NIST logo

Publications Portal

You searched on: Topic Area: Manufacturing

Your search results exceeded 1,000 records. Please refine your search and try again.
Displaying records 41 to 50 of 1000 records.
Resort by: Date / Title


41. A Literature Review of Sensor Ontologies for Manufacturing Applications
Topic: Manufacturing
Published: 10/23/2013
Authors: Craig I Schlenoff, Tsai Hong Hong, Roger D. Eastman
Abstract: The purpose of this paper is to review existing sensor and sensor network ontologies to understand whether they can be reused as a basis for a manufacturing perception sensor ontology, or if the existing ontologies hold lessons for the development of ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914024

42. Theory and Algorithms for L1 Fitting Used for Planar Datum Establishment in Support of Tolerancing Standards
Topic: Manufacturing
Published: 10/15/2013
Authors: Craig M Shakarji, Vijay Srinivasan
Abstract: We present the theory and algorithms for establishing a datum plane consistent with ASME Y14.5 standard definitions corresponding to a planar datum feature sampled with coordinate data that is weighted,. The method uses a one-sided minimization searc ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913789

43. Controlling Foam Flammability and Mechanical Behavior by Tailoring the Composition of Clay-Based Multilayer Nanocoatings
Topic: Manufacturing
Published: 9/23/2013
Authors: Yu-Chin Li, Yeon S. Kim, John R Shields, Rick D Davis
Abstract: This is the most comprehensive evaluation of Layer-by-Layer (LbL) coatings intended to reduce the flammability of polymeric materials. Through a systematic variation of the coating recipe, an ideal combination of the coating attributes was ide ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913643

44. Conformance Test Architecture and Test Suite for ANSI/NIST-ITL 1-2011 NIEM XML Encoded Transactions
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7957
Topic: Manufacturing
Published: 9/18/2013
Authors: Fernando L Podio, Dylan James Yaga, Christofer J. McGinnis
Abstract: The latest version of the ANSI/NIST-ITL standard was published in November 2011 (AN-2011). In addition to specifying Record Types in traditional encoding, the standard includes the specification of National Information Exchange Model (NIEM) Extensibl ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914580

45. On the Enduring Appeal of Least-squares Fitting in Computational Coordinate Metrology
Topic: Manufacturing
Published: 9/6/2013
Authors: Vijay Srinivasan, Craig M Shakarji, Edward P Morse
Abstract: The vast majority of points collected with coordinate measuring machines are not used in isolation; rather, collections of these points are associated with geometric features through fitting routines. In manufacturing applications, there are two fund ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907559

46. Analysis of Implanted Silicon Dopant Profiles
Topic: Manufacturing
Published: 9/1/2013
Authors: B. P. Geiser, Eric B Steel, Karen T Henry, D. Olson, T.J. Prosa
Abstract: Atom probe tomography implant dose measurements are reported for National Institute of Standards and Technology Standard Reference Material 2134 (As implant). Efforts were taken to manufacture specimens with limited variation in size and shape to mi ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=912365

47. Theory and Algorithms for Weighted Total Least-Squares Fitting of Lines, Planes, and Parallel Planes to Support Tolerancing Standards
Topic: Manufacturing
Published: 8/16/2013
Authors: Craig M Shakarji, Vijay Srinivasan
Abstract: We present the theory and algorithms for fitting a line, a plane, two parallel planes (corresponding to a slot or a slab) or many parallel planes in a total (orthogonal) least-squares sense to coordinate data that is weighted. Each of these problems ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=912180

48. Sustainable Process Analytics Formalism: A Case Study of Book Binding System for Energy Optimization
Topic: Manufacturing
Published: 8/7/2013
Authors: Duck Bong Kim, Guodong Shao, Alexander Brodsky, Ryan Consylman
Abstract: Energy is considered as one of important factors in sustainable manufacturing due to its relevance to depletion of material resources and generation of carbon oxide. To improve energy efficiency in manufacturing, optimization techniques are essential ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913129

49. Multi-Relationship Evaluation Design: Formalization Of An Automatic Test Plan Generator
Topic: Manufacturing
Published: 7/26/2013
Authors: Brian A Weiss, Linda C. Schmidt
Abstract: The number of intelligent and advanced technologies in the manufacturing, military and homeland security industries is increasing. Evaluating these technologies is a critical step in their development cycle. Test designers have put forth considerable ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913054

50. Challenges of the Changing Robot Markets
Topic: Manufacturing
Published: 7/19/2013
Authors: Gurvinder Singh Virk, Carol Herman, Roger V Bostelman, Tamas Haidegger
Abstract: Service robots are becoming an integrated part of daily life, entering even the most complex scenarios, yet at a slower pace than previously anticipated. This paper presents an overview of the changing area of robotics and the new challenges being fa ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913708



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series