Test Information

TitlePart E: Time Exceeded, Only Second Fragment Received
CommandLine./F_TX_only2nd.seq -pkt ./F_TX_only2nd.def -log 80.html -ti Part E: Time Exceeded, Only Second Fragment Received
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 07:11:10
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./F_TX_only2nd.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

07:11:10Start
07:11:10Start Capturing Packets (Link0)

--- start Common Test Setup 1.1 for Router
07:11:11 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::200:ff:fe00:a0a0 if=ens192''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::200:ff:fe00:a0a0
route> interface        = ens192

route> then press enter key.
lio_stop
07:11:17 vSend(Link0,setup_echo_request_tr1)
Send Echo Request From TR1
07:11:17 vRecv(Link0,setup_echo_reply_tr1 ns_l2l_tr1 ns_g2l_tr1) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (link-local to link-local)
07:11:17 vSend(Link0,na_l2l_tr1)
Send Neighbor Advertisement (link-local to link-local)
07:11:17 vRecv(Link0,setup_echo_reply_tr1) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply

OK
07:11:17 Wait 5 second
07:11:22Clear Captured Packets (Link0)

--- end Common Test Setup 1.1
07:11:22 vSend(Link0,echo_request_2nd)
Send Echo Request (2nd fragment)

waiting 65 sec.
07:11:22 vRecv(Link0,time_exceeded_123 echo_reply ns_g2g ns_g2l ns_l2g ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_g2l u_ns_g2l_wo u_ns_l2g u_ns_l2g_wo u_ns_l2l u_ns_l2l_wo) timeout:65 cntLimit:0 seektime:0
recv unexpect packet at 07:11:45
vRecv() return status=1

OK
--- Cleanup NUT
07:12:27 vSend(Link0,cleanup_na_g)
Send Neighbor Advertisement (Global address with Different Link-layer Address)
07:12:27 vSend(Link0,cleanup_echo_request_g)
Send Echo Request (Global)

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
07:12:27 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 07:12:27
recv a packet at 07:12:28
recv a packet at 07:12:29
vRecv() return status=1
07:12:37 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::200:ff:fe00:a0a0 if=ens192''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::200:ff:fe00:a0a0
route> interface        = ens192

route> then press enter key.
lio_stop
07:12:39 vSend(Link0,cleanup_na_tr1)
Send Neighbor Advertisement (cleanup)
07:12:39 vSend(Link0,cleanup_echo_request_tr1)
Send Echo Request From TR1 (cleanup)

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
07:12:39 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 07:12:39
recv a packet at 07:12:44
recv a packet at 07:12:45
recv a packet at 07:12:46
vRecv() return status=1
07:12:49Stop Capturing Packets (Link0)
07:12:49End

Packet Reverse Log