Test Information

TitlePart J: Request sent to Multicast address (Reserved Value = 0)
CommandLine./v6LC_1_1_10_J.seq -pkt ./v6LC_1_1_10_J.def -log 25.html -ti Part J: Request sent to Multicast address (Reserved Value = 0)
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 06:34:25
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./v6LC_1_1_10_J.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

06:34:25Start
06:34:25Start Capturing Packets (Link0)
06:34:25Start Capturing Packets (Link1)

--- start Common Test Setup 1.1 for Router
06:34:25 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
06:34:26Clear Captured Packets (Link0)
06:34:26 vSend(Link0,setup_echo_request)
Send Echo Request (Link-Local) to Link0
06:34:26 vRecv(Link0,setup_echo_reply ns_l2l ns_g2l) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Link-Local to Link-Local) from Link0
06:34:26 vSend(Link0,na_l2l)
Send Neighbor Advertisement (Link-Local to Link-Local) to Link0
06:34:26 vRecv(Link0,setup_echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Link-Local) from Link0
06:34:26Clear Captured Packets (Link0)

--- end Common Test Setup 1.1 for Router
OK
06:34:26 vRemote(pim6dd.rmt) ``/usr/local/v6eval//bin/manual//pim6dd.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 usePim6dd=start ''
cuad0: hostname nor servname provided, or not known
``telnet -l cuad0'' was killed with SIGCHLD.
06:34:26 vSend(Link1,mld_report_to_link1)
send mld_report_to_link1
06:34:26 Wait 3 second
06:34:29Clear Captured Packets (Link0)
06:34:29Clear Captured Packets (Link1)
06:34:29 vSend(Link0,echo_request_ex_to_link0)
Send Echo Request to link0
06:34:29 vRecv(Link1,echo_request_ex_from_link1 ns_g2g_link1 ns_g2l_link1 ns_l2g_link1 ns_l2l u_ns_g2g_link1 u_ns_g2g_wo_link1 u_ns_g2l_link1 u_ns_g2l_wo_link1 u_ns_l2g_link1 u_ns_l2g_wo_link1 u_ns_l2l u_ns_l2l_wo) timeout:5 cntLimit:0 seektime:0
vRecv() return status=1

OK
--- Cleanup RUT
06:34:34Clear Captured Packets (Link0)
06:34:34 vSend(Link0,cleanup_na)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link0
06:34:34 vSend(Link0,cleanup_echo_request)
Send Echo Request to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:34:34 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:34:34
recv a packet at 06:34:40
recv a packet at 06:34:41
recv a packet at 06:34:42
vRecv() return status=1
06:34:44 vSend(Link0,cleanup_na_g)
Send Neighbor Advertisement (Global address with Different Link-layer Address) to Link0
06:34:44 vSend(Link0,cleanup_echo_request_g)
Send Echo Request (Global) to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:34:44 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:34:44
recv a packet at 06:34:45
recv a packet at 06:34:47
vRecv() return status=1
06:34:54Clear Captured Packets (Link1)
06:34:54 vSend(Link1,cleanup_na_1)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link1
06:34:54 vSend(Link1,cleanup_echo_request_1)
Send Echo Request to Link1

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:34:54 vRecv(Link1,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:34:54
recv a packet at 06:34:56
recv a packet at 06:34:57
vRecv() return status=1
06:35:04 vSend(Link1,cleanup_na_g_1)
Send Neighbor Advertisement (Global Address with Different Link-layer Address) to Link1
06:35:05 vSend(Link1,cleanup_echo_request_g_1)
Send Echo Request (Global) to Link1

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:35:05 vRecv(Link1,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:35:05
recv a packet at 06:35:06
recv a packet at 06:35:07
vRecv() return status=1
06:35:15 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
06:35:20 vRemote(pim6dd.rmt) ``/usr/local/v6eval//bin/manual//pim6dd.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 usePim6dd=stop ''
cuad0: hostname nor servname provided, or not known
``telnet -l cuad0'' was killed with SIGCHLD.
06:35:20Stop Capturing Packets (Link0)
06:35:20Stop Capturing Packets (Link1)
06:35:20End

Packet Reverse Log