NIST logo

Publications Portal

You searched on:
Topic Area: Materials Science
Sorted by: title

Displaying records 31 to 40 of 523 records.
Resort by: Date / Title


31. Airbrushed Nanofiber Scaffolds Support Bone Marrow Stromal Cell Differentiation
Topic: Materials Science
Published: 11/1/2013
Authors: Carl George Simon Jr, Wojtek J Tutak, Sumona Sarkar, Tanya M. Farooque, Jyotsnendu (Jyotsnendu) Giri, Dongbo Wang, Sheng Lin-Gibson, Joachim Kohn, Durgadas Bolikal
Abstract: Nanofiber scaffolds are effective for tissue engineering since they emulate the fibrous nanostructure of native extracellular matrix (ECM). Although electrospinning has been the most common approach for fabricating nanofiber scaffolds, airbrushi ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=912293

32. An Analytical Approach to Cost-Effective, Risk-Based Budgeting for Federal Information System Security
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7385
Topic: Materials Science
Published: 1/1/2007
Authors: Barbara C. Lippiatt, Sieglinde K. Fuller
Abstract: The purpose of this report is to identify and illustrate an approach to simplify and strengthen capital planning for information system security in compliance with federal policy and guidance. The report provides the theoretical underpinnings of a me ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907292

33. An Octagonal Architecture for High Strength PIT Nb^d3^Sn Conductors
Topic: Materials Science
Published: 6/6/2006
Authors: L. R. Motowidlo, E Barzi, D. Turrioni, Najib Cheggour, Loren Frederick Goodrich
Abstract: Powder-in-Tube (PIT) Nb^d3^Sn conductors have been fabricated utilizing a low-cost intermetallic Cu^d5^Sn^d4^ powder as the tin source. A novel octagonal PIT design that incorporates dispersion strengthened copper as well as a hexagonal PIT design w ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=900875

34. An Overview of Robot-Sensor Calibration Methods for Evaluation of Perception Systems
Topic: Materials Science
Published: 3/22/2012
Authors: Mili Indra Shah, Roger D. Eastman, Tsai Hong Hong
Abstract: In this paper, an overview of methods that solve the robot-sensor calibration problem of the forms AX = XB and AX = YB is given. Each form will be split into three solutions: separable closed-form solutions, simultaneous closed- form solutions, and i ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910651

35. An Unexpected Crystal-Chemical Principle for the Pyrochlore Structure
Topic: Materials Science
Published: 7/18/2005
Authors: Terrell A Vanderah, M W. Lufaso
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=854249

36. An electrical pulse-heated Kosky bar technique for high strain rate flow stress measurements of rapidly heated metals
Topic: Materials Science
Published: 9/13/2009
Authors: Steven P Mates, Stephen W Banovic, Richard L. Rhorer, Timothy J Burns, Eric Paul Whitenton, D Basak
Abstract: We have developed a unique electrical pulse-heated Kolsky Bar technique for measuring the flow stress of metals at heating rates of up to 6000 °C per second and strain rates up to 10^4 per second. Under these conditions, which are approaching those f ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901787

37. Analysis of Welding Parameter Distribution in Stud Arc Welding
Topic: Materials Science
Published: 7/15/2007
Authors: Ivan Samardzic, Stefanija Klaric, Thomas Allen Siewert
Abstract: This paper describes the application of on-line monitoring system for recording welding current and voltage during stud arc welding with a ceramic ferrule. Recorded values of welding current and voltage are analyzed off-line for the weld process wi ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=50536

38. Analyzing Microstructure by Rietveld Refinement
Topic: Materials Science
Published: 6/1/2005
Authors: Davor Balzar, N C Popa
Abstract: Rietveld refinement has a primary purpose of refining crystal structure. However, this powerful technique is being increasingly used for obtaining microstructural information, such as texture, crystallite size, strain and stress, and crystalline defe ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=50140

39. Anisotropic elastic properties of nanocrystalline nickel thin films
Topic: Materials Science
Published: 5/1/2006
Authors: Donna C. Hurley, Roy Howard Geiss, N Jennett, Malgorzata Kopycinska-Mueller, A Maxwell, Jens Mueller, David Thomas Read, J Wright
Abstract: As length scales continue to shrink, new tools are needed to measure mechanical properties. We are developing two such tools using different nondestructive acoustical techniques. Surface acoustic wave spectroscopy (SAWS) uses laser-ultrasonic methods ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=50050

40. Application of an On-Line Weld Monitoring System
Topic: Materials Science
Published: 9/12/2002
Authors: Thomas Allen Siewert, Ivan Samardzic, Stefanija Klaric
Abstract: quisition analysis and real-time manipulation of the welding parameters offer added controls over the weld quality. Thanks to the continual development of information technology and electronics, it is possible to improve the systems for monitoring ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851294



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series