Test Information

TitlePart E: Destination Address Differ Between Fragments
CommandLine./F_Reassembly_dst.seq -pkt ./F_Reassembly_dst.def -log 74.html -ti Part E: Destination Address Differ Between Fragments
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 07:02:05
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./F_Reassembly_dst.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

07:02:05Start
07:02:05Start Capturing Packets (Link0)

--- start Common Test Setup 1.1 for Router
07:02:05 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
07:02:09Clear Captured Packets (Link0)
07:02:09 vSend(Link0,setup_echo_request)
Send Echo Request (Link-Local) to Link0
07:02:09 vRecv(Link0,setup_echo_reply ns_l2l ns_g2l) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Link-Local to Link-Local) from Link0
07:02:09 vSend(Link0,na_l2l)
Send Neighbor Advertisement (Link-Local to Link-Local) to Link0
07:02:09 vRecv(Link0,setup_echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Link-Local) from Link0
07:02:09Clear Captured Packets (Link0)

--- end Common Test Setup 1.1 for Router
OK
07:02:09 vSend(Link0,echo_request_1st)
Send Echo Request (1st fragment, dst = NUT-LLA)
07:02:09 vSend(Link0,echo_request_2nd_dadr)
Send Echo Request (2nd fragment, dst = NUT-GA)
07:02:09 vSend(Link0,echo_request_3rd)
Send Echo Request (3rd fragment, dst = NUT-LLA)

waiting 65 sec.
07:02:09 vRecv(Link0,time_exceeded_1st echo_reply ns_g2g ns_g2l ns_l2g ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_g2l u_ns_g2l_wo u_ns_l2g u_ns_l2g_wo u_ns_l2l u_ns_l2l_wo) timeout:65 cntLimit:0 seektime:0
recv unexpect packet at 07:02:12
Recv ICMPv6 Time Exceeded Message (1st fragment)

OK
--- Cleanup RUT
07:03:11Clear Captured Packets (Link0)
07:03:11 vSend(Link0,cleanup_na)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link0
07:03:11 vSend(Link0,cleanup_echo_request)
Send Echo Request to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
07:03:11 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 07:03:11
recv a packet at 07:03:16
recv a packet at 07:03:16
recv a packet at 07:03:17
recv a packet at 07:03:18
vRecv() return status=1
07:03:21 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
07:03:24Stop Capturing Packets (Link0)
07:03:24End

Packet Reverse Log