Test Information

TitleValidate Packet Too Big
CommandLine./Validate_PTB.seq -pkt ./Validate_PTB.def -log 16.html -ti Validate Packet Too Big
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/20 11:14:41
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./Validate_PTB.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

11:14:41Start
11:14:41Start Capturing Packets (Link0)

--- start Common Test Setup 1.1 for Router
11:14:41 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
11:14:47Clear Captured Packets (Link0)
11:14:47 vSend(Link0,setup_echo_request)
Send Echo Request (Link-Local) to Link0
11:14:47 vRecv(Link0,setup_echo_reply ns_l2l ns_g2l) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 11:14:48
Recv Neighbor Solicitation (Link-Local to Link-Local) from Link0
11:14:48 vSend(Link0,na_l2l)
Send Neighbor Advertisement (Link-Local to Link-Local) to Link0
11:14:48 vRecv(Link0,setup_echo_reply) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 11:14:48
Recv Echo Reply (Link-Local) from Link0
11:14:48Clear Captured Packets (Link0)

--- end Common Test Setup 1.1 for Router
OK
11:14:48 vSend(Link0,echo_request1500)
Send Echo Request (Packet size is 1500)
11:14:48 vRecv(Link0,u_ns_g2l_wo ns_l2l u_ns_l2l_wo u_ns_g2l u_ns_l2g_wo ns_g2g ns_g2l u_ns_l2l u_ns_g2g u_ns_g2g_wo u_ns_l2g ns_l2g echo_reply1500) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Packet size is 1500)

OK
11:14:48 vSend(Link0,PktTooBig1304)
Send Packet Too Big message (1304 octets)
11:14:48 vSend(Link0,echo_request1500)
Send Echo Request (Packet size is 1500)
11:14:48 vRecv(Link0,u_ns_g2l_wo ns_l2l u_ns_g2l u_ns_l2l_wo ns_g2g u_ns_l2g_wo u_ns_l2l ns_g2l u_ns_g2g u_ns_g2g_wo u_ns_l2g ns_l2g echo_reply1500) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 11:14:48
recv unexpect packet at 11:14:48
recv unexpect packet at 11:14:48
recv unexpect packet at 11:14:48
vRecv() return status=1

Cannot receive Echo Reply
NG
Target: Reboot
11:14:53 vRemote(reboot.rmt) ``/usr/local/v6eval//bin/manual//reboot.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 timeout=300''
reboot> 
lio_start
reboot> Reboot NUT.
reboot>     * Wait until NUT boot up completely.
reboot>         Ex.) Wait until catch up login prompt.
reboot> 
reboot> Press Enter key for continue. 
lio_stop
reboot> 

11:14:55Stop Capturing Packets (Link0)
11:14:55End

Packet Reverse Log