Test Information

TitleUSGv6 1.2.C
CommandLine./usg12c.seq -pkt ./usg12c.def -log 3.html -ti USGv6 1.2.C
TestVersionV6LC_5_0_7
ToolVersionREL_3_3_5
Start2022/01/07 11:54:48
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./usg12c.def
Systemmanual
TargetNameUbuntu 20.04.2
HostNametahi-tool
Typehost

Test Sequence Execution Log

11:54:48Start

Initialization
11:54:48Start Capturing Packets (Link0)

Setup
11:54:48 vSend(Link0,echo_request_link_local)
Send Echo Request (Link-local address)
11:54:48 vRecv(Link0,echo_reply_link_local ns_local ns_local_sll) timeout:5 cntLimit:0 seektime:0
Receive Neighbor Solicitation
11:54:48 vSend(Link0,na_local)
Send Neighbor Advertisement
11:54:48 vRecv(Link0,echo_reply_link_local) timeout:5 cntLimit:0 seektime:0
Receive Echo Reply (Link-local address)

TN created the entry of TN's link-local address to Neighbor cache of NUT.
11:54:48 vSend(Link0,ra_start)
Send Router Advertisement
11:54:48 Wait 5 second
11:54:53Clear Captured Packets (Link0)
11:54:53 vSend(Link0,echo_request_global)
Send Echo Request (Global address)
11:54:53 vRecv(Link0,echo_reply_global ns_global ns_global_sll ns_global_from_local ns_global_sll_from_local ns_local ns_local_sll) timeout:5 cntLimit:0 seektime:0
Receive Neighbor Solicitation
11:54:53 vSend(Link0,na_global)
Send Neighbor Advertisement
11:54:53 vRecv(Link0,echo_reply_global) timeout:5 cntLimit:0 seektime:0
Receive Echo Reply (Global address)

TN created the entry of TN's global address to Neighbor cache of NUT.
Test
Remote Echo Requests of NUT. 
11:54:54 vRemote(ping6.rmt) ``/usr/local/v6eval//bin/manual//ping6.rmt -t manual -u cnlabs -p cnlabs123 -d 3ffe:501:ffff:180:20c:29ff:fe8c:145e -o 1 if=ens192 addr='2001:2:0:1000::1'''
Bareword found where operator expected at (eval 15) line 1, near "20c"
	(Missing operator before c?)
Bareword found where operator expected at (eval 15) line 1, near "29ff"
	(Missing operator before ff?)
Bareword found where operator expected at (eval 15) line 1, near "145e"
	(Missing operator before e?)

lio_start
ping6> Press enter key, and excute the following commands within 5 seconds.
ping6> Do ``ping6  DataSize= 2, Send Count= 1, Interface= ens192, Destination= 2001:2:0:1000::1''
ping6> For USGv6 1.2.C test execute ping command in DUT then immediately press enter here.
lio_stop
11:54:58 vSend(Link0,na_globalusg)
Send NA
11:54:58 vRecv(Link0,echo_request_link_local_nut ns_local ns_local_sll ns_global ns_global_sll) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 11:54:56
Receive Echo Request (Link-local address)

TN can receive ICMPv6 echo request from NUT
OK
Cleanup
11:54:58 vSend(Link0,clean_na_global)
send clean_na_global
11:54:58 vSend(Link0,echo_request_global)
Send Echo Request (Global address)
11:54:58 vRecv(Link0,clean_echo_reply_global) timeout:5 cntLimit:0 seektime:0
recv clean_echo_reply_global
11:54:58 Wait 10 second
11:55:08 vRecv(Link0,clean_ns_global_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_global_sll
11:55:08 vRecv(Link0,clean_ns_global_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_global_sll
11:55:08 vRecv(Link0,clean_ns_global_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_global_sll
11:55:08Clear Captured Packets (Link0)
11:55:08 vSend(Link0,ra_end)
Send Router Advertisement
11:55:08 Wait 5 second
11:55:13Clear Captured Packets (Link0)
11:55:13 vSend(Link0,clean_na_local)
send clean_na_local
11:55:13 vSend(Link0,echo_request_link_local)
Send Echo Request (Link-local address)
11:55:13 vRecv(Link0,clean_echo_reply_link_local) timeout:5 cntLimit:0 seektime:0
recv clean_echo_reply_link_local
11:55:13 Wait 10 second
11:55:23 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
11:55:23 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
11:55:23 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
11:55:23Clear Captured Packets (Link0)
11:55:23Stop Capturing Packets (Link0)
11:55:23End

Packet Reverse Log