Test Information

TitlePart A: Time Elapsed Between Fragments less than Sixty Seconds
CommandLine./F_TX_intime.seq -pkt ./F_TX_intime.def -log 76.html -ti Part A: Time Elapsed Between Fragments less than Sixty Seconds
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 07:03:47
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./F_TX_intime.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

07:03:47Start
07:03:47Start Capturing Packets (Link0)

--- start Common Test Setup 1.1 for Router
07:03:47 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::200:ff:fe00:a0a0 if=ens192''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::200:ff:fe00:a0a0
route> interface        = ens192

route> then press enter key.
lio_stop
07:04:24 vSend(Link0,setup_echo_request_tr1)
Send Echo Request From TR1
07:04:24 vRecv(Link0,setup_echo_reply_tr1 ns_l2l_tr1 ns_g2l_tr1) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 07:04:19
Recv Neighbor Solicitation (link-local to link-local)
07:04:24 vSend(Link0,na_l2l_tr1)
Send Neighbor Advertisement (link-local to link-local)
07:04:24 vRecv(Link0,setup_echo_reply_tr1) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply

OK
07:04:24 Wait 5 second
07:04:29Clear Captured Packets (Link0)

--- end Common Test Setup 1.1
07:04:29 vSend(Link0,echo_request_1st)
Send Echo Request (1st fragment)

waiting 55 sec.
07:04:29 vRecv(Link0,time_exceeded_1st ns_g2g ns_g2l ns_l2g ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_g2l u_ns_g2l_wo u_ns_l2g u_ns_l2g_wo u_ns_l2l u_ns_l2l_wo) timeout:55 cntLimit:0 seektime:0
recv unexpect packet at 07:05:23
vRecv() return status=1
07:05:24 vSend(Link0,echo_request_2nd)
Send Echo Request (2nd fragment)
07:05:24 vSend(Link0,echo_request_3rd)
Send Echo Request (3rd fragment)
07:05:24 vRecv(Link0,u_ns_g2l_wo ns_l2l u_ns_l2l_wo u_ns_g2l u_ns_l2g_wo ns_g2g ns_g2l u_ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_l2g ns_l2g echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Global to Global)
07:05:24 vSend(Link0,na_g2g)
Send Neighbor Advertisement (Global to Global)
07:05:24 vRecv(Link0,u_ns_g2l_wo ns_l2l u_ns_l2l_wo u_ns_g2l u_ns_l2g_wo ns_g2g ns_g2l u_ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_l2g ns_l2g echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply

OK
--- Cleanup NUT
07:05:24 vSend(Link0,cleanup_na_g)
Send Neighbor Advertisement (Global address with Different Link-layer Address)
07:05:24 vSend(Link0,cleanup_echo_request_g)
Send Echo Request (Global)

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
07:05:24 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 07:05:24
recv a packet at 07:05:29
recv a packet at 07:05:31
recv a packet at 07:05:32
vRecv() return status=1
07:05:34 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::200:ff:fe00:a0a0 if=ens192''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::200:ff:fe00:a0a0
route> interface        = ens192

route> then press enter key.
lio_stop
07:05:48 vSend(Link0,cleanup_na_tr1)
Send Neighbor Advertisement (cleanup)
07:05:48 vSend(Link0,cleanup_echo_request_tr1)
Send Echo Request From TR1 (cleanup)

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
07:05:48 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 07:05:48
recv a packet at 07:05:54
recv a packet at 07:05:55
recv a packet at 07:05:56
vRecv() return status=1
07:05:58Stop Capturing Packets (Link0)
07:05:58End

Packet Reverse Log