Test Information

TitlePart D: Request sent to multicast address - All Routers Addresses (Routers Only)
CommandLine./Echo_Multicast_Router.seq -pkt ./Echo_Multicast_Router.def -log 6.html -ti Part D: Request sent to multicast address - All Routers Addresses (Routers Only)
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/20 11:24:10
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./Echo_Multicast_Router.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

11:24:10Start

Initialization
11:24:10Start Capturing Packets (Link0)
11:24:10 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=start link0=ens192''
racontrol> 
lio_start
racontrol> Start to send RA using following configuration.
racontrol> 	Advertising Interface: ens192
racontrol> 
racontrol> 	configuration should be the value specified in RFC 4861.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

11:24:32 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 11:24:32
recv a packet at 11:24:40
recv a packet at 11:24:48
recv a packet at 11:25:04
recv a packet at 11:25:20
vRecv() return status=1

Setup
11:25:24 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
11:25:52 vSend(Link0,echo_request_link_local)
Send Echo Request (Link-local address)
11:25:52 vRecv(Link0,echo_reply_link_local ns_local ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 11:25:45
Receive Neighbor Solicitation
11:25:52 vSend(Link0,na_local)
Send Neighbor Advertisement
11:25:52 vRecv(Link0,echo_reply_link_local) timeout:5 cntLimit:0 seektime:0
Receive Echo Reply (Link-local address)

TN created the entry of TN's link-local address to Neighbor cache of NUT.
11:25:52 vSend(Link0,echo_request_global)
Send Echo Request (Global address)
11:25:52 vRecv(Link0,echo_reply_global ns_global ns_global_sll ns_global_from_local ns_global_sll_from_local ns_local ns_local_sll) timeout:5 cntLimit:0 seektime:0
Receive Neighbor Solicitation
11:25:52 vSend(Link0,na_global)
Send Neighbor Advertisement
11:25:52 vRecv(Link0,echo_reply_global) timeout:5 cntLimit:0 seektime:0
Receive Echo Reply (Global address)

TN created the entry of TN's global address to Neighbor cache of NUT.
Test
11:25:52 vSend(Link0,echo_request)
Send Echo Request (All Routers Addresses)
11:25:52 vRecv(Link0,echo_reply ns_local ns_local_sll ns_global ns_global_sll) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply (Link-local address)

TN can receive Echo Reply from NUT
OK
Cleanup
11:25:52 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
11:25:53 vSend(Link0,clean_na_global)
send clean_na_global
11:25:53 vSend(Link0,echo_request_global)
Send Echo Request (Global address)
11:25:53 vRecv(Link0,clean_echo_reply_global) timeout:5 cntLimit:0 seektime:0
recv clean_echo_reply_global
11:25:53 Wait 10 second
11:26:03 vRecv(Link0,clean_ns_global_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_global_sll
11:26:03 vRecv(Link0,clean_ns_global_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_global_sll
11:26:03 vRecv(Link0,clean_ns_global_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_global_sll
11:26:03Clear Captured Packets (Link0)
11:26:03 vSend(Link0,clean_na_local)
send clean_na_local
11:26:03 vSend(Link0,echo_request_link_local)
Send Echo Request (Link-local address)
11:26:03 vRecv(Link0,clean_echo_reply_link_local) timeout:5 cntLimit:0 seektime:0
recv clean_echo_reply_link_local
11:26:03 Wait 10 second
11:26:13 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
11:26:13 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
11:26:13 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
11:26:13Clear Captured Packets (Link0)
11:26:13 vRemote(racontrol.rmt) ``/usr/local/v6eval//bin/manual//racontrol.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 mode=stop ''
racontrol> 
lio_start
racontrol> Stop to send RA.
racontrol> 
racontrol> Press Enter key for continue. 
lio_start
racontrol> 

11:26:15 vRecv(Link0,) timeout:52 cntLimit:0 seektime:0
recv a packet at 11:26:48
vRecv() return status=1
11:27:07Stop Capturing Packets (Link0)
11:27:07End

Packet Reverse Log