Test Information

TitlePart B: ICMPv6 checksum is not valid
CommandLine./V6LC_2_2_4_B.seq -pkt ./V6LC_2_2_4_B.def -log 120.html -ti Part B: ICMPv6 checksum is not valid
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/23 09:46:44
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./V6LC_2_2_4_B.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

09:46:44Start
09:46:44Start Capturing Packets (Link0)

Test Procedure
09:46:44 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=start link0=ens192''
racontrol> 
lio_start
racontrol> Start to send RA using following configuration.
racontrol> 	Advertising Interface: ens192
racontrol> 
racontrol> 	configuration should be the value specified in RFC 4861.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

09:46:45 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 09:46:45
recv a packet at 09:47:01
recv a packet at 09:47:17
vRecv() return status=1
09:47:37 vSend(Link0,rs_local)
Send RS w/o SLL (ICMPv6 checksum is not valid): unspecified address -> all-routers multicast address
09:47:37 vRecv(Link0,mcast_ra_any) timeout:1.5 cntLimit:0 seektime:0
vRecv() return status=1

PASS
Common Test Cleanup
09:47:38 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=stop ''
racontrol> 
lio_start
racontrol> Stop to send RA.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

09:47:45 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 09:47:40
recv a packet at 09:47:49
vRecv() return status=1
09:48:37Stop Capturing Packets (Link0)
09:48:37End

Packet Reverse Log