:2:0:1110::1''
ping6> For USGv6 1.2.C test execute ping command in DUT then immediately press enter here.
lio_stop
10:15:22 vRecv(Link0,echo_request_link_local_nut echo_request_temporary ns_local ns_local_sll ns_global ns_global_sll) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 10:15:22
recv echo_request_temporary

TN can receive ICMPv6 echo request from NUT
OK
Cleanup
10:15:24 vSend(Link0,clean_na_global)
send clean_na_global
10:15:24 vSend(Link0,echo_request_global)
Send Echo Request (Global address)
10:15:24 vRecv(Link0,clean_echo_reply_global) timeout:5 cntLimit:0 seektime:0
recv clean_echo_reply_global
10:15:24 Wait 10 second
10:15:34 vRecv(Link0,clean_ns_global_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_global_sll
10:15:34 vRecv(Link0,clean_ns_global_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_global_sll
10:15:34 vRecv(Link0,clean_ns_global_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_global_sll
10:15:34Clear Captured Packets (Link0)
10:15:34 vSend(Link0,ra_end)
Send Router Advertisement
10:15:34 Wait 5 second
10:15:39Clear Captured Packets (Link0)
10:15:39 vSend(Link0,clean_na_local)
send clean_na_local
10:15:39 vSend(Link0,echo_request_link_local)
Send Echo Request (Link-local address)
10:15:39 vRecv(Link0,clean_echo_reply_link_local) timeout:5 cntLimit:0 seektime:0
recv clean_echo_reply_link_local
10:15:39 Wait 10 second
10:15:49 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
10:15:49 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
10:15:49 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
10:15:49Clear Captured Packets (Link0)
10:15:49Stop Capturing Packets (Link0)
10:15:49End

Packet Reverse Log