Test Information

TitlePart C: ICMPv6 code is not 0
CommandLine./V6LC_2_2_4_C.seq -pkt ./V6LC_2_2_4_C.def -log 121.html -ti Part C: ICMPv6 code is not 0
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 09:48:39
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./V6LC_2_2_4_C.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

09:48:39Start
09:48:39Start Capturing Packets (Link0)

Test Procedure
09:48:39 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=start link0=ens192''
racontrol> 
lio_start
racontrol> Start to send RA using following configuration.
racontrol> 	Advertising Interface: ens192
racontrol> 
racontrol> 	configuration should be the value specified in RFC 4861.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

09:48:47 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 09:48:45
recv a packet at 09:48:51
recv a packet at 09:49:07
recv a packet at 09:49:23
vRecv() return status=1
09:49:39 vSend(Link0,rs_local)
Send RS w/o SLL (ICMPv6 code is not 0): unspecified address -> all-routers multicast address
09:49:39 vRecv(Link0,mcast_ra_any) timeout:1.5 cntLimit:0 seektime:0
vRecv() return status=1

PASS
Common Test Cleanup
09:49:40 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=stop ''
racontrol> 
lio_start
racontrol> Stop to send RA.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

09:49:46 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 09:49:48
recv a packet at 09:49:50
vRecv() return status=1
09:50:38Stop Capturing Packets (Link0)
09:50:38End

Packet Reverse Log