Test Information

TitleRouter Sends Valid Router Advertisement (Routers Only)
CommandLine./V6LC_2_2_5.seq -pkt ./V6LC_2_2_5.def -log 125.html -ti Router Sends Valid Router Advertisement (Routers Only)
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 10:08:37
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./V6LC_2_2_5.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

10:08:37Start
10:08:37Start Capturing Packets (Link0)

Test Procedure
10:08:37 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=start link0=ens192''
racontrol> 
lio_start
racontrol> Start to send RA using following configuration.
racontrol> 	Advertising Interface: ens192
racontrol> 
racontrol> 	configuration should be the value specified in RFC 4861.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

10:09:32 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 10:08:59
recv a packet at 10:09:36
recv a packet at 10:09:52
recv a packet at 10:10:04
recv a packet at 10:10:08
vRecv() return status=1
10:10:24 vSend(Link0,rs_local)
Send RS w/o SLL: unspecified address -> all-routers multicast address
10:10:24 vRecv(Link0,ra ra_sll ra_mtu ra_sll_mtu) timeout:1.5 cntLimit:0 seektime:0
Recv RA w/ SLL w/ MTU: RUT (link-local) -> all-nodes multicast address

PASS
Common Test Cleanup
10:10:24 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=stop ''
racontrol> 
lio_start
racontrol> Stop to send RA.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

10:10:31 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 10:10:35
recv a packet at 10:11:08
vRecv() return status=1
10:11:23Stop Capturing Packets (Link0)
10:11:23End

Packet Reverse Log