NIST logo

Publications Portal

You searched on:
Topic Area: Materials Science
Sorted by: title

Displaying records 461 to 470 of 507 records.
Resort by: Date / Title


461. The Influence Of Hydrogen On The Elastic Modulus And Anelastic Response Of Cold Worked Pure Iron
Topic: Materials Science
Published: 7/1/2009
Authors: Richard E Ricker, David J Pitchure
Abstract: Understanding the influence of hydrogen on elastic deformation and anelastic response should contribute to our understanding of the influence of hydrogen on deformation and fracture. To accomplish this objective, samples of pure iron were cold-worked ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901982

462. The Influence of Matrix and LaserEnergy on the Molecular MassDistribution of Synthetic Polymers Obtained by MALDI-TOF-MS
Topic: Materials Science
Published: Date unknown
Authors: S Wetzel, Charles Martin Guttman, J. Girard
Abstract: The molecular mass distribution (MMD) obtained in synthetic polymer characterization by matrix-assisted laser desorption/ionizationtime-of-flight mass spectrometry (MALDI-TOF-MS) may be biased by preferential desorption/ionization of low mass polymer ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=852547

463. The International Institute of Welding: Report on 1998 Actions
Topic: Materials Science
Published: 5/3/1999
Author: Thomas Allen Siewert
Abstract: Commission V covers issues of weld inspection and quality control for the International Institute of Welding (IIW). This report summarizes the information presented at the 1998 Annual Assembly: descriptions of both research and draft ISO standards b ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851212

464. The Recovery of Elastic Properties at 35 C in Trip 700 Steel Following Deformation
Topic: Materials Science
Published: 6/1/2007
Authors: David J Pitchure, Richard E Ricker
Abstract: The influence of plastic deformation on the elastic properties that determine the magnitude of springback following forming was investigated using dynamic modulus analysis. For this study, the elastic modulus of TRIP 700 steel was measured continuou ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853488

465. The Role of Folding in the Degradation of Ballistic Fibers
Topic: Materials Science
Published: 8/2/2010
Authors: Gale Antrus Holmes, Walter G McDonough, Jae Hyun Kim, Derek Li-Te Ho
Abstract: Failures of certified soft body armor led to a call to understand the underlying mechanisms of the failure. Research has indicated that the folding of ballistic fibers comprising the soft body armor may be a factor in the performance deterioration t ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=854025

466. The effect of thermal oxidation on laser-induced photoelectron emission during tensile deformation of polycrystalline aluminum
Topic: Materials Science
Published: 4/1/2010
Authors: M Cai, S C Langford, Richard E Ricker, Lyle E Levine, J T Dickinson
Abstract: Many metals emit electrons when exposed to UV radiation from excimer lasers (photon energies 4 eV to 8 eV). Deformation can significantly affect the intensity of these emissions. In the case of reactive metals, these emissions are also altered by t ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=904291

467. The effect of urban trees on the rental price of single-family homes in Portland, Oregon
Topic: Materials Science
Published: 8/1/2011
Authors: Geoffrey Donovan, David T Butry
Abstract: Few studies have estimated the effect of environmental amenities on the rental price of houses. We address this gap in the literature by quantifying the effect of urban trees on the rental price of single-family homes in Portland, Oregon. We found th ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907993

468. The evaluation of photo/e-beam complementary grayscale lithography for high topography 3D structure
Topic: Materials Science
Published: 3/29/2013
Authors: Liya Yu, Richard J Kasica, Robert Dennis Newby, Lei Chen, Vincent K Luciani
Abstract: This article demonstrates and evaluates photo/e-beam grayscale complementary lithography processes for the fabrication of large area, high topography grayscale structure. The combination of these two techniques capitalizes on the capability of photol ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913677

469. The molecular basis of mesophase ordering in a thiophene-based copolymer
Topic: Materials Science
Published: 2/18/2009
Authors: Dean M DeLongchamp, Regis J Kline, Youngsuk Jung, Eric K Lin, Daniel A Fischer, David J Gundlach, Andrew Moad, Lee J Richter, Michael F. Toney, Martin Heeney, Iain McCulloch
Abstract: The carrier mobility of poly(2,5-bis(3-alkylthiophen-2-yl) thieno[3,2-b]thiophene) semiconductors can be substantially enhanced after heating through a thermotropic mesophase transition, which causes a significant improvement in thin film structural ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=852781

470. The potential of atomistic simulations and the knowledgebase of interatomic models (KIM)
Topic: Materials Science
Published: 7/1/2011
Authors: E Tadmor, R Elliott, James P. Sethna, R Miller, Chandler A Becker
Abstract: N/A (invited opinion)
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908532



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series