Test Information

TitlePart B: RS processing without SLL, no NCE
CommandLine./v6LC_2_2_10_B.seq -pkt ./v6LC_2_2_10_B.def -log 138.html -ti Part B: RS processing without SLL, no NCE
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 10:37:00
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./v6LC_2_2_10_B.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

10:37:00Start
10:37:00Start Capturing Packets (Link0)

Test Procedure
10:37:00 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=start link0=ens192''
racontrol> 
lio_start
racontrol> Start to send RA using following configuration.
racontrol> 	Advertising Interface: ens192
racontrol> 
racontrol> 	configuration should be the value specified in RFC 4861.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

10:37:37 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 10:37:36
recv a packet at 10:37:52
recv a packet at 10:37:53
recv a packet at 10:38:08
recv a packet at 10:38:19
vRecv() return status=1
10:38:29 vSend(Link0,rs_local)
Send RS w/o SLL: TN1 (link-local) -> all-routers multicast address
10:38:29 vRecv(Link0,) timeout:1.5 cntLimit:0 seektime:0
recv a packet at 10:38:29
recv a packet at 10:38:30
vRecv() return status=1
10:38:30 vSend(Link0,tn1_ereq_common)
Send Echo Request: TN1 (link-local) -> NUT (link-local)
10:38:30 vRecv(Link0,tn1_mcast_ns_global_common tn1_mcast_ns_linklocal_common) timeout:2 cntLimit:0 seektime:0
Recv NS w/ SLL: NUT (link-local) -> TN1 (link-local) solicited-node multicast address
10:38:31 vRecv(Link0,) timeout:4 cntLimit:0 seektime:0
vRecv() return status=1

PASS
Common Test Cleanup
10:38:35 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=stop ''
racontrol> 
lio_start
racontrol> Stop to send RA.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

10:38:38 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 10:38:38
recv a packet at 10:38:58
vRecv() return status=1
10:39:30Stop Capturing Packets (Link0)
10:39:30End

Packet Reverse Log