Test v6LC.2.3.16 - Redirect Transmit (Routers Only)
Part D: Destination Multicast
Verify that a router properly handles transmission of Redirect messages.
* [ND] Sections 8.2
* Packet generator
* Monitor to capture packets
Common Setup 1.1 is performed at the beginning of each test part. The Common Test
Cleanup Procedure is performed after each part.
i. TN2 is an on-link neighbor on Link B to TN1 (instead of residing on Link A
depicted in Common Topology).
ii. RUT advertises prefix X on Link B.
Part D: Destination Multicast
8. TN1 transmits an Echo Request to TN2's solicited-node multicast address with a first hop
through the RUT.
9. Observe the packets transmitted by the RUT.
Parts C and D
Steps 7 and 9: The RUT should not send a Redirect message.
* The RUT may not support the generation of Redirect messages.