NIST logo

Publications Portal

You searched on: Topic Area: Manufacturing Sorted by: title

Your search results exceeded 1,000 records. Please refine your search and try again.
Displaying records 21 to 30 of 1000 records.
Resort by: Date / Title


21. A Careful Consideration of the Calibration Concept
Series: Journal of Research (NIST JRES)
Topic: Manufacturing
Published: 3/1/2001
Authors: Steven David Phillips, William Tyler Estler, Theodore D Doiron, K Eberhardt, M Levenson
Abstract: This paper is a detailed discussion of the technical aspects of the calibration process with emphasis on the definition of the measurand, the conditions under which the calibration results are valid, and the subsequent use of the calibration results ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823126

22. A Careful Consideration of the Calibration Concept
Topic: Manufacturing
Published: 1/1/2001
Authors: Steven David Phillips, William Tyler Estler, Theodore D Doiron, K Eberhardt, M. Levenson
Abstract: This paper is a detailed discussion of the technical aspects of the calibration process with emphasis on the definition of the measurand, the conditions under which the calibration results are valid, and the subsequent use of the calibration results ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=824612

23. A Case Study in Business Applications Development Using Open Source and Semantic Web Technologies
Topic: Manufacturing
Published: 4/1/2007
Authors: I Novicic, Z Kokovic, N Jakovljevic, V Ljubicic, M Bacetic, Nenad Anicic, Zuran Marjanovic, Nenad Ivezic
Abstract: Apollo is an open source, experimental Inventory Visibility (IV) application. The IV applications enable both suppliers and customers to have a Web view and to manage activities that affect the customer inventory based on a certain inventory replenis ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822659

24. A Component-based Approach for Manufacturing Simulation
Topic: Manufacturing
Published: 3/2/2011
Authors: Frank H Riddick, Yung-Tsun Tina Lee, Deogratias Kibira, Stephen B. Balakirsky
Abstract: Manufacturing systems can be very complex and are often costly to develop and operate. Simulation technology has been shown to be an effective tool for optimizing manufacturing system design, operations, and maintenance procedures. However, each manu ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908026

25. A Constrained Monte Carlo Simulation Method for the Calculation of CMM Measurement Uncertainty
Topic: Manufacturing
Published: 1/1/1999
Authors: Steven David Phillips, Bruce R. Borchardt, Daniel S Sawyer, William Tyler Estler, K Eberhardt, M Levenson, Marjorie A McClain, Ted Hopp
Abstract: We describe a Monte Carlo simulation technique where known information about a metrology system is employed as a constraint to distinguish the errors associated with the instrument under consideration from the set of all possible instrument errors. T ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820941

26. A Cross-Domain Survey of Metrics for Modeling and Evaluating Collisions
Topic: Manufacturing
Published: 11/28/2014
Authors: Jeremy A Marvel, Roger V Bostelman
Abstract: This paper provides a brief assessment of the metrics for measuring probability, degree, and severity of collisions as applied to autonomous and intelligent systems. Though not exhaustive, this survey evaluates the state-of-the-art of collision metr ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914652

27. A Decade of Commitment from the NIST Manufacturing Engineering Laboratory to Nanomanufacturing and Nanometrology
Topic: Manufacturing
Published: 8/27/2009
Authors: Kevin W Lyons, Michael T Postek
Abstract: Advanced research in nanomanufacturing technologies and processes has continued at an accelerating rate over the past decade. Profitable niche applications such as the use of carbon nanotubes for improving battery performance and nanoparticle-enhance ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902648

28. A Decision Guidance Framework for Sustainability Performance Analysis of Manufacturing Processes
Topic: Manufacturing
Published: 1/10/2015
Authors: Duck Bong Kim, Seungjun Shin, Guodong Shao, Alexander Brodsky
Abstract: Life-Cycle Assessment (LCA) methods are widely used to assess the sustainability of manufacturing processes. Although it has several advantages such as systematic estimation and efficiency, it has significant limitations due to lack of functionality ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=916454

29. A Detailed Discussion of Lessons Learned in Evaluating Emerging and Advanced Military Technologies
Topic: Manufacturing
Published: 6/3/2011
Authors: Craig I Schlenoff, Brian A Weiss, Michelle Potts Steves
Abstract: For the past six years, personnel from the National Institute of Standards and Technology (NIST) have served as the Independent Evaluation Team (IET) for two major DARPA programs. DARPA ASSIST (Advanced Soldier Sensor Information System and Technolog ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907576

30. A Differential Wavelength Meter for Laser Tuning
Topic: Manufacturing
Published: 1/1/1997
Authors: Lowell P. Howard, Jack A Stone Jr.
Abstract: A simple interferometer for matching the wavelengths of tunable lasers is described. Our interferometer uses the angular dispersion of a diffraction grating at the Littrow angle to produce a tilted wavefront with respect to a reference mirror in an o ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820845



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series