Test Information

TitlePart A: Destination Options (Global)
CommandLine./v6LC_1_3_6_C.seq -pkt ./v6LC_1_3_6_C.def -log 94.html -ti Part A: Destination Options (Global)
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 07:23:36
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./v6LC_1_3_6_C.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

07:23:36Start
07:23:36Start Capturing Packets (Link0)

--- start Common Test Setup 1.1 for Router
07:23:36 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
07:23:36Clear Captured Packets (Link0)
07:23:36 vSend(Link0,setup_echo_request)
Send Echo Request (Link-Local) to Link0
07:23:36 vRecv(Link0,setup_echo_reply ns_l2l ns_g2l) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Link-Local to Link-Local) from Link0
07:23:36 vSend(Link0,na_l2l)
Send Neighbor Advertisement (Link-Local to Link-Local) to Link0
07:23:36 vRecv(Link0,setup_echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Link-Local) from Link0
07:23:36Clear Captured Packets (Link0)

--- end Common Test Setup 1.1 for Router
OK
07:23:36 vSend(Link0,echo_request_1st)
Send Echo Request with Destination Ext Hdr (1st fragment)
07:23:37 vSend(Link0,echo_request_2nd)
Send Echo Request with ICMPv6 HDr(2nd fragment)
07:23:37 vRecv(Link0,u_ns_g2l_wo ns_l2l u_ns_l2l_wo u_ns_g2l u_ns_l2g_wo ns_g2g ns_g2l u_ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_l2g ns_l2g icmperr) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Global to Global)
07:23:37 vSend(Link0,na_g2g)
Send Neighbor Advertisement (Global to Global)
07:23:37 vRecv(Link0,u_ns_g2l_wo ns_l2l u_ns_l2l_wo u_ns_g2l u_ns_l2g_wo ns_g2g ns_g2l u_ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_l2g ns_l2g icmperr) timeout:5 cntLimit:0 seektime:0
recv icmperr

OK
--- Cleanup RUT
07:23:37Clear Captured Packets (Link0)
07:23:37 vSend(Link0,cleanup_na)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link0
07:23:37 vSend(Link0,cleanup_echo_request)
Send Echo Request to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
07:23:37 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 07:23:37
recv a packet at 07:23:42
recv a packet at 07:23:43
recv a packet at 07:23:44
vRecv() return status=1
07:23:47 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
07:23:47Stop Capturing Packets (Link0)
07:23:47End

Packet Reverse Log