Test Information

TitlePart A: Request sent to Link-Local address
CommandLine./Echo_Link-Local.seq -pkt ./Echo_Link-Local.def -log 3.html -ti Part A: Request sent to Link-Local address
TestVersionV6LC_5_0_9
ToolVersionREL_3_3_5
Start2024/12/20 11:21:36
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./Echo_Link-Local.def
Systemmanual
TargetNameUbuntu_24.04.1
HostNameTahi-Tool
Typerouter

Test Sequence Execution Log

11:21:36Start

Initialization
11:21:36Start Capturing Packets (Link0)
11:21:36 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=add prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = add
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
11:22:01 vSend(Link0,echo_request_link_local)
Send Echo Request (Link-local address)
11:22:01 vRecv(Link0,echo_reply_link_local ns_local ns_local_sll) timeout:5 cntLimit:0 seektime:0
Receive Neighbor Solicitation
11:22:01 vSend(Link0,na_local)
Send Neighbor Advertisement
11:22:01 vRecv(Link0,echo_reply_link_local) timeout:5 cntLimit:0 seektime:0
Receive Echo Reply (Link-local address)

TN can receive Echo Reply from NUT
OK
Cleanup
11:22:01 vRemote(route.rmt) ``/usr/local/v6eval//bin/manual//route.rmt -t manual -u root -p cnlabs123 -d cuad0 -o 1 cmd=delete prefix=default gateway=fe80::0200:00ff:fe00:0100 if=ens192 ''
lio_start
route> Set Static Route of NUT manually as following:

route> command          = delete
route> address family   = inet6
route> address type     = host
route> prefix           = default
route> gateway          = fe80::0200:00ff:fe00:0100
route> interface        = ens192

route> then press enter key.
lio_stop
11:22:03 vSend(Link0,clean_na_local)
send clean_na_local
11:22:03 vSend(Link0,echo_request_link_local)
Send Echo Request (Link-local address)
11:22:03 vRecv(Link0,clean_echo_reply_link_local) timeout:5 cntLimit:0 seektime:0
recv clean_echo_reply_link_local
11:22:03 Wait 10 second
11:22:13 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
11:22:13 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
11:22:13 vRecv(Link0,clean_ns_local_sll) timeout:5 cntLimit:0 seektime:0
recv clean_ns_local_sll
11:22:13Clear Captured Packets (Link0)
11:22:13Stop Capturing Packets (Link0)
11:22:13End

Packet Reverse Log