Test Information

TitlePart C: Global Address, On-link Prefix does not cover TN2
CommandLine./V6LC_2_1_1_D.seq -pkt ./V6LC_2_1_1_D.def -log 4.html -ti Part C: Global Address, On-link Prefix does not cover TN2
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 08:39:43
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./V6LC_2_1_1_D.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

08:39:43Start
08:39:43Start Capturing Packets (Link0)

Test Procedure
08:39:43 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::200:ff:fe00:a0a0 if=ens192''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::200:ff:fe00:a0a0
route> interface        = ens192

route> then press enter key.
lio_stop
08:40:04 vRecv(Link0,tr1_mcast_ns_nosll_linklocal_common tr1_mcast_ns_linklocal_common) timeout:3 cntLimit:0 seektime:0
vRecv() return status=1
08:40:07Clear Captured Packets (Link0)
08:40:07 vSend(Link0,tn2_ereq_offlink_via_tr1)
Send Echo Request via TR1: TN2 (global) -> HUT (global)
08:40:07 vRecv(Link0,tr1_mcast_ns_global_common tr1_mcast_ns_linklocal_common) timeout:2 cntLimit:0 seektime:0
Recv NS w/ SLL: NUT (global) -> TR1 (link-local) solicited-node multicast address
08:40:07 vRecv(Link0,) timeout:4 cntLimit:0 seektime:0
recv a packet at 08:40:08
recv a packet at 08:40:09
vRecv() return status=1

PASS
Common Test Cleanup
08:40:11 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::200:ff:fe00:a0a0 if=ens192''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::200:ff:fe00:a0a0
route> interface        = ens192

route> then press enter key.
lio_stop
08:40:42Stop Capturing Packets (Link0)
08:40:42End

Packet Reverse Log