NAME

LLA_DAD_NSPostDAD_Reserved - NUT receives valid DAD NS (Reserved Field).


TARGET

All Node


SYNOPSIS

LLA_DAD_NSPostDAD_Reserved.seq [-tooloption ...] -pkt <packetdef> [addrconf=<addrconfname>]

  -tooloption   : v6eval tool option
  <packetdef>   : packet definition file (v6eval tool option)
  <addrconfname>: how to configure address on NUT; boot/reboot
 detail of v6eval tool option: see perldoc V6evalTool.pm, perldoc V6evalRemote.pm


INITIALIZATION

 Reboot NUT or Initialize interface of NUT or Initialize IPv6 stack of NUT.


TEST PROCEDURE

Verify taht a node can properly ignore invalid neigbor solicitations while performing Duplicate Address Detection.

   57. Initialize all devices on Link A.
   58. After TN1 receives a DAD NS message from the NUT, configure TN1 to transmit Neighbor Solicitation A with 
       the Reserved field set to 0xFFFFFFFF.
   59. Allow time for all devices on Link A to perform stateless address autoconfiguration and Duplicate Address Detection.
   60. Transmit a NS from TN1 to the solicited-node multicast address of the NUT's link-local address with the 
       Target Address set to the NUT's link-local address.
   61. Observe packet captures on Link A.
   62. Transmit a NS from TN1 to the link-local address of the NUT with the Target Address set to the NUT's link-local address.
   63. Observe packet captures on Link A.


JUDGEMENT

   Step 59: The NUT should ignore the contents of the Reserved field.
            The NUT should not assign the tentative address to its interface.
   Step 61: The NUT must NOT transmit a Solicited NA for its autoconfigured link-local address.
   Step 63: The NUT must NOT transmit a Solicited NA for its autoconfigured link-local address.


Possible Problems


CLEANUP

NONE


REFERENCE

RFC 4862 - IPv6 Stateless Address Autoconfiguration


SEE ALSO

 detail of v6eval tool option: see perldoc V6evalTool.pm, perldoc V6evalRemote.pm