Test Information

TitlePart B: Request sent to Global Unicast address (prefix end in zero-valued fields)
CommandLine./v6LC_1_1_10_B.seq -pkt ./v6LC_1_1_10_B.def -log 17.html -ti Part B: Request sent to Global Unicast address (prefix end in zero-valued fields)
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 06:08:04
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./v6LC_1_1_10_B.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

06:08:04Start
06:08:04Start Capturing Packets (Link0)
06:08:04Start Capturing Packets (Link1)

--- start Common Test Setup 1.1 for Router
06:08:04 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
06:08:05Clear Captured Packets (Link0)
06:08:05 vSend(Link0,setup_echo_request)
Send Echo Request (Link-Local) to Link0
06:08:05 vRecv(Link0,setup_echo_reply ns_l2l ns_g2l) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Link-Local to Link-Local) from Link0
06:08:05 vSend(Link0,na_l2l)
Send Neighbor Advertisement (Link-Local to Link-Local) to Link0
06:08:05 vRecv(Link0,setup_echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Link-Local) from Link0
06:08:05Clear Captured Packets (Link0)

--- end Common Test Setup 1.1 for Router
OK
06:08:05Clear Captured Packets (Link0)
06:08:05Clear Captured Packets (Link1)
06:08:05 vSend(Link1,echo_request)
Send Echo Request to Link0
06:08:05 vRecv(Link0,echo_request_f ns_g2g ns_g2l ns_l2g ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_g2l u_ns_g2l_wo u_ns_l2g u_ns_l2g_wo u_ns_l2l u_ns_l2l_wo) timeout:5 cntLimit:0 seektime:0
Recv forwarded Echo Request from Link1

OK
--- Cleanup RUT
06:08:05Clear Captured Packets (Link0)
06:08:05 vSend(Link0,cleanup_na)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link0
06:08:05 vSend(Link0,cleanup_echo_request)
Send Echo Request to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:08:05 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:08:05
recv a packet at 06:08:11
recv a packet at 06:08:12
recv a packet at 06:08:13
vRecv() return status=1
06:08:15 vSend(Link0,cleanup_na_g)
Send Neighbor Advertisement (Global address with Different Link-layer Address) to Link0
06:08:15 vSend(Link0,cleanup_echo_request_g)
Send Echo Request (Global) to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:08:15 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:08:15
recv a packet at 06:08:16
recv a packet at 06:08:17
vRecv() return status=1
06:08:25Clear Captured Packets (Link1)
06:08:25 vSend(Link1,cleanup_na_1)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link1
06:08:25 vSend(Link1,cleanup_echo_request_1)
Send Echo Request to Link1

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:08:25 vRecv(Link1,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:08:25
recv a packet at 06:08:26
recv a packet at 06:08:27
vRecv() return status=1
06:08:35 vSend(Link1,cleanup_na_g_1)
Send Neighbor Advertisement (Global Address with Different Link-layer Address) to Link1
06:08:35 vSend(Link1,cleanup_echo_request_g_1)
Send Echo Request (Global) to Link1

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:08:35 vRecv(Link1,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:08:35
recv a packet at 06:08:36
recv a packet at 06:08:37
vRecv() return status=1
06:08:45 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
06:08:45Stop Capturing Packets (Link0)
06:08:45Stop Capturing Packets (Link1)
06:08:45End

Packet Reverse Log