Test Information

TitlePart E: Request sent from Link Local address
CommandLine./v6LC_1_1_10_E.seq -pkt ./v6LC_1_1_10_E.def -log 20.html -ti Part E: Request sent from Link Local address
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 06:12:44
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./v6LC_1_1_10_E.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

06:12:44Start
06:12:44Start Capturing Packets (Link0)
06:12:44Start Capturing Packets (Link1)

--- start Common Test Setup 1.1 for Router
06:12:44 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
06:12:49Clear Captured Packets (Link0)
06:12:49 vSend(Link0,setup_echo_request)
Send Echo Request (Link-Local) to Link0
06:12:49 vRecv(Link0,setup_echo_reply ns_l2l ns_g2l) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Link-Local to Link-Local) from Link0
06:12:49 vSend(Link0,na_l2l)
Send Neighbor Advertisement (Link-Local to Link-Local) to Link0
06:12:49 vRecv(Link0,setup_echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Link-Local) from Link0
06:12:49Clear Captured Packets (Link0)

--- end Common Test Setup 1.1 for Router
OK
06:12:49Clear Captured Packets (Link0)
06:12:49Clear Captured Packets (Link1)
06:12:49 vSend(Link1,echo_request)
Send Echo Request to Link0
06:12:49 vRecv(Link0,echo_request_f ns_g2g ns_g2l ns_l2g ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_g2l u_ns_g2l_wo u_ns_l2g u_ns_l2g_wo u_ns_l2l u_ns_l2l_wo) timeout:5 cntLimit:0 seektime:0
vRecv() return status=1

OK
--- Cleanup RUT
06:12:54Clear Captured Packets (Link0)
06:12:54 vSend(Link0,cleanup_na)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link0
06:12:54 vSend(Link0,cleanup_echo_request)
Send Echo Request to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:12:54 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:12:54
recv a packet at 06:12:59
recv a packet at 06:13:00
recv a packet at 06:13:01
vRecv() return status=1
06:13:04 vSend(Link0,cleanup_na_g)
Send Neighbor Advertisement (Global address with Different Link-layer Address) to Link0
06:13:04 vSend(Link0,cleanup_echo_request_g)
Send Echo Request (Global) to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:13:04 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:13:04
recv a packet at 06:13:05
recv a packet at 06:13:06
recv a packet at 06:13:10
vRecv() return status=1
06:13:14Clear Captured Packets (Link1)
06:13:14 vSend(Link1,cleanup_na_1)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link1
06:13:14 vSend(Link1,cleanup_echo_request_1)
Send Echo Request to Link1

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:13:14 vRecv(Link1,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:13:14
recv a packet at 06:13:15
recv a packet at 06:13:16
recv a packet at 06:13:21
vRecv() return status=1
06:13:24 vSend(Link1,cleanup_na_g_1)
Send Neighbor Advertisement (Global Address with Different Link-layer Address) to Link1
06:13:24 vSend(Link1,cleanup_echo_request_g_1)
Send Echo Request (Global) to Link1

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:13:24 vRecv(Link1,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:13:24
recv a packet at 06:13:25
recv a packet at 06:13:26
vRecv() return status=1
06:13:34 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
06:14:05Stop Capturing Packets (Link0)
06:14:05Stop Capturing Packets (Link1)
06:14:05End

Packet Reverse Log