NIST logo

Publications Portal

You searched on: Topic Area: Materials Science Sorted by: title

Displaying records 441 to 450 of 549 records.
Resort by: Date / Title

441. Springer Handbook of Metrology and Testing, Electrical Properties
Topic: Materials Science
Published: 8/1/2011
Authors: Jan Obrzut, Bernd Schumacher, Heinz-Gunter Bach, Petra Spitzer
Abstract: The dielectric properties of materials are used to describe electrical energy storage, dissipation and energy transfer. The most relevant physical processes in dielectric materials from the practical view point are those which result in power loss. M ...

442. Stability Phase-Fields in the and Pyrochlore Formation in Sections of the Bi^d2^O^d3^-Al^d2^O^d3-^Nb^d2^O^d5^
Topic: Materials Science
Published: 5/8/2008
Authors: Terrell A Vanderah, Jorge Torres Guzman, Juan C Nino
Abstract: Bismuth niobate-based ceramic materials are of interest for embedded elements such as capacitors, resonators, and filters because they exhibit high relative dielectric permittivities and tend to be processible at temperatures in the 1000 C to 1200 ...

443. Statistical Calibration of ASTM C150 Bogue-Derived Phase Limits to Directly Determined Phases by Quantitative X-Ray Powder Diffraction
Topic: Materials Science
Published: 7/15/2010
Authors: Paul E Stutzman, Stefan D Leigh
Abstract: Statistical analyses of companion Bogue (ASTM C150) and quantitative X-ray powder diffraction (QXRD) estimates for cement phases are used to establish the most likely linear relationship between these two measurement techniques for alite, belite, ...

444. Stiffness, strength, and ductility of thin films and membranes ‹ A combined wrinkling-cracking methodology
Topic: Materials Science
Published: 7/15/2011
Authors: Jun Y. Chung, Junghyun Lee, Kathryn L Beers, Christopher M Stafford
Abstract: Polymer membranes are at the core of a diverse set of technologies critical to our global health and security, ranging from energy production to water purification to carbon capture. These engineered membranes must maintain performance over many yea ...

445. Strain and Magnetic-Field Characterization of a Bronze-Route Nb^d3^Sn ITER Wire: Benchmarking of Strain Measurement Facilities at NIST and University of Twente
Topic: Materials Science
Published: 6/1/2012
Authors: Najib Cheggour, Arend Nijhuis, H J. G. Krooshoop, Xifeng Lu, Jolene D Splett, Theodore C Stauffer, Loren Frederick Goodrich, Matthew C. Jewell, Arnaud Devred, Y Nabara
Abstract: A benchmarking experiment was conducted to compare strain measurement facilities at the National Institute of Standards and Technology (NIST) and the University of Twente. The critical current of a bronze-route Nb^d3^Sn wire, which was fabricated for ...

446. Strength distribution of single-crystal silicon theta-like specimens
Topic: Materials Science
Published: 5/18/2010
Authors: Michael S. Gaither, Frank W DelRio, Richard Swift Gates, Edwin R. Fuller, Robert Francis Cook
Abstract: A new test specimen has been developed for micro-scale tensile strength measurements, allowing direct assessment of surface effects on strength. Specimens were formed by deep reactive ion etching, tested with instrumented indentation, and test resul ...

447. Stress Response to Surface Alloying and De-Alloying During Under Potential Deposition of Pb on (111)-Textured Au
Topic: Materials Science
Published: 4/5/2010
Authors: Jae W. Shin, Ugo Bertocci, Gery R Stafford
Abstract: The stress during Pb underpotential deposition (upd) on (111)-textured Au has been examined on a cantilever beam electrode in perchloric acid supporting electrolyte. The upd peaks change from double to single going from higher to lower sweep rates, ...

448. Stresses in shape memory polymer-matrix nanocomposites for biomedical applications
Topic: Materials Science
Published: 6/1/2004
Authors: Davor Balzar, G Stefanic, Kenneth Gall, Martin Dunn, Yiping Liu
Abstract: We report on the residual stresses in amorphous shape memory polymers reinforced with SiC particles. After 50 % compression of the composite material at 25 ¿C, the SiC particles exhibit a compressive stress, which is almost completely released during ...

449. Strong Casimir force reduction by metallic surface nanostructuring
Topic: Materials Science
Published: 9/27/2013
Authors: Francesco Intravaia, Stefan T. Koev, Il Woong Jung, Albert A. Talin, Paul S Davids, Ricardo Decca, Vladimir A Aksyuk, Diego A. R. Dalvit, Daniel Lopez
Abstract: The Casimir force is a quantum-mechanical interaction arising from vacuum fluctuations of the electromagnetic (EM) field and is technologically significant in micro- and nanomechanical systems. Despite rapid progress in nanophotonics, the goal of e ...

450. Structural Changes behind the Diffuse Dielectric Response in AgNbO3
Topic: Materials Science
Published: 3/13/2009
Authors: Igor Levin, Victor Lvovich Krayzman, Joseph C Woicik, J. Karapetrova, T. Proffen, M. G. Tucker, I. M. Reaney
Abstract: Structural changes among the so-called M-polymorphs of AgNbO3 were analyzed using combined high-resolution X-ray diffraction, neutron total scattering, electron diffraction, and X-ray absorption fine structure measurements. These polymorphs crystall ...

Search NIST-wide:

(Search abstract and keywords)

Last Name:
First Name:

Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series