Test Information

TitlePart G: Duplicate Fragments (Global)
CommandLine./Reassembly_Dupli_G.seq -pkt ./Reassembly_Dupli_G.def -log 90.html -ti Part G: Duplicate Fragments (Global)
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 07:21:42
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./Reassembly_Dupli_G.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

07:21:42Start
07:21:43Start Capturing Packets (Link0)

--- start Common Test Setup 1.1 for Router
07:21:43 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
07:21:43Clear Captured Packets (Link0)
07:21:43 vSend(Link0,setup_echo_request)
Send Echo Request (Link-Local) to Link0
07:21:43 vRecv(Link0,setup_echo_reply ns_l2l ns_g2l) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Link-Local to Link-Local) from Link0
07:21:43 vSend(Link0,na_l2l)
Send Neighbor Advertisement (Link-Local to Link-Local) to Link0
07:21:43 vRecv(Link0,setup_echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Link-Local) from Link0
07:21:43Clear Captured Packets (Link0)

--- end Common Test Setup 1.1 for Router
OK
07:21:43 vSend(Link0,echo_request_1st)
Send Echo Request (1st fragment)
07:21:43 vSend(Link0,echo_request_1st)
Send Echo Request (1st fragment)
07:21:43 vSend(Link0,echo_request_2nd)
Send Echo Request (2nd fragment)
07:21:43 vSend(Link0,echo_request_3rd)
Send Echo Request (3rd fragment)
07:21:43 vRecv(Link0,u_ns_g2l_wo ns_l2l u_ns_l2l_wo u_ns_g2l u_ns_l2g_wo ns_g2g ns_g2l u_ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_l2g ns_l2g echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply

OK
--- Cleanup RUT
07:21:43Clear Captured Packets (Link0)
07:21:43 vSend(Link0,cleanup_na)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link0
07:21:43 vSend(Link0,cleanup_echo_request)
Send Echo Request to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
07:21:43 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 07:21:43
recv a packet at 07:21:48
recv a packet at 07:21:48
recv a packet at 07:21:49
recv a packet at 07:21:49
recv a packet at 07:21:50
recv a packet at 07:21:50
vRecv() return status=1
07:21:53 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
07:21:53Stop Capturing Packets (Link0)
07:21:53End

Packet Reverse Log