NAME

LLA_DAD_NSPostDAD_SameDstSameTgt - NUT receives DAD NS (target == NUT)

TARGET

All Node

SYNOPSIS

LLA_DAD_NSPostDAD_SameDstSameTgt.seq [-tooloption ...] -pkt <packetdef> [addrconf=<addrconfname>]

  -tooloption   : v6eval tool option
  <packetdef>   : packet definition file (v6eval tool option)
  <addrconfname>: how to configure address on NUT; boot/reboot

 detail of v6eval tool option: see perldoc V6evalTool.pm, perldoc V6evalRemote.pm

INITIALIZATION

 Reboot NUT or Initialize interface of NUT or Initialize IPv6 stack of NUT.

TEST PROCEDURE

Verify that a node can properly process neigbor solicitations and advertisements performing Duplicate Address Detection while the node is also performing DAD.

   8.  Initialize all devices on Link A.
   9.  After TN1 receives a DAD NS message from the NUT. Configure TN1 to transmit DAD Neighbor Solicitation A with the Target 
       Address set to the NUT's tentative link-local address.
   10. Allow time for all devices on Link A to perform stateless address autoconfiguration and Duplicate Address Detection.
   11. Transmit a NS from TN1 to the solicited-node multicast address of the NUT's link-local address with the Target Address 
       set to the NUT's link-local address.
   12. Observe packet captures on Link A.
   13. Transmit a NS from TN1 to the link-local address of the NUT with the Target Address set to the NUT's link-local address.
   14. Observe packet captures on Link A.

JUDGEMENT

   Step 10: The NUT should receive more DAD NS messages than expected with its tentative link-local address as the Target address
            The NUT should determine its tentative address is a duplicate and should not assign the tentative address to its interface.
   Step 12: The NUT must NOT transmit a Solicited NA for its autoconfigured link-local address.
   Step 14: The NUT must NOT transmit a Solicited NA for its autoconfigured link-local address.

Possible Problems

CLEANUP

NONE

REFERENCE

RFC 4862 - IPv6 Stateless Address Autoconfiguration