NIST logo

Publications Portal

You searched on:
Topic Area: High Performance Buildings

Displaying records 41 to 50 of 133 records.
Resort by: Date / Title


41. Foreword to Information Modeling for Interoperable Dimensional Metrology
Topic: High Performance Buildings
Published: 12/30/2011
Author: John A Horst
Abstract: The value of information exchange standards development is described and defended against other data exchange interoperability options in the context of dimensional metrology in manufacturing.
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908909

42. EVAP-COND, Version 3
Topic: High Performance Buildings
Published: 9/22/2011
Authors: Piotr A Domanski, David A Yashar
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902404

43. Ventilation Measurements in IAQ Studies: Problems and Opportunities
Topic: High Performance Buildings
Published: 8/30/2011
Authors: Andrew Keith Persily, Hal Levin
Abstract: Building and space ventilation rates are primary determinants of indoor pollutant levels and occupant exposures, and the impacts of ventilation on health and comfort have long been recognized in ventilation standards and regulations. Despite the im ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907718

44. Alternative Cooling Technology Options
Topic: High Performance Buildings
Published: 8/21/2011
Authors: J S Brown, Piotr A Domanski
Abstract: This paper considers the alternative cooling technologies studied by Fisher et al. (1994) and assesses their current potential to compete with or to replace vapor compression refrigeration technology for space cooling and near-room temperature refrig ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907958

45. IMPACT OF CLASSICAL ASSUMPTIONS IN MODELLING A MICROCHANNEL GAS COOLER
Topic: High Performance Buildings
Published: 7/5/2011
Authors: Santiago Martinez-Ballester, Jose M. Corberan, Jose Gonzalvez-Macia, Piotr A Domanski
Abstract: Most of the current air-to-refrigerant heat exchanger models use the classic ε-NTU approach. These models do not account for 2D longitudinal heat conduction in the tube and the longitudinal heat conduction in the fin. These models, also do not ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907650

46. A Computational and Experimental Investigation of Thermal Desorption and Vapor Sampling in an Explosive Trace Detector
Topic: High Performance Buildings
Published: 6/30/2011
Authors: Matthew E Staymates, Wayne Smith, Eric S Windsor
Abstract: Swipe-based explosive trace detectors rely on thermal desorption to vaporize explosive particles collected on a swipe. The vaporized material is carried by air flows from the desorption unit to the inlet of the chemical analyzer, typically an ion mo ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=900937

47. Characterization of Approach Air Distribution for a Finned-Tube Heat Exchanger
Topic: High Performance Buildings
Published: 2/18/2011
Authors: David A Yashar, Piotr A Domanski, Hong H. Cho
Abstract: The distribution of air flow approaching a finned-tube heat exchanger is one of the predominant factors influencing the heat exchanger‰s performance. This paper describes a method for measuring and predicting the inlet air flow distribution using Par ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=903642

48. Metrics for the Cost of Proprietary Information Exchange Languages in Intelligent Systems
Topic: High Performance Buildings
Published: 1/31/2011
Authors: John A Horst, Nathan Hartman, George Wong
Abstract: The increasing number of intelligent software components is accompanied by an increase of proprietary information exchange languages between components. One of the challenges for the smart technology worker is to achieve intelligent system component ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906741

49. Bilateral Comparison Confirms NIM‰s and NIST‰s Gas Flow Capabilities
Topic: High Performance Buildings
Published: 10/15/2010
Authors: Aaron N Johnson, CHUNHUI LI
Abstract: The bilateral comparison between NIM and NIST for gas flow was conducted from June 2008 to October 2009. Two critical flow venturis (CFVs) with nominal throat diameters of 10 mm and 20 mm, respectively, were selected as transfer standards. The CFVs w ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906063

50. Properties for Accurate Gas Flow Measurements
Topic: High Performance Buildings
Published: 10/15/2010
Author: John D Wright
Abstract: Accurate gas properties are needed to take full advantage of the low uncertainties provided by NIST‰s Gas Flow Calibration Services. If a flowmeter user and NIST use different values for these properties (molecular mass, compressibility, density, vis ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905976



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series