Test Information

TitlePart D: Time Exceeded (Link-local), Only First Fragment Received
CommandLine./v6LC_1_3_2_D.seq -pkt ./v6LC_1_3_2_D.def -log 79.html -ti Part D: Time Exceeded (Link-local), Only First Fragment Received
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 07:09:24
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./v6LC_1_3_2_D.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

07:09:24Start
07:09:24Start Capturing Packets (Link0)

--- start Common Test Setup 1.1 for Router
07:09:24 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::200:ff:fe00:a0a0 if=ens192''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::200:ff:fe00:a0a0
route> interface        = ens192

route> then press enter key.
lio_stop
07:09:29 vSend(Link0,setup_echo_request_tr1)
Send Echo Request From TR1
07:09:29 vRecv(Link0,setup_echo_reply_tr1 ns_l2l_tr1 ns_g2l_tr1) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (link-local to link-local)
07:09:29 vSend(Link0,na_l2l_tr1)
Send Neighbor Advertisement (link-local to link-local)
07:09:29 vRecv(Link0,setup_echo_reply_tr1) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply

OK
07:09:29 Wait 5 second
07:09:34Clear Captured Packets (Link0)

--- end Common Test Setup 1.1
07:09:34 vSend(Link0,echo_request_1st)
Send Echo Request (1st fragment)

waiting 65 sec.
07:09:34 vRecv(Link0,time_exceeded_1st ns_g2g ns_g2l ns_l2g ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_g2l u_ns_g2l_wo u_ns_l2g u_ns_l2g_wo u_ns_l2l u_ns_l2l_wo) timeout:65 cntLimit:0 seektime:0
recv unexpect packet at 07:09:37
Recv Neighbor Solicitation (Link-Local to Link-Local)
07:10:38 vSend(Link0,na_l2l)
Send Neighbor Advertisement (Link-Local to Link-Local)

waiting 1 sec.
07:10:38 vRecv(Link0,time_exceeded_1st ns_g2g ns_g2l ns_l2g ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_g2l u_ns_g2l_wo u_ns_l2g u_ns_l2g_wo u_ns_l2l u_ns_l2l_wo) timeout:1 cntLimit:0 seektime:0
Recv ICMPv6 Time Exceeded (1st fragment)

OK
--- Cleanup NUT
07:10:38 vSend(Link0,cleanup_na)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address)
07:10:38 vSend(Link0,cleanup_echo_request)
Send Echo Request

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
07:10:38 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 07:10:38
recv a packet at 07:10:41
recv a packet at 07:10:43
recv a packet at 07:10:44
recv a packet at 07:10:45
vRecv() return status=1
07:10:48 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::200:ff:fe00:a0a0 if=ens192''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::200:ff:fe00:a0a0
route> interface        = ens192

route> then press enter key.
lio_stop
07:10:59 vSend(Link0,cleanup_na_tr1)
Send Neighbor Advertisement (cleanup)
07:10:59 vSend(Link0,cleanup_echo_request_tr1)
Send Echo Request From TR1 (cleanup)

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
07:10:59 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 07:10:59
recv a packet at 07:11:04
recv a packet at 07:11:05
recv a packet at 07:11:06
vRecv() return status=1
07:11:09Stop Capturing Packets (Link0)
07:11:09End

Packet Reverse Log