Test Information

TitlePart A: Request sent to Global Unicast address
CommandLine./v6LC_1_1_10_A.seq -pkt ./v6LC_1_1_10_A.def -log 16.html -ti Part A: Request sent to Global Unicast address
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 05:58:52
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./v6LC_1_1_10_A.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

05:58:52Start
05:58:52Start Capturing Packets (Link0)
05:58:52Start Capturing Packets (Link1)

--- start Common Test Setup 1.1 for Router
05:58:52 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
06:07:18Clear Captured Packets (Link0)
06:07:18 vSend(Link0,setup_echo_request)
Send Echo Request (Link-Local) to Link0
06:07:18 vRecv(Link0,setup_echo_reply ns_l2l ns_g2l) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Link-Local to Link-Local) from Link0
06:07:18 vSend(Link0,na_l2l)
Send Neighbor Advertisement (Link-Local to Link-Local) to Link0
06:07:18 vRecv(Link0,setup_echo_reply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Link-Local) from Link0
06:07:18Clear Captured Packets (Link0)

--- end Common Test Setup 1.1 for Router
OK
06:07:18Clear Captured Packets (Link0)
06:07:18Clear Captured Packets (Link1)
06:07:18 vSend(Link1,echo_request)
Send Echo Request to Link0
06:07:18 vRecv(Link0,echo_request_f ns_g2g ns_g2l ns_l2g ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_g2l u_ns_g2l_wo u_ns_l2g u_ns_l2g_wo u_ns_l2l u_ns_l2l_wo) timeout:5 cntLimit:0 seektime:0
Recv Neighbor Solicitation (Link-Local to Global) from Link0
06:07:18 vSend(Link0,na_g2l)
Send Neighbor Advertisement (Global to Link-Local) to Link0
06:07:18 vRecv(Link0,echo_request_f ns_g2g ns_g2l ns_l2g ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_g2l u_ns_g2l_wo u_ns_l2g u_ns_l2g_wo u_ns_l2l u_ns_l2l_wo) timeout:5 cntLimit:0 seektime:0
Recv forwarded Echo Request from Link1

OK
--- Cleanup RUT
06:07:18Clear Captured Packets (Link0)
06:07:18 vSend(Link0,cleanup_na)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link0
06:07:18 vSend(Link0,cleanup_echo_request)
Send Echo Request to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:07:18 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:07:18
recv a packet at 06:07:24
recv a packet at 06:07:25
recv a packet at 06:07:26
vRecv() return status=1
06:07:28 vSend(Link0,cleanup_na_g)
Send Neighbor Advertisement (Global address with Different Link-layer Address) to Link0
06:07:29 vSend(Link0,cleanup_echo_request_g)
Send Echo Request (Global) to Link0

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:07:29 vRecv(Link0,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:07:29
recv a packet at 06:07:34
recv a packet at 06:07:35
recv a packet at 06:07:36
vRecv() return status=1
06:07:39Clear Captured Packets (Link1)
06:07:39 vSend(Link1,cleanup_na_1)
Send Neighbor Advertisement (Link-Local Address with Different Link-layer Address) to Link1
06:07:39 vSend(Link1,cleanup_echo_request_1)
Send Echo Request to Link1

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:07:39 vRecv(Link1,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:07:39
recv a packet at 06:07:40
recv a packet at 06:07:41
vRecv() return status=1
06:07:49 vSend(Link1,cleanup_na_g_1)
Send Neighbor Advertisement (Global Address with Different Link-layer Address) to Link1
06:07:49 vSend(Link1,cleanup_echo_request_g_1)
Send Echo Request (Global) to Link1

Wait for transit target Neighbor Cache Entry to INCOMPLETE/NONCE (10 sec.)
06:07:49 vRecv(Link1,) timeout:10 cntLimit:0 seektime:0
recv a packet at 06:07:49
recv a packet at 06:07:50
recv a packet at 06:07:51
vRecv() return status=1
06:07:59 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
06:08:02Stop Capturing Packets (Link0)
06:08:02Stop Capturing Packets (Link1)
06:08:02End

Packet Reverse Log