Test Information

TitlePart A: RS processing with SLL, no NCE
CommandLine./v6LC_2_2_10_A.seq -pkt ./v6LC_2_2_10_A.def -log 137.html -ti Part A: RS processing with SLL, no NCE
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 10:34:24
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./v6LC_2_2_10_A.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

10:34:24Start
10:34:24Start Capturing Packets (Link0)

Test Procedure
10:34:24 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=start link0=ens192''
racontrol> 
lio_start
racontrol> Start to send RA using following configuration.
racontrol> 	Advertising Interface: ens192
racontrol> 
racontrol> 	configuration should be the value specified in RFC 4861.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

10:34:45 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 10:34:27
recv a packet at 10:34:40
recv a packet at 10:34:45
recv a packet at 10:35:01
recv a packet at 10:35:17
vRecv() return status=1
10:35:37 vSend(Link0,rs_local)
Send RS w/ SLL: TN1 (link-local) -> all-routers multicast address
10:35:37 vRecv(Link0,) timeout:1.5 cntLimit:0 seektime:0
recv a packet at 10:35:37
vRecv() return status=1
10:35:38 vSend(Link0,tn1_ereq_common)
Send Echo Request: TN1 (link-local) -> NUT (link-local)
10:35:38 vRecv(Link0,tn1_erep_common) timeout:2 cntLimit:0 seektime:0
Recv Echo Reply: NUT (link-local) -> TN1 (link-local)
10:35:38 vRecv(Link0,tn1_ucast_ns_global tn1_ucast_ns_global_sll tn1_ucast_ns_linklocal tn1_ucast_ns_linklocal_sll) timeout:7 cntLimit:0 seektime:0
Recv NS w/ SLL: NUT (link-local) -> TN1 (link-local)
10:35:42 vRecv(Link0,) timeout:4 cntLimit:0 seektime:0
recv a packet at 10:35:43
recv a packet at 10:35:44
recv a packet at 10:35:44
vRecv() return status=1

PASS
Common Test Cleanup
10:35:46 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=stop ''
racontrol> 
lio_start
racontrol> Stop to send RA.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

10:36:05 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 10:36:10
recv a packet at 10:36:20
recv a packet at 10:36:49
vRecv() return status=1
10:36:57Stop Capturing Packets (Link0)
10:36:57End

Packet Reverse Log