Test Information

TitlePart H: Request sent to Global Scope multicast address
CommandLine./v6LC_1_1_10_H.seq -pkt ./v6LC_1_1_10_H.def -log 23.html -ti Part H: Request sent to Global Scope multicast address
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 06:30:04
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./v6LC_1_1_10_H.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

06:30:04Start
06:30:04Start Capturing Packets (Link0)
06:30:04Start Capturing Packets (Link1)

--- start Common Test Setup 1.1 for Router
06:30:04 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
06:30:06Clear Captured Packets (Link0)
06:30:06 vSend(Link0,setup_echo_request)
Send Echo Request (Link-Local) to Link0
06:30:06 vRecv(Link0,setup_echo_reply ns_l2l ns_g2l) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Link-Local to Link-Local) from Link0
06:30:06 vSend(Link0,na_l2l)
Send Neighbor Advertisement (Link-Local to Link-Local) to Link0
06:30:06 vRecv(Link0,setup_echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Link-Local) from Link0
06:30:06Clear Captured Packets (Link0)

--- end Common Test Setup 1.1 for Router
OK
06:30:06 vRemote(pim6dd.rmt) ``/usr/local/v6eval//bin/manual//pim6dd.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 usePim6dd=start ''
cuad0: hostname nor servname provided, or not known
``telnet -l cuad0'' was killed with SIGCHLD.
06:30:06 vSend(Link1,mld_report_to_link1)
send mld_report_to_link1
06:30:06 Wait 3 second
06:30:09Clear Captured Packets (Link0)
06:30:09Clear Captured Packets (Link1)
06:30:09 vSend(Link0,echo_request_ex_to_link0)
Send Echo Request to link0
06:30:09 vRecv(Link1,echo_request_ex_from_link1 ns_g2g_link1 ns_g2l_link1 ns_l2g_link1 ns_l2l u_ns_g2g_link1 u_ns_g2g_wo_link1 u_ns_g2l_link1 u_ns_g2l_wo_link1 u_ns_l2g_link1 u_ns_l2g_wo_link1 u_ns_l2l u_ns_l2l_wo) timeout:5 cntLimit:0 seektime:0
vRecv() return status=1

Can not receive forwarded Echo Request
NG
--- Cleanup RUT
06:30:14Clear Captured Packets (Link0)
06:30:14 vSend(Link0,cleanup_na)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link0
06:30:14 vSend(Link0,cleanup_echo_request)
Send Echo Request to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:30:14 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:30:14
recv a packet at 06:30:20
recv a packet at 06:30:21
recv a packet at 06:30:22
vRecv() return status=1
06:30:24 vSend(Link0,cleanup_na_g)
Send Neighbor Advertisement (Global address with Different Link-layer Address) to Link0
06:30:24 vSend(Link0,cleanup_echo_request_g)
Send Echo Request (Global) to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:30:25 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:30:25
recv a packet at 06:30:26
recv a packet at 06:30:27
vRecv() return status=1
06:30:35Clear Captured Packets (Link1)
06:30:35 vSend(Link1,cleanup_na_1)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link1
06:30:35 vSend(Link1,cleanup_echo_request_1)
Send Echo Request to Link1

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:30:35 vRecv(Link1,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:30:35
recv a packet at 06:30:36
recv a packet at 06:30:37
vRecv() return status=1
06:30:45 vSend(Link1,cleanup_na_g_1)
Send Neighbor Advertisement (Global Address with Different Link-layer Address) to Link1
06:30:45 vSend(Link1,cleanup_echo_request_g_1)
Send Echo Request (Global) to Link1

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:30:45 vRecv(Link1,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:30:45
recv a packet at 06:30:46
recv a packet at 06:30:47
vRecv() return status=1
06:30:55 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
06:33:21 vRemote(pim6dd.rmt) ``/usr/local/v6eval//bin/manual//pim6dd.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 usePim6dd=stop ''
cuad0: hostname nor servname provided, or not known
``telnet -l cuad0'' was killed with SIGCHLD.
06:33:21Stop Capturing Packets (Link0)
06:33:21Stop Capturing Packets (Link1)
06:33:21End

Packet Reverse Log